H3C SR6602-I AI Series Owner's manual

H3C SR6602-I[IE] AI Series
ICT Converged Gateways
Hardware Information and Specifications
New H3C Technologies Co., Ltd.
http://www.h3c.com
Document version: 5W100-20200923

Copyright © 2020, New H3C Technologies Co., Ltd. and its licensors
All rights reserved
No part of this manual may be reproduced or transmitted in any form or by any means without prior written
consent of New H3C Technologies Co., Ltd.
Trademarks
Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this
document are the property of their respective owners.
Notice
The information in this document is subject to change without notice. All contents in this document, including
statements, information, and recommendations, are believed to be accurate, but they are presented without
warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions
contained herein.
Environmental protection
This product has been designed to comply with the environmental protection requirements. The storage, use,
and disposal of this product must meet the applicable national laws and regulations.

Preface
This document describes hardware information for the H3C SR6602-I[IE] AI series ICT converged
gateways, including views and technical specifications of the chassis and removable components,
LEDs, slot arrangement, and interface numbering.
This preface includes the following topics about the documentation:
•
Audience.
•
Conventions.
•
Documentation feedback.
Audience
This documentation is intended for:
•
Network planners.
•
Field technical support and servicing engineers.
•
Network administrators working with the SR6602-I[IE] AI series ICT converged gateways.
Conventions
The following information describes the conventions used in the documentation.
Command conventions
Convention
Description
Boldface Bold text represents commands and keywords that you enter literally as shown.
Italic Italic text represents arguments that you replace with actual values.
[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
[ x | y | ... ]
Square brackets enclose a set of optional syntax choices separated by vertical bars,
from which you select one or none.
{ x | y | ... } *
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select a minimum of one.
[ x | y | ... ] *
Asterisk marked square brackets enclose optional syntaxchoices separated by vertical
bars, from which you select one choice, multiple choices, or none.
&<1-n> The argument or keyword and argument combination before the ampersand (&) sign
can be entered 1 to n times.
# A line that starts with a pound (#) sign is comments.
GUI conventions
Convention
Description
Boldface Window names, button names, field names, and menu items are in Boldface. For
example, the New User window opens; click OK.
>
Multi-level menus are separated by angle brackets. For example, File > Create >

Convention
Description
Folder.
Symbols
Convention
Description
WARNING!
An alert that calls attention to important information that if not understood or followed
can result in personal injury.
CAUTION:
An alert that calls attention to important information that if not understood or followed
can result in data loss, data corruption, or damage to hardware or software.
IMPORTANT:
An alert that calls attention to essential information.
NOTE:
An alert that contains additional or supplementary information.
TIP:
An alert that provides helpful information.
Network topology icons
Convention
Description
Represents a generic network device, such as a router, switch, or firewall.
Represents a routing-capable device, such as a router or Layer 3 switch.
Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that
supports Layer 2 forwarding and other Layer 2 features.
Represents an access controller, a unified wired-WLAN module, or the access
controller engine on a unified wired-WLAN switch.
Represents an access point.
Represents a wireless terminator unit.
Represents a wireless terminator.
Represents a mesh access point.
Represents omnidirectional signals.
Represents directional signals.
Represents a security product, such as a firewall, UTM, multiservice security
gateway, or load balancing device.
Represents a security module, such as a firewall, load balancing, NetStream, SSL
VPN, IPS, or ACG module.
T
T
T
T

Examples provided in this document
Examples in this document might use devices that differ from your device in hardware model,
configuration, or software version. It is normal that the port numbers, sample output, screenshots,
and other information in the examples differ from what you have on your device.
Documentation feedback
You can e-mail your comments about product documentation to [e-mail].
We appreciate your comments.

i
Contents
1 Chassis views and technical specifications··············································1-1
Chassis views·················································································································································1-1
SR6602-I/SR6602-IE ······························································································································1-1
Power button···········································································································································1-3
Technical specifications··································································································································1-4
SR6602-I/SR6602-IE technical specifications·························································································1-4
Weights, dimensions, and power consumptions·····················································································1-5
Heat dissipation·······································································································································1-7

