GW Instek GUT-6600A User manual

GUT-6600A
Handy Digital IC Tester
USER MANUAL

CONTENTS
I.GENERAL SPECIFICATION ....................................2
II.FUNCTION KEYS ................................................... .3
III.OPERATION............................................................ 4
IV.SUPPORTED DEVICES .......................................... 6
-1-

*Getting Started
The GUT-6600A can be powered in two ways:
1.Insert TWO 9V batteries (in the bottom of the GUT-6600A, polarity as indicated).
2.Connect a 9 Volt 500 mA DC adapter to the power connector on the back. Use a
2.1 mm plug with the positive pole outside.
*Do not use batteries or adapters with other plug types, polarity or voltages, your
equipment may be damaged.
I. GENERAL SPECIFICATION
Test Voltage:
Average Search Time:
Power Supply:
Dimensions:
Net weight:
Operating temperature:
Storage Temperature:
16 characters in 1 line(LCD Dot Matrix)
14 to 24 pins
TTL74xxx, CMOS40xxx, CMOS45xxx,
DRIVER2xxx
5.0V, 3.3V, 3.0V, 2.5V
0.6 second
2 x 9 volt battery
9V / DC 500mAadapter
160 × 110 × 45 mm (L W H)
0.4 kg(not included battery)
10 °C to 50 °C
-20 °C to 80 °C
-2-
Display:
Test Pins:
Testable IC series:

II. FUNCTION KEYS
Power on:
Power off:
TYPE key:
UP [▲] key:
DOWN [▼] key:
AUTO key:
TEST key:
VOLT.SET:
Select Voltage:
Select AUTO:
Power-Off times:
Press POWER-ON / TEST key to switch on the GUT-6600A
Simultaneously press TYPE and DOWN keys to switch off.
Select IC family.
Back to the previous IC number within the selected series.
Forward to the next IC number within the selected series.
Auto-search compares the inserted IC to all known IC
numbers in the database
Test inserted IC with the functions of the selected IC number.
Press [AUTO] and [▼]Key to switch the voltage. The cycle is
5V,3.3V,3V,2.5V.
Simultaneously press AUTO and DOWN keys to select IC
VCC.
Simultaneously press TYPE and UP keys to select AUTO
Power-Off times.
-3-

III. OPERATION
1.Press the “TEST” key to switch on the GUT-6600A.
After this, the GUT-6600A will perform a self-test ("SYSTEM CHECK...").
If there are no internal errors, the display will show "SYSTEM READY !!".
2.Insert the IC into the ZIF socket in the following position:
3.Now you can select the IC Type by pressing the “TYPE” key:
TTL74xxx "[1] 7400"
CMOS40xxx "[2] 4000"
CMOS45xxx "[3] 4501"
DRIVE "[4] ULN2001"
4.(a)After this, you can select the IC number with the UP [▲] and DOWN [▼]
keys. If you hold down the key, the device numbers will automatically
increment [▼]
or decrement [▲].
Then, select the IC VCC. The GUT-6600A provides 5.0V, 3.3V,3.0V,2.5V 4 kinds of
voltage. We can press "AUTO" and "UP" or "DOWN" for selection. The default is
5.0V. When you change the IC, the voltage will come back to 5.0V.
(b)Another way to select an IC: You can press the AUTO key.(Before press “AUTO”,
please set voltage first)
The GUT-6600A will compare the inserted IC
component to the components in its database. The GUT-6600A will return the first
component number from its database, which matches the inserted device. This is
not necessarily the correct component. By pressing the AUTO key again, the GUT-
6600A will search the remainder of its database.
When a component has been found, the display will show "[X] NNNNN FIND"
where X stands for the IC type and NNNNN for the IC number.
If a component does not match any device in the database of the LEAPER-1A, the
display will show
"** NOT FOUND **".
-4-

