Havis-Shields C-TCB-1 User manual

C-TCB-1_INST_9-07
INSTALL INSTRUCTIONS C-TCB-1
TELESCOPING COMPUTER BASE
1992-1997 CHEVROLET CAPRICE, 1997-2002 LUMINA &
1995-2008 FORD CROWN VIC
TOOLS REQUIRED:
Ratcheting Wrench
Standard & Metric Socket Set
Power Drill
Drill Bit Set
HARDWARE:
QTY DESCRIPTION PART #
2 ¼” x 3/4” Self tapping screw GSM33060-1
1 5/16-18 Nylock Nut GSM30017
1 5/16-18 x 1” Hex head bolt GSM33012
2 5/16” Flat Washers GSM31006
SUB ASSEMBLY:
1. Confirm receipt of all parts.
2. Loosen front and rear passenger seat bolts.
INSTALLATION:
1. Slide base of the pole support
assembly under the front inboard (closest to the transmission hump) seat base. Slide the side
brace arm under the front outboard (closest to the door) seat base.
2. Attach side and forward brace arms to pole support assembly with 5/16” x 1” screw. (Do not
tighten yet). Align the holes of the seat base, the pole support assembly, side brace arm and
floor holes. Firmly tighten all four seat bolts without over tightening.
3. Using two ¼” x ¾” self tapping screws, drill holes and attach lateral (forward) brace arm to
vehicle floor or transmission hump.
4. Tighten the hex head screw that attaches the brace arms to the telescoping post when
finished.
Telescoping
Pole
Side Brace Arm
Assembly
will be under
p
assen
g
er’s le
g
s.
Pole Support
Assembl
y
Lateral (forward)
Brace Arm Assembly
Slide under front
passenger inboard
seat bolt Slide under front
passenger outboard
seat bolt
Ti
g
h
t
en las
t