HEATSTRIP THX2400UK Instruction Manual

R A D I A N T O U T D O O R H E A T E R S
OPERATION, INSTALLATION AND MAINTENANCE MANUAL
HEATSTRIP® Max – EUROPE
The heater that is a design f e a ture!

R A D I A N T O U T D O O R H E A T E R S
2
Product Overview Rev C NOV13
hy choose Heatstrip
®
electric radiant heaters for your outdoor or hard-to-heat indoor area?
As there is typically constant air movement in an outdoor or open indoor area, many conventional patio heaters rely on
convection heating which works y heating the surrounding air. This can e quite impractical for these areas, as this
heated air can easily low away with natural air movement. Radiant style heaters transfer heat directly to o jects through
infra-red waves.
Whilst convection heaters heat the air in etween o jects, radiant heaters heat the surface of the o jects themselves.
HEATSTRIP
®
electric radiant heaters are more effective within an outdoor or uninsulated indoor area ecause they
provide targeted warmth directly to the people and o jects in their path.
Discrete, stylish heating for undercover outdoor and indoor open areas
Using the radiant heating principle, HEATSTRIP
®
can provide effective and energy efficient comfort heating for undercover
outdoor and indoor open areas. HEATSTRIP
®
has successfully ena led many entertainment venues such as restaurants,
pu s and clu s to utilise their outdoor dining areas day and night, through all seasons. Within your workplace or usiness,
HEATSTRIP
®
can provide comfort heating for designated outdoor smoking and leisure areas, as well as for workstation
spot heating in factories, warehouses and showrooms. Within your home, HEATSTRIP
®
can provide comfort heating for
undercover alfresco dining and BBQ area, patios, verandas, courtyards and alconies.
APPLICATION THS THD THX
Indoor insulated areas, classrooms, offices, bathrooms, wet areas, drying rooms √ √ X
Outdoor under cover, café, veranda, patio, balcony ceiling height 3m or less X √ X
Outdoor under cover, café, veranda, patio, balcony ceiling height 3m or more X X √
Highly exposed outdoor area X X √
Indoor open area, warehouse, factory, production areas, sports facilities √ √ √
Indoor spot heating, above tables, assembly areas X √ √
There are 3 different series of products within the Heatstrip
®
product category. Each has a different temperature output,
making them ideal for different applications. Below is a list of some common applications, to assist with the selection of the
most effective and efficient series. This is a general guide only, please refer to the Product Manual for each product, for
more information.
HEATSTRIP
®
Design (THD models) is a premium high temperature heater and is primarily used for outdoor rooms where
there is 1,2 3, or 4 enclosed sides, with an ideal mounting height of 2.1 m to 2.7m.
HEATSTRIP
®
Max (THX models) is an ultra high temperature heater used for uncovered or open areas with a mounting
height of 2.4 m to 3.5m.
HEATSTRIP
®
Indoor (THS models) is a medium intensity heater used for protected indoor applications.

R A D I A N T O U T D O O R H E A T E R S
3
Efficient, cost effective electric heating
The innovative design of the HEATSTRIP
®
ena les comforta le and even heat dispersion from the surface with minimal
operating costs.
Design flexibility
Two HEATSTRIP
®
Max models are availa le, ensuring the heating requirements of any outdoor or open
indoor area is possi le. Brackets for direct ceiling or wall/ceiling angled mounting are supplied as standard.
Optional HEATSTRIP
®
accessories include extension mount rackets, twin mount rackets and end to end mounting
rackets.
Minimal maintenance
The HEATSTRIP
®
incorporates no internal moving parts ensuring quiet and virtually maintenance free operation.
Australian made
Designed, engineered and assem led in Australia
Easy to use
The standard HEATSTRIP
®
is controlled y a simple on/off operation, either when plugged directly into a power point, or
hard-wired via a wall mounted on/off switch. The unit takes approximately 5 minutes to heat up to maximum temperature
and approximately 30 minutes to cool down, depending upon the am ient temperature. Please don’t forget to turn it off.