5.Now you can test the IC by pressing the TEST key:
If the device performs OK, the display shows:
"[X] NNNNN PASS"
If the device test fails, the display shows:
"[X] NNNNN FAIL"
(X stands for the IC type and NNNNN for the IC number)
By pressing the TYPE and DOWN [▼] keys simultaneously.
The GUT-6600A will be automatically turn off after idle 90 seconds by the default.
We can adjust the automatically turn off time to 30s, 1m30s, 3m or Never. After
restart the GUT-6600A, it will come back to the default 90 seconds.
6.Now you can test another IC or you can switch off the GUT-6600A
-5-

IV. SUPPORTED DEVICES
74 Series
7400
7407
7414
7421
7428
7437
7445
74H52
7463
7475
7483
7491
74107
74116
74135
74142
74151
74158
74165
74175
74182
74192
74199
74244
74253
74273
74290
74347
74364
74375
74393
74447
74519
74540
74580
7401
7408
7415
7422
7430
7438
7446
7453
7464
7477
7484
7492
74109
74125
74136
74143
74152
74159
74166
74176
74183
74193
74230
74245
74257
74274
74293
74348
74365
74377
74395
74465
74520
74541
74597
7402
7409
7416
7423
7432
7439
7447
7454
7465
7478
7485
7493
74110
74126
74137
74144
74153
74160
74168
74177
74184
74194
74231
74246
74258
74276
74295
74350
74366
74378
74399
74466
74521
74563
74620
7403
7410
7417
7424
7433
7440
7448
74H54
7470
74H78
7486
7494
74111
74128
74138
74145
74154
74161
74169
74178
74185
74195
74240
74247
74259
74279
74298
74351
74367
74379
74412
74467
74522
74564
74621
7404
7411
7418
7425
7434
7441
7449
7455
7472
7480
7487
7495
74112
74132
74139
74147
74155
74162
74170
74179
74189
74196
74241
74248
74260
74280
74299
74352
74368
74382
74425
74468
74533
74573
74622
7405
7412
7419
7426
7435
7442
7450
7460
7473
7481
7489
7496
74113
74133
74140
74148
74156
74163
74173
74180
74190
74197
74242
74249
74265
74283
74322
74353
74373
74386
74426
74490
74534
74574
74623
7406
7413
7420
7427
7436
7443
7451
74H61
7474
7482
7490
74105
74114
74134
74141
74150
74157
74164
74174
74181
74191
74198
74243
74251
74266
74289
74323
74363
74374
74390
74445
74518
74539
74576
74638
-6-

74 Series (continued)
7463974640
7464674647
7468274683
7479674797
7481174821
741002741003
741020741034
40 Series
4000
4010
4017
4024
4031
4042
4052
4066
4073
4082
4097
40106
40163
40194
45 Series
4501
4511
4518
4532
4560
4001
4011
4018
4025
4032
4043
4053
4067
4075
4085
4099
40109
40174
40257
4502
4512
4519
4539
4561
74641
74652
74684
74798
74827
741004
741035
4002
4012
4019
4026
4033
4044
4054
4068
4076
4086
40100
40110
40175
74642
74654
74685
74804
74832
741005
741036
4006
4013
4020
4027
4035
4048
4055
4069
4077
4093
40101
40147
40181
74643
74668
74688
74805
74841
741008
741244
4007
4014
4021
4028
4038
4049
4056
4070
4078
4094
40102
40160
40182
74644
74669
74689
74808
74874
741010
741245
4008
4015
4022
4029
4040
4050
4060
4071
40H78
4095
40103
40161
40192
74645
74670
74795
74810
741000
741011
4009
4016
4023
4030
4041
4051
4063
4072
4081
4096
40104
40162
40193
4503
4513
4520
4543
4566
4504
4514
4522
4551
4572
414000
4506
4515
4526
4553
4581
4508
4516
4527
4555
4584
4510
4517
4529
4556
4585
41 Series (DRAM 1-bit)
416441256411000
44 Series (DRAM 4-bit)
446444256441000
Driver
ULN2001
ULN2005 ULN2003
ULN2803 ULN2004 ULN2804
** 74756 74574 need to be selected manually. **
-7-