Grizzly G5913Z User manual

COPYRIGHT © MAY, 2020 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#CS21113 PRINTED IN TAIWAN
The following change was made since the owner's manual was printed:
• Switch assembly changed.
Aside from this information, all other content in the owner's manual applies and MUST be read and under-
stood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference.
For questions or help, contact our Tech Support at [phone] or [email protected].
READ THIS FIRST
For questions or help with this product contact Tech Support at [phone] or [e-mail]
Model G5913Z/G7215Z
***IMPORTANT UPDATE***
For Machines Mfd. Since 03/06
and Owner's Manual Revised 03/07
Revised Parts Breakdown
5
6V2
6V2-1 6V2-2
6V2-3 6V2-4
6V2-5 6V2-6
REF PART # DESCRIPTION
6V2 P5913Z006V2 SWITCH ASSY 5 HP V2.03.06
6V2-1 P5913Z006V2-1 E-STOP BUTTON
6V2-2 P5913Z006V2-2 ROUND GREEN ON SWITCH
6V2-3 P5913Z006V2-3 ROUND RED OFF SWITCH
6V2-4 P5913Z006V2-4 F/O/R SWITCH KEDU ZH-HC-31-BY (G5913Z)
6V2-4 P7215Z006V2-4 F/O/R SWITCH KEDU ZH-HC-433-BY (G7215Z)
6V2-5 P5913Z006V2-5 CONTACTOR (G5913Z)
6V2-5 P7215Z006V2-5 CONTACTOR (G7215Z)
6V2-6 P5913Z006V2-6 OVERLOAD RELAY (G5913Z)
6V2-6 P7215Z006V2-6 OVERLOAD RELAY (G7215Z)

-2- Model G5913Z/G7215Z (Mfd. Since 03/06)
SHOCK HAZARD. Working on wiring that is con-
nected to a power source is extremely dangerous.
Touching electrified parts will result in personal
injury including but not limited to severe burns,
electrocution, or death. Disconnect the power
from the machine before servicing electrical com-
ponents!
MODIFICATIONS. Modifying the wiring beyond
what is shown in the diagram may lead to unpre-
dictable results, including serious injury or fire.
This includes the installation of unapproved after-
market parts.
WIRE CONNECTIONS. All connections must
be tight to prevent wires from loosening during
machine operation. Double-check all wires dis-
connected or connected during any wiring task to
ensure tight connections.
CIRCUIT REQUIREMENTS. You MUST follow
the requirements at the beginning of this manual
when connecting your machine to a power source.
WIRE/COMPONENT DAMAGE. Damaged wires
or components increase the risk of serious per-
sonal injury, fire, or machine damage. If you notice
that any wires or components are damaged while
performing a wiring task, replace those wires or
components.
MOTOR WIRING. The motor wiring shown in
these diagrams is current at the time of printing
but may not match your machine. If you find this
to be the case, use the wiring diagram inside the
motor junction box.
CAPACITORS/INVERTERS. Some capacitors
and power inverters store an electrical charge for
up to 10 minutes after being disconnected from
the power source. To reduce the risk of being
shocked, wait at least this long before working on
capacitors.
EXPERIENCING DIFFICULTIES. If you are expe-
riencing difficulties understanding the information
included in this section, contact our Technical
Support at [phone].
Wiring Safety Instructions
SECTION 8: WIRING
machine
These pages are current at the time of printing. However, in the spirit of improvement, we may make chang-
es to the electrical systems of future machines. Compare the manufacture date of your machine to the one
stated in this update, and study this section carefully.
If there are differences between your machine and what is shown in this section, call Technical Support at
[phone] for assistance BEFORE making any changes to the wiring on your machine. An updated
wiring diagram may be available. Note: Please gather the serial number and manufacture date of your
machine before calling. This information can be found on the main machine label.

