Greenheck ESK-402 Installation and operating instructions

®
Aignment Plate Installation 1
®
Document 482875
Alignment Plate Installation
Models: SEH-401, SED-401, EDJ-401, EDK-402, ESK-402,
EDK-430, ESD-403, ESD-435, ESJ-401, ESD-435X
Alignment Plate #508291
Installation, Operation and Maintenance Manual
Please read and save these instructions for future reference. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety information. Failure
to comply with these instructions will result in voiding of the product warranty and may result in personal injury
and/or property damage.
Front View

Alignment Plate Installation2
®
SEH-401, SED-401 EDJ-401, EDK-402, ESK-402
EDJ-430, EDK-430 ESD-403
Step 1
Units that are to be field stacked will be shipped with alignment
plate(s) to be field installed. Remove the appropriate amount of
blade screws that hold the blade nearest the splice joint of the
mating section (reference model details).
Step 2
Stack the sections together.
Step 3
Attach plates by re-installing blade screws through alignment
plate(s), through jambs, and into screw bosses that are extruded
in blades.
INSTALLATION GUIDELINES

482875 • Alignment Plate Installation, Rev. 2, January 2019 Copyright 2019 © Greenheck Fan Corporation3
As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications
without notice.
Product warranties can be found online at Greenheck.com, either on the specific product page or in the literature
section of the website at Greenheck.com/Resources/Library/Literature.
®
Phone: [phone] • Fax: [phone] • Parts: 800.355.5354 • E-mail: [email protected] • Website: www.greenheck.com
Our Commitment
ESD-435 ESJ-401
ESD-435X