1-1
1 Chassis views and technical
specifications
SR6602-I AI series is a set of new ICT converged gateways developed by H3C for enterprise
networks and AI scenarios. It uses an open architecture and innovative mechanical and electrical
designs, delivers IT and CT converged solutions, and drives business innovations and rapid delivery.
The fan assembly modules are called "fan trays" in this document.
Chassis views
The figures in this section are for illustration only.
SR6602-I/SR6602-IE
Figure1-1 Front panel
(1) FIP slot
(2) 10GBASE-R SFP+ fiber ports 6 through 19
(3) 10/100/1000BASE-T copper ports 20 through 31
(4) Power button
(5) Drive slots 0 and 1
(6) USB port
(7) 10GBASE-R SFP+ fiber ports 0 through 5
(8) Management Ethernet copper port
(9) Console port

1-2
Figure1-2 Rear panel
(1) Riser module slot
(2) Fan tray slot 1
(3) Fan tray slot 2
(4) Fan tray slot 3 (reserved)
(5) Power supply slot 2
(6) Power supply slot 1

1-3
Figure1-3 System board
(1) BIOS jumper
(2) System battery
(3) Fan tray bay
(4) Riser connector
(5) DDR4 memory slot 4
(6) DDR4 memory slot 3
(7) SATA connector
(8) M.2 drive connector (KEY M)
(9) DDR4 memory slot 1
(10) DDR4 memory slot 2
Power button
WARNING
!
The device might still have power after you press the power button. Do not restart the device or
remove power cords until the power button/LED goes off.
CAUTION:
•Forced power-off might cause data loss in virtual machines. Perform the operation with caution.

1-4
•
For service continuity, avoid touching the power button accidentally or mistakenly
during device
operation.
•
If a virtual machine cannot be shut down gracefully, log in to it, terminate the
running processes,
and then shut down it.
The power button is used to power on or power off the Comware system and virtual machines
created on the Comware system.
To gracefully shut down the Comware system when the device is operating, press and hold the
power button for 0.5 to 4 seconds. To forcibly shut down the Comware system, press and hold the
power button for more than 4 seconds.
By default, pressing the power button on a powered-off device starts the Comware system but not
the virtual machines. You can use the autostart command to configure the virtual machines to be
started together with the Comware system.
Technical specifications
SR6602-I/SR6602-IE technical specifications
Table1-1 SR6602-I/SR6602-IE technical specifications
Item SR6602-I SR6602-IE
Console port 1
Management Ethernet port 1
10/100/1000BASE-T Ethernet
copper port 12
10GBASE-R-SFP+ Ethernet
fiber port 20
USB port 1, USB 3.0 (host mode, type A)
Drive slot 2 (2.5-inch SATA drive)
FIP slot 1
Fan tray slot 3 (FAN3 slot is reserved)
Power supply slot 2
PCIe slot 1, PCIe 3.0 ×16 slot
M.2 drive slot 1 (M key)
Memory capacity 32 GB 32 GB
Memory type and size
Default: 8GB DDR4 RDIMM
(standard)
Maximum: 104 GB (one 8GB and
three 32GB DDR4 RDIMMs)
Default: 32GB DDR4 RDIMM
(standard)
Maximum: 128 GB (four 32GB
DDR4 RDIMMs)
Built-in storage 4 GB 64 GB