Model G5913Z/G7215Z (Mfd. Since 03/06) -3-
READ ELECTRICAL SAFETY
ON PAGE 2OF UPDATE
(Replaces Page 34)
G5913Z Wiring Diagram

-4- Model G5913Z/G7215Z (Mfd. Since 03/06)
READ ELECTRICAL SAFETY
ON PAGE 2OF UPDATE
(Replaces Page 35)
G7215Z Wiring Diagram

COPYRIGHT © MARCH, 2017 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL18760 PRINTED IN TAIWAN
The following changes were recently made to this machine since the owner's manual was printed:
• Added an additional spindle enclosure guard.
• Changed spindle cartridge support fasteners.
Aside from this information, all other content in the owner's manual applies and MUST be read and under-
stood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference.
For questions or help, contact our Tech Support at [phone] or [email protected].
READ THIS FIRST
For questions or help with this product contact Tech Support at [phone] or [e-mail]
Model G5913Z/G7215Z/G8622
***IMPORTANT UPDATE***
For Machines Mfd. Since 1/17
and Owner's Manual Printed 2001
12
168
169
13
72
170
170
171
172
123
123
New Parts
REF PART # DESCRIPTION
12 P5913Z012 HEX NUT 3/8-16
13 P5913Z013 LOCK WASHER 3/8
123 P5913Z123 LOCK WASHER 1/4
168 P5913Z168 SET SCREW 3/8-16 X 1
169 P5913Z169 SET SCREW 3/8-16 X 1/2
170 P5913Z170 KNOB BOLT 1/4-20 X 1/2
171 P5913Z171 FRONT GUARD EXTENSION PLATE
172 P5913Z172 FRONT SPINDLE ENCLOSURE GUARD
New Inventory
Inventory Qty
A. Front Spindle Enclosure Guard .................. 1
B. Front Guard Extension Plate ...................... 1
C. V-Belt A28 (G8622) .................................... 1
D. Knob Bolts 1⁄4"-20 x 1⁄2" .............................. 2
E. Flat Washers 1⁄4" ......................................... 4
F. Knob Bolts 3⁄8"-16 x 1" (G5913Z, G7215Z) . 2
F. Knob Bolts 3⁄8"-16 x 1" (G8622) .................. 4
G. Spacer Set (G8622—Not Shown) ............ 22
AC
DEF
B

-2- G5913Z-G8622 Update (Mfd. Since 1/17)
Attaching Spindle Enclosure Guard
Before attaching the spindle enclosure guard,
follow instructions in the Owner's Manual for
installing the cutter guard and attaching the safety
guard (for G5913Z/G7215Z, see Pages 18–19;
for G8622, see Pages 14–15).
To attach spindle enclosure guard:
1. Attach front guard extension plate to thread-
ed holes on front of safety guard with (2) 1⁄4"-
20 x 1⁄2" knob bolts and (2) 1⁄4" flat washers
(see Figure 1).
2. Attach front spindle enclosure guard to exten-
sion plate with (2) 1⁄4"-20 x 1⁄2" knob bolts and
(2) 1⁄4" flat washers (see Figure 1).
Spindle Enclosure Guard Positioning
The spindle enclosure guard protects the user
from exposure to the cutter and chips thrown by
it. To minimize the risk of injury, the spindle enclo-
sure guard must be adjusted so it encloses as
much of the spindle area as possible, while still
allowing the workpiece to pass through the cut.
Typically this means the front guard is positioned
to just clear the top of the workpiece.
To position the spindle enclosure guard, loosen
the top knob bolts and slide the extension plate in
or out, then loosen the front knob bolts and raise
or lower the spindle enclosure guard as needed.
Tighten the knob bolts to secure the setting.
All guards MUST be
installed on your shaper
before operating it.
Shapers can quickly cause
serious injury if some kind
of guard is not used. To
reduce your risk of injury,
read and follow the entire
Owner's Manual carefully
and do additional research
on shop-made guards and
safety jigs.
Figure 1. Front guard extension plate and
spindle enclosure guard attached to safety
guard.
1⁄4"-20 x 1⁄2"
Knob Bolt
Safety Guard
Front Guard Extension
Plate
1⁄4" Flat Washer
Front Spindle Enclosure
Guard

8DENG><=I'%%&7N<G>OOAN>C9JHIG>6A!>C8#G:K>H:9B6G8=!'%%,IG
7!2.).'./0/24)/./&4()3-!.5!,-!9"%2%02/$5#%$).!.93(!0%
/2&/2-7)4(/544(%72)44%.!002/6!,/&'2)::,9).$5342)!,).#
IG('*%EG>CI:9>CI6>L6C
-/$%,':':
(%!69$5493(!0%2
/7.%2g3-!.5!,

