Heatilator NDV3630I-B User manual

1
Heatilator • NDV/NBV Upgrade Kit • 2382-955 • 1/16
NDV/NBV Upgrade Kit
DVBV4842-B-KIT, DVBV4236-B-KIT, DVBV3933-B-KIT, DVBV3630-B-KIT
Models: NDV3630I-B, NDV3630IL-B, NDV3933I-B, NDV3933IL-B,
NDV4236I-B, NDV4236IL-B, NDV4842I-B, NDV4842IL-B
NBV3630I-B, NBV3933I-B, NBV4236I-B, NBV4842I-B
KIT CONTENTS:
Figure 1. Kit Contents
B
B
A. Embers
B. Flue Visor
C. Hearth Pan
D. False Back
E. Pilot Shield
F. Logs
A
A
C
C
D
D
E
E
F
F
CAUTION! Risk of Cuts, Abrasions or Flying Debris.
Wear protective gloves and safety glasses during instal-
lation. Sheet metal edges are sharp.
DANGER
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
A barrier designed to reduce the risk of
burns from the hot viewing glass is provided
with this appliance and shall be installed for
the protection of children and other at-risk
individuals.

2Heatilator • NDV/NBV Upgrade Kit • 2382-955 • 1/16
See Table 1 for corresponding log set and individual logs for each size Novus model.
SIZE 3630 3933 4236 4842
ASSEMBLY SRV2380-070 SRV2381-070 SRV2382-070 SRV2383-070
LOG 1 SRV2380-071 SRV2380-071 SRV2382-071 SRV2383-071
LOG 2 SRV2380-072 SRV2381-072 SRV2381-072 SRV2383-072
LOG 3 SRV2380-073 SRV2381-073 SRV2381-073 SRV2383-073
LOG 4 SRV2380-074 SRV2380-074 SRV2382-074 SRV2382-074
LOG 5 SRV2380-075 SRV2380-075 SRV2380-075 SRV2383-075
Table 1.
5. Install the logs on the hearth pan as shown on the next page.
4. Remove the false back. See Figure 5.
Figure 5.
3. Remove the flue visor. See Figure 4.
Figure 4.
1. Remove the hearth pan and log set. See Figure 2.
2. Remove the pilot shield. See Figure 3.
Figure 2.
Figure 3.

3
Heatilator • NDV/NBV Upgrade Kit • 2382-955 • 1/16
Figure 9. Log #4 in Position
1
1
Figure 8. Locations of Flat Spots for Log #4
2
2
Figure 7. Log Set Shown Assembled
1
1
2
2
3
3
CAUTION: Logs are fragile, handle with care.
FLAT SPOTS FOR LOG #4
FLAT SPOTS FOR LOG #4
LOG #4: Place Log #4 into position by setting the left end of Log #4 into the flat spot on Log #2 and then resting the right
end, or nose, of Log #4 on the flat spot on Log #1. Figure 8 shows locations of flat spots. Figure 9 shows Log #4 installed.
4
4
See Figure 6 for locations of fasteners for each log.
Figure 6. Log Fastener Locations on Base Pan
FASTENERS-LOG #1
FASTENERS-LOG #1
FASTENERS-LOG #2
FASTENERS-LOG #2
FASTENERS-LOG #3
FASTENERS-LOG #3
Log #5: Place Log #5 into position. The forked end of Log #5 is positioned toward the front of the appliance, with the two
slots on the back side resting on the bent lip of the hearth pan. See Figure 11. Slide Log #5 toward the right until it contacts
the log pin as shown in Figure 11.
LOG PIN
LOG PIN
Figure 10. Log Pin Location Figure 11. Log #5 in Position
BENT LIP
BENT LIP

4Heatilator • NDV/NBV Upgrade Kit • 2382-955 • 1/16
6. Assemble new false back. See Figure 13.
Heatilator, a brand of Hearth & Home Technologies
7571 215th Street West, Lakeville, MN 55044
www.heatilator.com
10. Add embers and lava rock following the instructions
in the appliance installation manual.
11. Install the two top logs as shown in the log instruci-
tions on previous pages.
Figure 13.
7. Install new flue visor. See Figure 14.
Figure 14.
9. Install hearth pan and assembly. Place into appliance.
See Figure 16.
Figure 16.
Figure 15.
8. Install pilot shield. Pilot shield should be installed on
top of pilot assembly. See Figure 15.
4
4
5
5
1
1
2
2
3
3
Figure 12. Log Set Installed
BEND BOTH LEGS OF FLUE VISOR
BEND BOTH LEGS OF FLUE VISOR
TOWARD THE BACK OF THE FIREBOX
TOWARD THE BACK OF THE FIREBOX