Great Little Trading L4711 User manual

1
Construction Site
22/03/2021
V2
easy - medium - hard
Assembly Difculty
one-person job
L4711
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• Adult assembly required.
• Unassembled product contains small parts which may present a
choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• Not suitable for children under 3 years due to small parts which
present a choking hazard.
• Assemble and use on a at and level surface.
• To avoid possible injury, DO NOT allow children to climb/stand on the
product.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check item regularly for signs of damage which may make the product
unsafe.
• Check all xtures and ttings regularly and tighten as necessary.
• Complies to the European Toy Safety Directive.
• DO NOT use this item if any structural components are missing or
damaged.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you
Registered Address:
GLTC Ltd, 12 Buckhold Road,
Wandsworth, London, SW18 4GP, United Kingdom
Authorised Representative:Authorised
Representative Service, 77 Camden Street Lower,
Dublin, D02 XE80, Ireland

3
Component Check List
You will need
(not supplied)
Phillips Head
Screwdriver
A B C D
E F G H
I J K L
M N
1x 4x 1x 1x
2x 1x 1x 1x
1x 1x 1x 1x
1x 1x
#1
4x 12mmL Screws
10x 19mmL Screws
#2
1x 1x
1x 1x 2x 4x
6x 2x
S T
U V
O P
Q R
W
1x
X
9x

4
STEP 1:
Screw in long post (C) to base panel (A) using 1x screw (#1). Screw 4x short
posts (B) into base panel A using 4x screws (#1).
STEP 2:
Attach part D to posts by lining up the holes with the dowels.
Attach both ramps (E) to both sides by lining up dowels then secure to base
A with 4x screws (#2).
STEP 3:
Attach ramp (G) to part F using 2x screws (#1).
STEP 4:
Now place part H between parts F and I by connecting the dowels.
A
B
#1
Hardware for Step 1:
5x #1 19mmL Screws
Hardware for Step 2:
4x #2 12mmL Screws
B
BB
C
#1
#1 #1
#1
D
E
E
#2 #2
#2 #2
F
G
#1
#1
H
I
Hardware for Step 3:
2x #1 19mmL Screws
F

5
STEP 6:
Now connect the assembled sections together by connecting the dowels.
STEP 8:
Put the roof panel N in place.
STEP 5:
Slot parts L and M into part K by connecting dowels then insert J into K as shown.
STEP 7:
Insert the assembled top section into the base by connecting the dowels. Use 1x
screw (#1) to secure corner to post. Press down gently to ensure they’re in place
and everything is level.
K
J
L
M
#1
N
Hardware for Step 7:
1x #1 19mmL Screws

6Copyright© 2019 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
STEP 10:
The assembly is now complete.
Slot the base panels together and add the accessories.
STEP 9:
Attach the crane O to base P using 2x screws (#1).
#1 #1
Q
Hardware for Step 9:
2x #1 19mmL Screws
P
O