4HISMANUALPROVIDESCRITICALSAFETYINSTRUCTIONSONTHEPROPERSETUP
OPERATIONMAINTENANCEANDSERVICEOFTHISMACHINEEQUIPMENT
&AILURETOREADUNDERSTANDANDFOLLOWTHEINSTRUCTIONSGIVENINTHIS
MANUALMAYRESULTINSERIOUSPERSONALINJURYINCLUDINGAMPUTATION
ELECTROCUTIONORDEATH
4HEOWNEROFTHISMACHINEEQUIPMENTISSOLELYRESPONSIBLEFORITS
SAFEUSE4HISRESPONSIBILITYINCLUDESBUTISNOTLIMITEDTOPROPER
INSTALLATIONINASAFEENVIRONMENTPERSONNELTRAININGANDUSAGE
AUTHORIZATIONPROPERINSPECTIONANDMAINTENANCEMANUALAVAILABILITY
ANDCOMPREHENSIONAPPLICATIONOFSAFETYDEVICESBLADECUTTERINTEG
RITYANDTHEUSAGEOFPERSONALPROTECTIVEEQUIPMENT
4HEMANUFACTURERWILLNOTBEHELDLIABLEFORINJURYORPROPERTYDAMAGE
FROMNEGLIGENCEIMPROPERTRAININGMACHINEMODIFICATIONSORMISUSE
3OMEDUSTCREATEDBYPOWERSANDINGSAWINGGRINDINGDRILLINGAND
OTHERCONSTRUCTIONACTIVITIESCONTAINSCHEMICALSKNOWNTOTHE3TATE
OF#ALIFORNIATOCAUSECANCERBIRTHDEFECTSOROTHERREPRODUCTIVE
HARM3OMEEXAMPLESOFTHESECHEMICALSARE
s ,EADFROMLEADBASEDPAINTS
s #RYSTALLINESILICAFROMBRICKSCEMENTANDOTHERMASONRYPRODUCTS
s !RSENICANDCHROMIUMFROMCHEMICALLYTREATEDLUMBER
9OURRISKFROMTHESEEXPOSURESVARIESDEPENDINGONHOWOFTENYOU
DOTHISTYPEOFWORK4OREDUCEYOUREXPOSURETOTHESECHEMICALS
7ORKINAWELLVENTILATEDAREAANDWORKWITHAPPROVEDSAFETYEQUIP
MENTSUCHASTHOSEDUSTMASKSTHATARESPECIALLYDESIGNEDTOFILTER
OUTMICROSCOPICPARTICLES

4ABLEOF#ONTENTS
).42/$5#4)/. 
;dgZldgY######################################################## '
8dciVXi>c[d###################################################'
<*.&(OBVX]^cZ9ViVH]ZZi######################## (
<,'&*OBVX]^cZ9ViVH]ZZi######################## *
3%#4)/.3!&%49 
HV[Zin>chigjXi^dch[dgBVX]^cZgn################## ,
6YY^i^dcVaHV[Zin>chigjXi^dch[dgH]VeZgh##### .
3%#4)/.#)2#5)42%15)2%-%.43 
GZl^g^c\id))%K######################################### &&
3%#4)/.3%450 
HZijeHV[Zin################################################ &'
>iZbhCZZYZY[dgHZije############################### &'
JceVX`^c\#################################################### &'
E^ZXZ>ckZcidgn############################################ &(
=VgYlVgZGZXd\c^i^dc8]Vgi####################### &)
8aZVcJe###################################################### &*
H^iZ8dch^YZgVi^dch###################################### &*
Hl^iX]EZYZhiVa########################################### &+
He^cYaZ######################################################### &+
=VcYaZh########################################################&,
<jVgY########################################################### &-
;ZcXZ6hhZbWan########################################## &-
<jVgY8dkZg################################################ &.
=VcYl]ZZa=VcYaZ###################################### &.
=daY"9dlch################################################# '%
3%#4)/.!$*534-%.43 
EjaaZnhK"7Zai########################################### '&
K"7ZaiIZch^dc############################################# ''
HeZZY8]Vc\Zh########################################### ''
;ZcXZ6Y_jhibZci######################################## '(
6a^\c^c\;ZcXZh########################################### '(
I^ai^c\He^cYaZ############################################## '(
IVWaZ>chZgih################################################ ')
IZhiGjc###################################################### ')
3%#4)/./0%2!4)/. 
GdiVi^dc######################################################## '*
8jiiZg>chiVaaVi^dc######################################### '+
He^cYaZ=Z^\]i############################################# ',
HigV^\]iH]Ve^c\########################################## ',
GjW8daaVgh################################################## '.
EViiZgcLdg`################################################ (%
;gZZ]VcYH]Ve^c\####################################### (&
H]deBVYZH]VeZg6XXZhhdg^Zh################# (&
3%#4)/.!##%33/2)%3 
3%#4)/.-!).4%.!.#% 
HX]ZYjaZ###################################################### ((
8aZVc^c\#######################################################((
JceV^ciZY8Vhi>gdc##################################### ((
K"7Zai########################################################### ((
<*.&(OL^g^c\9^V\gVb############################## ()
<,'&*OL^g^c\9^V\gVb############################## (*
8VW^cZiEVgih7gZV`Ydlc############################ (+
BdidgEVgih7gZV`Ydlc############################### (-
He^cYaZEVgih7gZV`Ydlc############################ )%
;ZcXZ<jVgY7gZV`Ydlc############################# )'
HV[ZinAVWZaEVgih7gZV`Ydlc#################### ))
7!22!.49!.$2%452.3 