R A D I A N T O U T D O O R H E A T E R S
4
Specifications
MODEL PO ER
( ATTS)
CURRENT
(AMPS)
DIMENSIONS
(mm)
EIGHT
(Kg)
LEAD
LENGTH
(mm)
PLUG
THX2400UK 2400 @ 240 v 10 854 x 170 x 80 5 1000 YES
THX3600UK 3600 @ 240 v 15 1184 x 170 x 80 6 1000 NO
THX2400EU 2400 @ 230 v 10 854 x 170 x 80 5 1000 YES
THX3600EU 3600 @ 230 v 15 1184 x 170 x 80 6 1000 NO
MODEL
HEATER TYPE High intensity electric radiant overhead heater with Incoloy 840 element
OUTPUT Refer to model code chart a ove
POWER 230-240 Volts Nominal at 50—60 Hertz, Single Phase
CONNECTION 3 Core Ca le 2.5mm
2
APPROVALS AUSTRALIA/CE
MOUNTING HEIGHT MINIMUM
RECOMMENDED
MAXIMUM
2.1 m
2.4 m to 3.5 m
3.5 m (For higher ceiling heights, units can e
lowered using optional racket kits or refer to the
Heatstrip Max range)
PROTECTION RATING IPX5 Protection from water ingress from all directions
COUNTRY OF MANUFACTURE Australia
MOUNTING OPTIONS Suita le for ceiling, wall, eam mounting. Also availa le for extension
mount using rigid fixing poles and chain mount racket.
854
1180
170
170
80
80

R A D I A N T O U T D O O R H E A T E R S
5
BAR
BAR STOOLS
DINING TABLE
LOUNGE
BBQ
Spot heating principle
In most outdoor or difficult-to-heat indoor applications, therefore are 2 options when looking at the size and quan-
tity of the heater required. Option 1 is to comfort heat the entire area ased on the total dimensions of the space,
regarding of whether the entire area is eing fully occupied. Option 2 is to spot heat the high use areas, such as
over outdoor ta les, BBQ’s, lounges, assem ly lines or indoor workstation.
Often it is more practical and efficient to spot heat these areas. Spot heating will help to reduce the initial capital
cost, as well as the running costs. Spot heating will allow the area to e “zoned”, meaning heating only the areas
that are eing used, such as ta les in a restaurant or outdoor alfresco area.
The top ta le shows how HEATSTRIP
®
Max can e used over a ta le.
The ottom ta le shows the flexi ility of using HEATSTRIP
®
to provide a comforta le environment, even when
the layout of the area is very unusual.
THX2400 THX3600

R A D I A N T O U T D O O R H E A T E R S
6
Radiant footprint
HEATSTRIP
®
electric heater produce radiant heat, which heats o jects rather than the air. Therefore, it is imperative that
o jects to e heated (ie. People), are within the direct radiant footprint of the heater.
The diagram elow shows the radiant footprint of HEATSTRIP
®
Max, and is an approximate guide ased on a fully
enclosed, outdoor environment.
This diagram shows that the maximum heat output is found directly under the heater, and the temperature decreases as
you move away from the heater.
It highlights the importance of maintaining recommended mounting heights, and positioning the heater directly a ove the
area to e heated, if possi le.
Also, the temperature (ie. surface temperature) is the same for oth models, regardless of the wattage. However, the size
increases and the length of the unit increases, the radiant footprint will e larger.
800mm STANDING HEIGHT
1170mm SITTING HEIGHT
2400
1500
25°C 21°C
66°
23°C
2600
3800
4400
THX RADIANT CROSS SECTIONAL AREA
3000
3500mm MAXIMUM HEIGHT

R A D I A N T O U T D O O R H E A T E R S
7
Selection guide
Prior to selecting the exact model and quantity required for your application, please ensure the correct range of Heatstrip
heaters is eing used.
Below is an overview of the Heatstrip options.
HEATSTRIP
®
Design (THD models) is a premium high temperature heater and is primarily used for outdoor rooms where
there is 1,2 3 or 4 enclosed sides, with an ideal mounting height of 2.1 m to 2.7m. Ideal for hard to heat indoor applica-
tions or moist environments where an IP55 rating is required.
HEATSTRIP
®
Max (THX models) is an ultra high temperature heater used for uncovered or open areas with a mounting
height of 2.4 m to 3.5m. Also suita le for difficult indoor environments such as showrooms, production lines, warehouses
etc.
HEATSTRIP
®
Indoor (THS models) is a medium intensity heater used for protected indoor applications, such as sun-
rooms, school classrooms, halls, gymnasiums etc.
General recommendations for HEATSTRIP
®
Max:
• Ideal mounting height: 2.4m to 3.5m. Maximum is 3.5m in a protected outdoor environment.
• Ideal mounting location: ceiling mounted, directly a ove area to e heated (eg. a ove a ta le)
• Based on the radiant footprint of the previous page, for a protected outdoor area, a minimum of 250W/m2 is re-
quired. For indoor spot heating, a minimum heating capacity of 150W/m2 is recommended.
The elow ta le outlines the coverage of each HEATSTRIP
®
Max model (in m2), ased on 3 different scenarios. For
example, for an outdoor area that is protected from prevailing winds y walls, café linds etc, Model THX2400 will cover
9.5m2 and Model THx3600 will cover 14.5m2.
MODEL INDOOR PROTECTED (m2) OUTDOOR ENCLOSED (m2) OUTDOOR EXPOSED (m2)
THX2400 16 9.5 6
THX3600 24 14.5 9