1-5
Weights, dimensions, and power consumptions
Chassis
The device uses modular design. Its weight includes the chassis (including mounting brackets and
filler panels) and its internal and external removable components. The total weight varies by the
numbers and types of the removable components.
Table1-2 Chassis weights and dimensions
Device model
Weight (chassis only,
including mounting
brackets and filler
panels)
Weight (fully
configured)
Dimensions (H × W × D)
(excluding rubber feet
and mounting brackets)
SR6602-I/SR660
2-IE 10.7 kg (23.59 lb) 14.1 kg (31.08 lb) 88 × 440 × 480 mm (3.46 × 17.32 × 18.90 in)
Modules
Table1-3 Module weights, dimensions, and power consumptions
Module model Net weight Dimensions (H ×
W × D)
Power
consumption
(min)
Power
consumption
(max)
FIP-30 1.65 kg (3.64 lb) 88 × 192 × 243 mm
(3.46 × 7.56 × 9.57 in) 21.48 W 39 W
MIC-X-XP2 0.55 kg (1.21 lb) 20 × 172 × 210 mm
(0.79 × 6.77 × 8.27 in) 0.98 W 3.05 W
MIC-X-XP4 0.55 kg (1.21 lb) 20 × 172 × 210 mm
(0.79 × 6.77 × 8.27 in) 1.22 W 5.73 W
MIC-X-CLP2 0.55 kg (1.21 lb) 20 × 172 × 210 mm
(0.79 × 6.77 × 8.27 in) 10.16 W 11.12 W
MIC-X-CLP4 0.55 kg (1.21 lb) 20 × 172 × 210 mm
(0.79 × 6.77 × 8.27 in) 10.04 W 11.51 W
MIC-X-SP4 0.55 kg (1.21 lb) 20 × 172 × 210 mm
(0.79 × 6.77 × 8.27 in) 10.65 W 12.24 W
MIC-X-SP8 0.55 kg (1.21 lb) 20 × 172 × 210 mm
(0.79 × 6.77 × 8.27 in) 11.26 W 14.57 W
MIC-X-ET16 0.55 kg (1.21 lb) 20 × 172 × 210 mm
(0.79 × 6.77 × 8.27 in) 8.70 W 9.05 W
NOTE:
Module dimensions are expressed
in the Height (H) × Width (W) × Depth (D) format:
•
H—Height of the front panel of the module.
•
W—Width of the front panel of the module.
•D—Depth from the front panel of the module to the connector ends.

1-6
Power supplies
Table1-4 Power supply weights and dimensions
Power supply model Net weight Dimensions (H × W × D)
PSR250-12A1 0.6 kg (1.32 lb) 40 × 51 × 221 mm (1.57 × 2.01 × 8.70 in)
PSR450-12A1 0.65 kg (1.43 lb) 40 × 51 × 221 mm (1.57 × 2.01 × 8.70 in)
PSR450-12D 0.68 kg (1.50 lb) 40 × 51 × 221 mm (1.57 × 2.01 × 8.70 in)
PSR450-12AHD 0.69 kg (1.52 lb) 40 × 51 × 221 mm (1.57 × 2.01 × 8.70 in)
Fan trays
Table1-5 Fan tray weights and dimensions
Fan tray model Net weight Dimensions (H × W × D) (Lying
flat on a workbench) Power consumption
FAN-80-1 0.4 kg (0.88 lb) 81 × 84 × 80 mm (3.19 × 3.31 × 3.15 in) 30 W
SATA drives
Table1-6 SATA drive weights, dimensions, and power consumptions
SATA drive model Net weight Form factor Max power
consumption
HDD-500G-SATA-3G-5.4K-SFF 0.075 kg (0.17 lb) SFF (2.5 inch) 1.8 W
HDD-2T-SATA-6G-5.4K-SFF 0.125 kg (0.28 lb) SFF (2.5 inch) 3 W
NS-HDD-1T-SATA-SFF 0.14 kg (0.31 lb) SFF (2.5 inch) 5 W
Internal removable components
The GPU and storage controller (also called RAID controller) consume power and the riser module
almost does not consume any power.
Table1-7 Riser module weights and dimensions
Riser module model Net weight Dimensions (H × W × D)
RT-RISER-FHFL-X16 0.65 kg (1.43 lb) 75.4 × 150.4 × 354.3 mm (2.97 × 5.92 × 13.95 in)
Table1-8 GPU weights, dimensions, and power consumptions
GPU model Net weight Form factor Max power
consumption
UN-GPU-P40-X 1.65 kg (3.64 lb) FH3/4FL 250 W
Table1-9 Storage controller weights, dimensions, and power consumptions
Model Net weight Form factor Max power
consumption
UN-HBA-H460-B1 0.1 kg (0.22 lb) LP 17 W

