H3C VG Series Instruction sheet

H3C VG Series Voice Gateways
Web-based Configuration Manual
Hangzhou Huawei-3Com Technology Co., Ltd.
http://www.huawei-3com.com
Manual Version: T2-08014H-20060707-C-1.01

Copyright © 2006, Hangzhou Huawei-3Com Technology Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of Hangzhou Huawei-3Com Technology Co., Ltd.
Trademarks
H3C, Aolynk, , IRF, H3Care, , Neocean, , TOP G, SecEngine,
SecPath, COMWARE, VVG, V2G, VnG, PSPT, NetPilot, and XGbus are trademarks of
Hangzhou Huawei-3Com Technology Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their
respective owners.
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.
To obtain the latest information, please access:
http://www.huawei-3com.com
Technical Support
[e-mail]
http://www.huawei-3com.com

About This Manual
Related Documentation
In addition to this manual, each H3C VG Series Voice Gateways documentation set
includes the following:
Manual Description
H3C VG Series Voice Gateways
Operation Manual It provides guidelines to user operations on the H3C VG Series Voice Gateways.
H3C VG Series Voice Gateways
Command Manual
It provides all commands available in the
H3C VG Series Voice Gateways as well as
the command usage and examples.
H3C VG Series Voice Gateways
Installation Manual It describes how to install a VG and provides safety recommendations as well.
Organization
H3C VG Series Voice Gateways Web-based Configuration Manual is organized as
follows:
Chapter Contents
1 Introduction to VG Briefly introduces the usage and
features of the VG series voice
gateways.
2 Getting Started with Configuration Introduces the connection, login and
configuration GUIs of voice gateways.
3 Web Configuration of VG Describes how to performconfigurations
through the voice gateway Web pages in
detail.
Conventions
The manual uses the following conventions:
I. Command conventions
Convention Description
Boldface The keywords of a command line are in Boldface.

Convention Description
italic Command arguments are in italic.
[ ] Items (keywords or arguments) in square brackets [ ] are
optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by
vertical bars. One is selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets
and separated by vertical bars. One or none is selected.
{ x | y | ... } *
Alternative items are grouped in braces and separated by
vertical bars. A minimum of one or a maximum of all can be
selected.
[ x | y | ... ] *
Optional alternative items are grouped in square brackets
and separated by vertical bars. Many or none can be
selected.
# A line starting with the # sign is comments.
II. GUI conventions
Convention Description
< > Button names are inside angle brackets. For example, click
<OK>.
[ ] Window names, menu items, data table and field names
are inside square brackets. For example, pop up the [New
User] window.
/ Multi-level menus are separated by forward slashes. For
example, [File/Create/Folder].
III. Symbols
Convention Description
Warning Means reader be extremely careful. Improper operation
may cause bodily injury.
Caution Means reader be careful. Improper operation may cause
data loss or damage to equipment.
Note Means a complementary description.

Web-based Configuration Manual
H3C VG Series Voice Gateways Table of Contents
i
Table of Contents
Chapter 1 Introduction to VG.......................................................................................................1-1
Chapter 2 Getting Started with Configuration............................................................................2-1
2.1 Connecting Hardware........................................................................................................2-1
2.2 First Login..........................................................................................................................2-1
2.3 Interface Introduction.........................................................................................................2-2
2.3.1 System Information Page........................................................................................2-2
2.3.2 List Display Page.....................................................................................................2-3
2.3.3 Configuration Item Page .........................................................................................2-4
2.3.4 Directory Tree..........................................................................................................2-7
Chapter 3 Web Configuration of VG............................................................................................ 3-1
3.1 Web Configuration Overview.............................................................................................3-1
3.2 Detailed Web Configuration...............................................................................................3-3
3.2.1 Voice Setup Wizard.................................................................................................3-3
3.2.2 Interface Configuration............................................................................................3-4
3.2.3 Static Route Configuration......................................................................................3-5
3.2.4 POTS Voice Entity Configuration............................................................................3-5
3.2.5 VoIP Voice Entity Configuration..............................................................................3-8
3.2.6 Fax Service Configuration.....................................................................................3-11
3.2.7 Voice Subscriber Line Configuration.....................................................................3-13
3.2.8 Voice GK Client Configuration ..............................................................................3-16
3.2.9 Dial Program Configuration...................................................................................3-17
3.2.10 Voice AAA Configuration..................................................................................... 3-21
3.2.11 Voice Quality Configuration.................................................................................3-23
3.2.12 Global Property Configuration............................................................................. 3-24
3.3 Telnet Login to the VG.....................................................................................................3-25
3.4 User Management........................................................................................................... 3-25
3.4.1 Adding a User........................................................................................................3-25
3.4.2 Login Method Configuration..................................................................................3-26
3.5 Save Configuration.......................................................................................................... 3-27

