haupa SDE240-6 User manual

Battery powered crimping tool INSTRUCTION MANUAL
Battery powered crimping tool
„SDE240-6“
... convincing solutions
Art. 216669-1

SPECIFICATION
Art. 216669-1
OUTPUT 6t
VOLTAGE 18 V DC
WEIGHT 2,9 KGS (without battery)
DIMENSION 420 x 76 x 122 mm (LxWxH)
ACCESSORY battery & charger & case & manual
APPLICATION copper & aluminium
terminal & conduct crimping
CRIMPING RANGE
DIN AWG/MCM
copper 10-240mm² 8-500
aluminium 50-240mm² 1-500

english
REMARKS BEFORE OPERATION OR WHILE OPERATING:
• Please wear protective equipment while operating to make sure your safety. Warning: This
tool is not insulated.
• If the release button is not returned, please try to reduce the pressure of safety valve till
leaking out the pressure.
• Please kindly check the crimping range and suitable crimping material. Please make sure
that your crimping material is suitable for this tool and your crimping material is in the
range of 216669. (You could find the range at this manual on page 1). Do not crimp
without any material in crimping area, otherwise the tool will be damaged.
• Please do not put your hands/fingers in the working area while operating, cleaning
and testing. This action is very dangerous.
• Please do not aim at anyone while operating. This action is very dangerous.
Die
Release
button
Battery lock
Switch
Working light
18 V battery
Working area
Rotation head
180°
Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D-42853 Remscheid.
Phone: [phone], Fax: [phone], [e-mail] • Errors and technical changes reserved.
... convincing solutions

HAUPA GmbH & Co. KG, Königstraße 165-169, D-42853 Remscheid,
Tel.: [phone]. Fax: [phone], E-Mail: [e-mail]. Subject to technical changes and printing errors.
... convincing solutions
english
Mounting and unmounting the battery
Charger specifications
Model Nr.: 215527
Input: 100 – 240 V AC
Frequency: 50 / 60 Hz
Output V: 21 V
Output A: 1 A
Weight: 0,164 kg
Measurements: 92 mm (L) x 47 mm (B) x 45 mm (H)
Charger: Connecting battery to charger:

215523 (2 Ah) 215525 (4 Ah)
Please remove the battery after use and keep it removed when storing the
tool!
HAUPA is not liable for wrong or unintended use
2 Ah Battery Specifications
Model Nr.: 215523
Voltage: 18 V
Weight: 0,35 kg
Measurements: 114 mm (L) x 73,5 mm (B) x 67 mm (H)
est. Charging Time: approx. 30 Min
Capacity: 2 Ah
4 Ah Battery Specifications
Model Nr.: 215525
Voltage: 18 V
Weight: 0,58 kg
Measurements: 114 mm (L) x 73,5 mm (B) x 67 mm (H)
est. Charging Time: approx. 60 Min
Capacity: 4 Ah
LED charge indicator: (Pressing the button will light up LEDs)

english
HOW TO USE 216669-1:
CRIMPING STEPS
•Insert the battery to 216669-1 as below picture 1: While the battery is inserted
the battery lock will lock the battery.
• After setting suitable crimping material, then you could use the start switch and the oil
return switch to operate the tool. The tool will move forward and backward to crimp.
Picture 2: Operation
Picture 1: Set/Take batttery

english
STORAGE:
•♦ The hydraulic oil for 216669-1:
Add/use hydraulic oil SHEEL TELLUS T-15 or SEA#20. Do not use other brand. Otherwise the
tool will be damaged. We also can supply you hydraulic oil. Welcome to inquire for Factory
Brand Oil T-15.
•♦ Put the tool, charger and battery in a dry dean place. Please charge the battery full once
two months to make sure the life time. Clean the tool and add some antirust oil on the metal
parts, i.e. dies, dies holders before storage.
BREAKDOWN SOLVING:
•♦The crimper can not operate to the original position and while operating, the speed is very
slow: Please contact your distributor.
Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D-42853 Remscheid.
Phone: [phone], Fax: [phone], [e-mail] • Errors and technical changes reserved.
... convincing solutions

HAUPA GmbH & Co. KG, Königstr. 165-169, 42853 Remscheid, Germany
Declaration of conformity
HAUPA Factory certificate
Remscheid, 29.01.2020
Product: Battery powered crimping tool„SDE240-6“
Product range: Around the cable
Art.-no.: 216669-1
Crimping form: Mandrell
Crimping Range: Standard cable lugs & connectors: 10-240 mm²
Cable lug according to DIN 46234 not manufacturer bound
Pressing force: 60 kN
Battery: 18 V, 2 Ah Li-Ion
Weight (Set): 7,9 kg
We, HAUPA GmbH & Co.KG,headquartered in 42853 Remscheid/Germany, Koenigstr.165-169,
declare under our sole responsibility that the products mentioned in the data sheet compyl with the
European Standards or Standard Documentations according to the regulations of the following mentioned
directives:
EN 62841-1, EN 12100 Part 1 + 2, EN ISO 13857 , EN 349, EN 60204-
1, EN 20643, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 4413, EN
1037
According to 2006/42/EG, 2014/30/EU
HAUPA GmbH & Co. KG
Product Management

HAUPA GmbH & Co. KG
Königstraße 165 – 169
D-42853 Remscheid