HAMPTON BAY MILLBAY GFS60005C User manual

MILLBAY PERGOLA
THANK YOU
We appreciate the trust and conidence you have placed in Hampton Baythrough the purchase of thispergola. We strive to continuallycreate quality
products designed to enhance your home. Visit us online to see our full lineofproducts availablefor your homeimprovementneeds.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
1-855-HD-HAMPTON
HAMPTONBAY.COM

Table of Contents 2
Safety Information 2
Warranty 2
Pre-assembly 3
Assembly .............. 5
Care and Cleaning
Warranty
Safety Information
!
WARNING:
!
WARNING:
CAUTION
Table of Contents
CAUTION:
!
WARNING:
!
WARNING:
!
WARNING:
pergola fabric may render the ame resistant properties
pergola fabric.
This pergola is made with fabric that meets

Part Description Quantity
Pre-Assembly
NOTE:
NOTE
48+1

Pre-Assembly (continued)
Part Description Quantity Part Description Quantity

ATTACHING THE POST BASE COVERS AND THE POST BASES TO THE POSTS
Assembly

A
ATTACHING THE HOOKS TO THE POSTS AND SCREWING THE KNOBS TO THE HOOKS
Assembly (continued)
Screw the knobs (GG) to the hooks 1 (M1) and the hooks 2 (M2).

ATTACHING THE RIGHT CONNECTOR BAR TO THE LEFT CONNECTOR BAR WITH
THE MAGNET IRON PLATE
Assembly (continued)

ATTACHING THE RIGHT CONNECTOR BAR TO THE LEFT CONNECTOR BAR
Assembly (continued)

ATTACHING THE RIGHT CONNECTOR BARS AND THE LEFT CONNECTOR BARS TO THE POSTS
Assembly (continued)
NOTE
bar (B1) and left connector bar (B2) must face the inside of the posts.

ATTACHING THE STRAIGHT CONNECTOR BARS
Assembly (continued)
Insert the straight connector bar 1 (C1) into the straight connector bar 2 (C2), align the hole and secure with an M6x15 combination
bolt (AA), as shown below.

ATTACHING THE STRAIGHT CONNECTOR BARS TO THE POSTS
Assembly (continued)
NOTE

Assembly (continued)
Place four plastic wheels 2 (N2) to the middle top bar 1 (E1).
PLACING THE PLASTIC WHEELS 2 TO THE MIDDLE TOP BAR 1 AND ATTACHING THE MIDDLE
TOP BAR 1 TO THE MIDDLE TOP BAR 2

ATTACHING THE MIDDLE TOP BARS TO THE CONNECTOR BARS
Assembly (continued)
NOTE

Assembly (continued)
ATTACHING THE SIDE TOP BARS 1 TO THE SIDE TOP BARS 2
Attach the side top bar 1 (D1) to the side top bar 2 (D2) using M6x15 combination bolts (AA), as shown below.

Assembly (continued)
PLACING THE PLASTIC WHEELS 1 AND ATTACHING THE SIDE TOP BARS TO THE
CONNECTOR BARS
NOTE
B2&B1
Place four plastic wheels 1 (N1) each into the side top bar 1 (D1) and the side top bar 2 (D2).

Assembly (continued)
INSERTING THE SIDE TOP BARS

Assembly (continued)
ATTACHING THE SIDE TOP BARS TO THE CONNECTOR BARS
NOTE

Assembly (continued)
INSERTING THE FIXED SHADE RODS INTO THE FABRIC SHADE
NOTE
Unfold the fabric shade (J1), and insert the xed shade rods 1 (G1) into the top slots of the fabric shade (J1), as shown below.

Assembly (continued)
ATTACHING THE FIXED SHADE RODS TO THE CONNECTOR BARS
NOTE
Attach the xed shade rods 1 (G1) to the right connector bar (B1) and the left connector bar (B2), align the hole and
secure with M6x35 combination bolts (CC).

Assembly (continued)
ATTACHING THE ACTIVITY SHADE RODS
NOTE
with M6x18 countersunk bolts (BB).