HAMPTON BAY TURNBERRY A101004500 User manual

Item #1003 545 436
1003 421 784
Model #A101004500
USE AND CARE GUIDE
TURNBERRY 10 FT X 12 FT GAZEBO
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
WWW.HAMPTON.COM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this gazebo. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for
choosing Hampton Bay!

Table of Contents
Table of Contents..........................................................2
Safety Information.........................................................2
Warranty......................................................................... 2
What is Covered .......................................................................2
What is Not Covered ................................................................2
Pre-Assembly ................................................................ 3
Planning Assembly...................................................................3
Hardware Included...................................................................3
Package Contents ....................................................................4
Assembly ....................................................................... 6
Care and Cleaning ...................................................... 23
1. More than two people are required for this assembly.
2. Some parts may contain sharp edges. Wear protective
gloves.
3. When assembling and using this product, basic safety
precautions should always be followed to reduce the risk of
personal injury and damage to equipment. Please read all
instructions before assembly and usage.
WARNING: While this gazebo is manufactured to withstand
winds through only the supplied ground stakes, in areas
subject to frequent severe weather, securing the gazebo to a
deck, concrete patio or footings should be considered.
Snow must be cleared off regularly during snowy days.
Remove the snow at the top when it is thicker than 4 inches.
In order to avoid damage, use a plastic snow rake to remove
excessive snow and ice buildup from roof and keep away
from falling debris.
CAUTION: Do not climb on top of the gazebo. Falling off
the gazebo can result in serious injury, possibly even death.
2YEAR WARRANTY
WHAT IS COVERED
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the
item is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material or
workmanship for a period of 2 years.
WHAT IS NOT COVERED
We do not reimburse for transportation of delivery costs, or compensate the individual or any outside party for assembling or disassembling
the product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit WWW.HAMPTON.COM.
Production Number: 2020200041
Safety Information
WARNING: Keep all flame and heat sources away from
this gazebo fabric. This Gazebo is made with fabric that
meets CPAI-84 specifications for flame resistance. It is not
fire proof. The fabric will burn if left in continuous contact
with any flame source. The application of any foreign
substance to the gazebo fabric may render the
flame-resistant properties ineffective.
NOTICE:
For outdoor use only.
Warranty
DANGER:
This unit is heavy! Do not assemble this
item alone.
2 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Pre-Assembly
PLANNING ASSEMBLY
Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included
and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC
DD
Part
Part Number
Description
Quantity
AA
P90804A07001
M6 X 20 Screw
32
BB
P12410A01001
￠6 X 200 Stake
8
CC
P90701A07007
Plastic Ring
104
DD
P90812A07001
M5 X 15 Screw
16
ADDITIONAL HARDWARE
Part
Part Number
Description
Quantity
AA
P90804A07001
M6 X 20 Screw
2
CC
P90701A07007
Plastic Ring
1
DD
P90812A07001
M5 X 15 Screw
1
3 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Pre-Assembly (continued)
PACKAGE CONTENTS
A1
A2
B1
B2
B3
C2
F1
G
K
M
L
J
C3
C4
C1
E2
F2
D1
H
I
D2
D3
E1
N
O
4 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Pre-Assembly (continued)
Part
Part Number
Description
Quantity
A1
P000200290
Post 1
4
A2
P000200289
Post 2
4
B1
P006300055
Cross panel
8
B2
P000400609
Long cross beam
2
B3
P000400610
Short cross beam
2
C1
P005700259
Long mosquito netting bar 1
4
C2
P005700260
Long mosquito netting bar 2
4
C3
P005700261
Short mosquito netting bar 1
4
C4
P005700262
Short mosquito netting bar 2
4
D1
P000600898
Upper oblique tube
4
D2
P000600899
Middle oblique tube
4
D3
P000600897
Bottom oblique tube
4
E1
P000600900
Upper long middle tube
2
E2
P000600901
Bottom long middle tube
2
F1
P000600902
Upper short middle tube
2
F2
P000600903
Bottom short middle tube
2
G
P000500735
Big roof connector
1
H
P000500734
Small roof connector
1
I
P000600904
Small roof oblique tube
4
J
P005600166
Top Decoration
1
K
P005800113
Hook
1
L
P001100369
Small Canopy
1
M
P001100370
Big Canopy
1
N
P001200125
Mosquito Netting
1
O
P001300061
Private Curtain
1
5 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly
1 Assembling the Cross Panels