Web-based Configuration Manual
H3C VG Series Voice Gateways Chapter 1 Introduction to VG
1-1
Chapter 1 Introduction to VG
H3C VG is a voice gateway device (hereinafter referred to as VG). It is developed by
Huawei-3Com Technology Co., Ltd. as a new generation of voice and fax access
equipment for various sectors and SOHO (small office and home office).
The VG is designed to access voice and fax signal, and convert the analog voice and
fax signal to digitalsignal, then packetize the digital signal into IPpackets, and send the
IP packets to the IP network through an Ethernet interface at the network side.
Additionally, some models, such as VG 10-40/10-41, can implement broadband access
of digital service, and provide an Ethernet interface at the user side to connect a PC or
a LAN.
The VG is cost-effective, for it integrates various IP telephone features, such as voice
over IP (VoIP), fax over IP (FoIP), call control, resource management, and
maintenance management, provides multiple coding/decoding modes, and supports
dynamic address acquisition.
The VG is compliant with H.323 of ITU-T and guarantees quality of voice and fax data
transmission over the IP network through high-performance DSP chips,
coding/decoding algorithms with a high compression ratio, echo cancellation, mute
compression, comfortable noise, jitter prevention, and relevant security and QoS
features.
The VG supports fast and non-fast connection to implement outband transmission of
the DTMF (dual tone multifrequency) code and provide busy tone detection,
abbreviated dialing, private lines, outgoing prefix, and some special services of
program-controlled switch (such as do-not-disturb, call forward on busy, alarm call, and
multi-line group access).
At present, the VG provides Ethernet interfaces to connect with LAN and WAN, and
FXS (foreign exchange station) interfaces and FXO (foreign exchange office) interfaces
to connect with ordinary telephone sets or PBX (private branch exchange).
Apart from providing SOHO users with IP telephone and fax services, the VG can
implement simultaneous transmission of voice and data by connecting with LAN
through Ethernet interfaces and thus make better use of the resources.

Web-based Configuration Manual
H3C VG Series Voice Gateways Chapter 2 Getting Started with Configuration
2-1
Chapter 2 Getting Started with Configuration
2.1 Connecting Hardware
For a VG with two Ethernet interfaces:
The default IP address of the WAN interface is 192.168.192.1, with a subnet mask of
255.255.255.0.
The default IP address of the LAN interface is 192.168.193.1, with a subnet mask of
255.255.255.0.
For a VG with only one Ethernet interface:
The default IP address of the ETH interface is 192.168.192.1, with a subnet mask of
255.255.255.0.
Connect the Ethernet interface WAN or ETH with a PC through a network, and
configure the IP address of the PC on the same network segment as the default IP
address of the VG, and use the ping command to check the connection between the
VG and PC.
Note:
Users can modify the IP address of an Ethernet interface through Web configuration.
Once the IP address is modified, the default IP address will be deleted automatically.
2.2 First Login
Open the explorer (IE5.0 or later recommended) and input the IP address
192.168.192.1 in the address bar. Press <Enter>, and a language selection page will
appear, as shown in Figure 2-1.

Web-based Configuration Manual
H3C VG Series Voice Gateways Chapter 2 Getting Started with Configuration
2-2
Figure 2-1 The language selection interface
Select a language, and click <Enter> to enter the configuration page.
2.3 Interface Introduction
2.3.1 System Information Page
The system information page displays basic system information about the VG.
Figure 2-2 The system information page

Web-based Configuration Manual
H3C VG Series Voice Gateways Chapter 2 Getting Started with Configuration
2-3
2.3.2 List Display Page
Figure 2-3 The list display page
The list display page consists of three parts: navigation bar, data display area and
operation button bar.
I. Navigation bar
The navigation bar is located at the uppermost part of the configuration area and used
to navigate to the data you want to view. Click the drop-down list box at the top left
corner to adjust the number of data displayed on each page. If one page cannot display
all data, you can turn to another page by clicking <<<Previous> or <Next>>> at the top
right corner.
II. Data display area
The data display area is located in the middle of the configuration area and displays the
content of data in a table.
zThe first column of the table is a check box for deletion option. If the check box is
grey, it indicates you cannot delete this entry.
zOn the last column is a property setting button . Press this button to enter the
page for setting the properties of the current data. Auser can both view details of
the data on this page and modify some of properties (refer to the section 2.3.3
“Configuration Item Page”). If this column is not available in the table, it means the
data in the table cannot be modified. If a data entry has no modification button, it
means this data entry cannot be modified.
zThe other columns of the table display the data information.
III. Operation button bar
The operation button bar is located at the bottom of the configuration area. The list
display page supports the following operations:
<Select All>: Selects all the data entries displayed in the current page for thepurpose of
deletion. Once clicked, the button will change automatically to <Cancel All> for

Web-based Configuration Manual
H3C VG Series Voice Gateways Chapter 2 Getting Started with Configuration
2-4
canceling selection of all the entries. When <Cancel All> is clicked, the button will
return to <Select All> automatically.
<Del Select>: Deletes the selected data entry (entries). If no data entry is selected, a
dialogue box will pop up to prompt you to select a data entry.
<Refresh>:Asks the VG for the latest data of the current page.
2.3.3 Configuration Item Page
The third type of page is a property setting page, which displays in a table the
properties you need to set as well as their related information. You can use the input
box or drop-down list box to set the properties. This kind of page is usually used to
create, modify and view property configuration.
Figure 2-4 The configuration item page
A property setting page consists of two parts: property setting table and operation
button bar.
I. Property setting table
A property setting table contains four columns:
The first one indicates the name of the property.