Great Little Trading Lolly & Scoop Ice Cream Shop L4175 User manual

1
Lolly & Scoop Ice Cream Shop
22/03/2021
V2
easy - medium - hard
Assembly Difculty
one-person job
L4175
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• Please read these instructions carefully before assembly.
• Adult assembly required.
• Unassembled product contains small parts which may present a
choking hazard.
• Not suitable for children under 3 years due to small parts that may
become detached and present a choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• Assemble and use on a at and level surface.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check item regularly for signs of damage which may make the product
unsafe.
• Check all xtures and ttings regularly and tighten as necessary.
• Complies to the European Toy Safety Directive.
• DO NOT use this item if any components are missing or damaged.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you
Registered Address:
GLTC Ltd, 12 Buckhold Road,
Wandsworth, London, SW18 4GP, United Kingdom
Authorised Representative:Authorised
Representative Service, 77 Camden Street Lower,
Dublin, D02 XE80, Ireland

3
Component Check List
You will need
(not supplied)
Phillips Head
Screwdriver
A B C D
E F G H
I J K L
M N
1x 1x 1x 1x
1x 1x 1x 1x
1x 1x 1x 2x
1x 1x
3x 6x 3x 1x
1x 1x 1x 6x
2x 1x
#1
9x Medium Screws
21mmL
13x Barrel Nuts
7mm dia
13x Barrel Nut Bolts
40mmL
#2 #3 #4
#6 #7
1x Cylinder Screw
29mmL
1x Platform Screw
24mmL
1x Washer
12mm dia

4
Hardware for Step 1:
3x #2 barrel nut bolts
STEP 1:
Attach panel B to panels C and D using 3x barrel nuts and
bolts.
When attaching panel C to panel D, ensure the small hole
in the middle of the panel is nearer the top surface. You
will need this for step 3.
3x #1 barrel nuts
STEP 2:
Now attach the base panel (E) to panel B using 1x barrel nut and bolt.
STEP 4:
Loosely attach panel I to panels D and C using 4x barrel nuts
and bolts. Now slot panel H between panels G and I.
With panel H now in position you can fully tighten the
barrel nuts and bolts.
Hardware for Step 3:
2x #2 barrel nut bolts
2x #1 barrel nuts
1x #3 21mmL screw
Hardware for Step 2:
1x #2 barrel nut bolts
1x #1 barrel nuts
Hardware for Step 2:
4x #2 barrel nut bolts
4x #1 barrel nuts
#2
B
#2
#2
#1
#1
#1
C
D
E
#2
#1
#1
#1
#2 #2
#3
G
I
B
STEP 3:
Slot panel F into the slots on
panel B and G. Now secure
panel G to panel E using 2x
barrel nuts and bolts.
Now secure panel G to panel C
using 1x screw (#3).
C
D
E
B
G
#2
#2
#2
#2 #1
#1
#1
#1
D
C
H
F
groove should be at back
groove should be at back

5
STEP 5:
Attach cylinder K to panel J using 1x screw (#4).
Attach panels L to panel J using 4x screws (#3).
STEP 6:
Loosely attach the
top assembly to
the completed base
assembly using 3x barrel
nuts and bolts.
Now carefully place
sliding door in the
grooves between panels
J and F/H.With the door
in place, now fully tighten
the the barrel nuts and
bolts.
STEP 7:
Secure the top section (M) to the cylinder (K) using 1x screw (#6) and washer
(#7). Now secure the lolly stand (N) to pieces (L) using 4x screws (#3).
J
#3
K
L
L
#3
#3 #3
#4
#1
#1 #1
#2 #2
#2
A
M
N
Hardware for Step 5:
1x #4 29mmL screw
4x #3 21mmL screws
Hardware for Step 6:
3x #2 barrel nut bolts
3x #1 barrel nuts
Hardware for Step 7:
1x #6 24mmL screw
4x #3 21mmL screws
1x #7 12mm dia
#3 #3
#3 #3
#6
#7
J
F
H
The assembly is now complete.
Copyright© 2017 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
K
L
L