HEATSTRIP THE1800 User manual

13
Standard mounting brackets
The HEATSTRIP Elegance comes with a pair of standard mounting brackets. These adjustable brackets allow direct
ceiling, wall or pole/beam mounting, and come with preset angle options of parallel, 22.5° and 45°.
PART No PACKAGED
DIMENSIONS (mm)
WEIGHT (kg) MATERIALS
ZBRAK-110 125 x 150 x 40 0.2 ALLOY
X
CEILING
WALL
MODEL “X”
MINIMUM DISTANCE (mm)
THE1800 570
THE2400 700
THE3600 1000

14
SUITABLE FOR
MODEL PART No HOLE CUTOUT
DIMENSIONS (mm)
OVERALL
DIMENSIONS (mm)
WEIGHT
(kg)
THE 1800 THEAC-040 1030 x 240 1080 x 290 x 125 6
THE 2400 THEAC-041 1260 x 240 1310 x 290 x 125 8
THE 3600 THEAC-042 1860 x 240 1910 x 290 x 125 9
Flush mount enclosure
The Flush Mount Enclosure is an ideal way to neatly install the HEATSTRIP into a ceiling. They are available for all
HEATSTRIP Elegance models, and are supplied as a one-piece unit suitable for mounting individual heaters. Flush
mounting can be used with plaster or timber lined ceiling materials.
An ideal mounting height is 2.3m-2.5m, with a maximum ceiling height of 2.7m in an outdoor enclosed environment.
Maximum mounting heights should be strictly followed, otherwise the performance of the units may be reduced.
A minimum clearance of 50mm behind the enclosure must be provided.
The enclosure is manufactured from powder coated steel.
Please refer to the Flush Mount Enclosure Installation Manual for more detailed installation information.

15
Extension Mount Bracket
PART No PACKAGED
DIMENSIONS (mm)
WEIGHT
(kg)
MATERIALS NOTES
THEAC-044 0.21 6060 AL Kit includes 2x300mm extension pole, screws
and bracket adaptors
THEAC-044 0.38 6060 AL Kit includes 2x600mm extension pole, screws
and bracket adaptors
THEAC-045 0.55 6060 AL Kit includes 2x900mm extension pole, screws
and bracket adaptors
THEAC-046 0.71 6060 AL Kit includes 2x1200mm extension pole, screws
and bracket adaptors
The Extension Mount bracket allows HEATSTRIP Elegance units to be lowered from high ceilings using rigid connections.
The standard length options as part of the kit are 300mm, 600mm, 900mm and 1200mm.
The kits include all brackets, poles and screws necessary for connection to the heaters, however it does not include
screws for attachment to the ceiling.
The extension mount bracket utilises component from the standard bracket kit which is supplied with each heater.
For minimum distance requirements between poles please refer to page 14.
*screws to ceiling are not included.