Connect 2 sets of Cross Panels (B1) with the long cross beams (B2) using screws (DD).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
B1
B2
DD
B1
6 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly
2 Assembling the Cross Panels

Connect another 2 sets of Cross Panels (B1) with the short cross beam (B3) using screws (DD).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
B1
B3
DD
B1
7 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly
3 Assembling Mosquito Netting Bars

Connect the Long mosquito netting bar 1 (C1) with Long mosquito netting bar 2 (C2). Connect the Short mosquito netting bar 1 (C3) with
Short mosquito netting bar 2 (C4) .
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
C1
C2
C3
C4
8 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly
4 Attaching the Mosquito Netting Bars

Attach the assembled Long Mosquito Bars (C1&C2) to the Cross Beam (B1) using bolts (AA). Attach the Short Mosquito Bar (C3&C4) in the
same way .
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
C1
C3
C2
B2
B1
B1
AA
B3
C4
B1
B1
9 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly
5 Assemble the Post 1 and Post 2

Screw the Post 2 (A2) on Post 1 (A1) using bolts (AA).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
A1
AA
A2
A2
A1
10 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly
6 Attaching the Crossbeams

Attach the Post 1 (A1) to the assembled Cross Beams (B1&B1) using bolts (AA).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
B1
AA
A1
A1
B1
B2
B2
11 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly
7 Attaching the Crossbeams

Attach the Post 1 (A1) to the assembled Cross Beams (B1&B1) using bolts (AA).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
AA
A1
B2
B1
B3
B3
A1
12 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly
8 Assembling the Oblique Tubes

Connect the Upper oblique tube (D1), Middle oblique tube (D2) and Bottom oblique tube (D3) using the spring button on the parts.
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
D3
D2
D1
D1
D2
D2
D3
13 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly
9 Assembling the Middle Tubes

Connect the Bottom long middle tube (E2) and Upper long middle tube (E1) using the spring button on the parts. Connect the Bottom short
middle tube (F2) and Upper short middle tube (F1) using the spring button on the parts.
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
F1
F2
E2
E1
14 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly
10
Attaching the Oblique Tube and Hook

Inset the Upper oblique tubes (D1) to the Big roof connector (G), then Screw the Hook (K) to the Big roof connector (G). Insert the Bottom
oblique tube (D3) to the Post 1 (A1).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
G
D1
K
D3
A1
15 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly
11 Attaching the Middle Tubes

Insert the assembled Long middle tube (E1) to the Big roof connector (G), insert the Bottom long middle tube (E2) to the Short cross beam
(B3).
Insert the assembled Short middle tube (F1) to the Big roof connector (G), insert the Bottom short middle tube (F2) to the Long cross beam
(B2).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
G
F1
E1
F2
B2
F2
F1
E1
E2
B2
B3
16 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly
12 Assembling the Small Roof

Deeply inert the Small roof oblique tube (I) to the Small roof connector (H) to the end (Fig.1), put the small canopy on the small roof and align
the corners (Fig.2). Screw the Top decoration (J) on the roof (Fig.3)，pull the Small roof oblique tube (I) back to fit the holl.
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
I
H
Fig:1
Fig:3
Fig:2
Fig:4
J
L
H
I
17 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly
13 Attaching the Small Roof

Put the big canopy (M) on the assembled big roof (D1), connect the assembled small roof (I) with the big roof (D1) using the spring button on
the parts before spread the big canopy (M).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
I
D1
M
M
18 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly
14 Spreading the Big Canopy

Spread the Big canopy (M), and first aligning the 4 corners to the Oblique Tubes (D3). Then aligning the big canopy to the middle tube
(E1&E2).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
D3
M
M
E2
19 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Assembly
15
Attaching the Curtain and Netting

Hang the Private Curtain (O) and the Mosquito Netting (N) on the Mosquito Netting Bar (C1, C2, C3, C4) using Plastic Ring (CC).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
N
O
CC
O
N
20 WWW.HAMPTON.COM
Please contact 1-855-HD-HAMPTON for further assistance.