1-7
Table1-10 Memory weights and power consumptions
Memory model Net weight Max power consumption
DDR4-2666-32G-2Rx4-R 0.02 kg (0.04 lb) 2.5 W
Table1-11 M.2 SSD drive weights, dimensions, and power consumptions
M.2 SSD drive model Net weight Form factor Max power
consumption
SSD-480G-SATA-M.2 0.015 kg (0.03 lb) SFF (2.5 inch) 3 W
System power consumption
The system power consumption is the total power consumption of all external and internal removable
components. It varies depending on the types and numbers of the removable components.
For example, if the device is installed with one FIP-30, two MIC-X-XP4 interface modules, one
RISER-FHFL-X16 riser module, one HBA-H460-B1 module, two NS-HDD-1T-SATA-SFF drives, and
two FAN-80-1 fan trays, the system power consumption is 1 × 39 + 2 × 5.73 + 1 × 0 + 1 × 17 + 2 × 5
+ 2 × 30 = 137.46 W.
Heat dissipation
Heat dissipation is measured in BTU/h. 1 W equals 3.4121 BTU/h.
The heat dissipation of a router depends on its power consumption. To calculate heat dissipation of
the device, assume 90% power consumption is converted to heat, and the power supply efficiency is
90%. Heat dissipation of the router per hour is 0.9 × (total power consumption of the internal and
external removable components)/0.9 × 3.4121.

i
Contents
2 Removable component views and technical specifications······················2-1
Removable component views·························································································································2-1
FIP modules············································································································································2-1
AC power supplies··································································································································2-2
DC power supplies··································································································································2-3
High voltage DC supplies························································································································2-3
Fan trays·················································································································································2-4
Riser modules·········································································································································2-4
Storage controllers··································································································································2-5
GPUs·······················································································································································2-5
DIMMs·····················································································································································2-6
M.2 SSD drives·······································································································································2-6
Technical specifications··································································································································2-7
FIP modules············································································································································2-7
MIC-X interface modules·························································································································2-7
Power supplies········································································································································2-7
Fan trays·················································································································································2-8
SATA drives············································································································································2-8
Riser modules·········································································································································2-9
Storage controllers··································································································································2-9
GPUs·······················································································································································2-9
DIMMs···················································································································································2-10
M.2 SSD drives·····································································································································2-10

2-1
2 Removable component views and
technical specifications
Removable component views
FIP modules
Figure2-1 FIP-30 front panel
(1) MIC-X interface module slot 1
(2) MIC-X interface module slot 2
(3) Latch
(4) Ejector lever
(5) Remove button/LED
(6) 1000BASE-X-SFP Ethernet fiber ports 4 through 19
(7) 10GBASE-R-SFP+ Ethernet fiber ports 0 through 3

2-2
AC power supplies
PSR250-12A1
Figure2-2 PSR250-12A1 front panel
(1) Latch
(2) Power supply status LED
(3) Handle
(4) Power receptacle
PSR450-12A1
Figure2-3 PSR450-12A1 front panel
(1) Latch
(2) Power supply status LED
(3) Handle
(4) Power receptacle

2-3
DC power supplies
Figure2-4 PSR450-12D front panel
(1) Latch
(2) Power supply status LED
(3) Handle
(4) Power receptacle
High voltage DC supplies
Figure2-5 PSR450-12AHD front panel
(1) Latch
(2) Power supply status LED
(3) Handle
(4) Power receptacle

2-4
Fan trays
Figure2-6 FAN-80-1 front panel
(1) Fan tray release button
(2) Fan tray status LED
Riser modules
Figure2-7 Riser module view
(1) PCIe slot (for a storage controller or GPU)
(2) GPU power connector
(3) GPU support bracket and screw
(4) Cable tie (for GPU power cables)

2-5
NOTE:
The GPU support bracket and four screws are shipped with the
riser module. Three are used for
installing the GPU support bracket and one is used for securing the storage controller or GPU to the
riser module.
Storage controllers
Figure2-8 Storage controller view
(1) Storage controller golden plating
(2) Storage controller cable connector
(3) Storage controller cable
NOTE:
No storage controller cable is provided with the storage controller. Purchase one as required.
GPUs
Figure2-9 GPU view
(1) GPU power connector
(2) Screw hole in the GPU support bracket
(3) GPU golden plating

2-6
(4) GPU power cable
DIMMs
Figure2-10 DIMM view
(1) Notch of DIMM golden plating
M.2 SSD drives
Figure2-11 M.2 SSD drive view
(1) Screw location of the M.2 SSD drive
(2) Golden plating of the M.2 SSD drive
(3) Screw for the M.2 SSD drive (shipped with the document bag for the chassis)