"'" <*.&(O$<,'&*O=ZVkn"9jinH]VeZg
).42/$5#4)/.
&OREWORD
LZVgZegdjYidd[[Zgi]ZBdYZa<*.&(O$<,'&*O
CVbZd[BVX]^cZ#I]^hbVX]^cZ^heVgid[V\gdl"
^c\<g^ooan[Vb^and[[^cZlddYldg`^c\bVX]^cZgn#
L]ZcjhZYVXXdgY^c\idi]Z\j^YZa^cZhhZi[dgi]^c
i]^hbVcjVa!ndjXVcZmeZXinZVghd[igdjWaZ"[gZZ!
Zc_dnVWaZ deZgVi^dc VcY egdd[ d[ <g^ooan»h Xdb"
b^ibZciidXjhidbZghVi^h[VXi^dc#
I]Z heZX^[^XVi^dch! YgVl^c\h! VcY e]did\gVe]h
^aajhigViZY ^c i]^h bVcjVa gZegZhZci i]Z BdYZa
<*.&(O$<,'&*Ol]Zci]ZbVcjValVhegZeVgZY#
=dlZkZg!dl^c\id<g^ooan»heda^Xnd[Xdci^cjdjh
^begdkZbZci!X]Vc\ZhbVnWZbVYZViVcni^bZ
l^i]cddWa^\Vi^dcdci]ZeVgid[<g^ooan#
;dg ndjg XdckZc^ZcXZ! lZ ValVnh `ZZe XjggZci
<g^ooanbVcjVahVkV^aVWaZdcdjglZWh^iZViWWW
GRIZZLYCOM#6cnjeYViZhidndjgbVX]^cZl^aaWZ
gZ[aZXiZY ^c i]ZhZ bVcjVah Vh hddc Vh i]Zn VgZ
XdbeaZiZ#K^h^idjgh^iZd[iZcidX]ZX`[dgi]ZaVi"
ZhijeYViZhidi]^hbVcjVa
>[ndj]VkZVcnXdbbZcihgZ\VgY^c\i]^hbVcjVa!
eaZVhZlg^iZidjhVii]ZVYYgZhhWZadl/
<g^ooan>cYjhig^Va!>cX#
8$DIZX]c^XVa9dXjbZciVi^dcBVcV\Zg
E#D#7dm'%+.
7Zaa^c\]Vb!L6.-'',"'%+.
:bV^a/bVcjVah5\g^ooan#Xdb
LZhiVcYWZ]^cYdjgbVX]^cZh#>[ndj]VkZVcn
hZgk^XZfjZhi^dchdgeVgihgZfjZhih!eaZVhZXVaadg
lg^iZjhVii]ZadXVi^dca^hiZYWZadl#
<g^ooan>cYjhig^Va!>cX#
&'%(AnXdb^c\BVaa8^gXaZ
BjcXn!E6&,,*+
E]dcZ/*,%*)+".++(
;Vm/-%%)(-"*.%&
:"BV^a/iZX]hjeedgi5\g^ooan#Xdb
LZWH^iZ/]iie/$$lll#\g^ooan#Xdb
#ONTACT)NFO