Greenheck ESD-603 User manual

®
Aignment Plate Installation 1
®
Document 482876
Alignment Plate Installation
Models: ESD-603, EDJ-601; ESD-635. ESJ-602, ESD-635X
Alignment Plate #508290
Installation, Operation and Maintenance Manual
Please read and save these instructions for future reference. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety information. Failure
to comply with these instructions will result in voiding of the product warranty and may result in personal injury
and/or property damage.
Front View

482876 • Alignment Plate Installation, Rev. 2, January 2019 Copyright 2019 © Greenheck Fan Corporation2
As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications
without notice.
Product warranties can be found online at Greenheck.com, either on the specific product page or in the literature
section of the website at Greenheck.com/Resources/Library/Literature.
®
Phone: [phone] • Fax: [phone] • Parts: 800.355.5354 • E-mail: [email protected] • Website: www.greenheck.com
Our Commitment
Step 1
Units that are to be field stacked will be shipped with alignment
plate(s) to be field installed. Remove the appropriate amount of
blade screws that hold the blade nearest the splice joint of the
mating section (reference model details).
Step 2
Stack the sections together.
Step 3
Attach plates by re-installing blade screws through alignment
plate(s), through jambs, and into screw bosses that are extruded
in blades.
INSTALLATION GUIDELINES
ESD-603
EDJ-601, ESJ-602
ESD-635, ESD-635X