R A D I A N T O U T D O O R H E A T E R S
8
CEILING
Installation Requirements
The ideal mounting position for the HEATSTRIP
®.
Max is on the ceiling, directly a ove the area to e heated. If this is not
possi le, HEATSTRIP
®.
Max can e mounted on a wall and angled downwards. In this situation, ensure the mounting
height is in the range of 2.4m to 3.0m and the ta le is within 3.0m of the wall.
For mounting heights more than 3.5m, we recommend the use of the optional accessories to reduce the height of the
heater to 2.4m—3.5 m. This will increase the effectiveness of your HEATSTRIP
®.
Refer to the Mounting Accessory section
for more information.
Electrical connections/GPO’s should not e located at the ack of the heater. They should e located outside the physical
footprint of the units to minimize heat uild-up ehind the units.
Incorrect Installation Correct Installation
The heating surface must never e directed toward the ceiling
CEILING
CEILING
CEILING

R A D I A N T O U T D O O R H E A T E R S
9
LIGHT OR SPRINKLER MUST
NOT BE BELOW THE HEATER
CEILING
FLOOR
SURFACE BELOW HEATER
150mm MIN.
300mm MIN.
1000mm MIN.
150mm MIN.
2100mm MIN.
LIGHT OR SPRINKLER MUST
NOT BE BELOW THE HEATER
CEILING
FLOOR
SURFACE BELOW HEATER
300mm MIN.
150mm MIN.
150mm MIN.
2100mm MIN.
1000mm MIN.
Angled Ceiling Installation
Ceiling Installation
150mm MIN.
150mm MIN.
300mm MIN.
LIGHT OR SPRINKLER MUST
NOT BE BELOW THE HEATER
CEILING
FLOOR
SURFACE BELOW HEATER
1000mm MIN.
2100mm MIN.
Installation location —the elow diagrams confirm the minimum recommended clearances.
Angled all Installation

R A D I A N T O U T D O O R H E A T E R S
10
Mounting options
The installation of HEATSTRIP
®
Max is simple and easy with the standard mounting rackets supplied. For other more
challenging locations there are a range of mounting options availa le - refer to elow diagrams.
The HEATSTRIP
®
Max can e mounted directly to the ceiling, angled downwards on a wall, suspended on chains or
poles; attached to eams or poles; or 2 units together. Refer to the following pages for more detailed information on each
mounting option.
TWIN MOUNT
BRACKET
STANDARD
BRACKET
EXTENSION MOUNT
BRACKET
SUSPENSION MOUNT USING
STANDARD BRACKET
BEAM MOUNT USING
STANDARD BRACKET
EXTENSION MOUNT KIT WITH POLES
SUSPENSION MOUNTING
WITH STANDARD BRACKET
TWIN MOUNTING BRACKETS
END TO END MOUNTING BRACKET
STANDARD MOUNTING BRACKETS
INCLUDED IN BOX
BEAM MOUNT
WITH STANDARD BRACKET

R A D I A N T O U T D O O R H E A T E R S
11
Standard mounting brackets
The HEATSTRIP
®
Max comes with a pair of standard mounting rackets. These adjusta le rackets allow direct ceiling or
wall mount, and come with preset angle options of parallel, 22.5° and 45°.
The flexi le standard mounting racket can e turned 90 degrees to mount onto a eam, it can also e used to suspend
with chains.
The rackets need to e mounted onto a secure frame or wall with a minimum distance etween the two rackets. The
minimum distance (“B”) for each model is listed in the ta le elow.
When completing the installation, ensure all screws are tight and unit is secure.
Note: When suspension mounting, chains are not included.
PART No PACKAGED
DIMENSIONS (mm)
WEIGHT (kg)
ZBRAK-85 100 x 100 x 25 0.5
MATERIALS
316 SS
Standard Mounting Bracket
CEILING MOUNTING
BEAM MOUNTING
SUSPENSION MOUNTING
WALL MOUNTING
CEILING
100
80
170

R A D I A N T O U T D O O R H E A T E R S
12
MODEL “B”
MINIMUM DISTANCE (mm)
THX2400 400
THX3600 600
"B"
MOUNTING
Fix the two mounting rackets to the ceiling or wall in the desired location (refer minimum racket centre chart).
Make sure the method of fixing ( olts or screws) will e more than strong enough to support weight of heater
allowing for strong winds and other conditions.
Fix the L rackets to the threaded connectors in the required locations on rear of heater to match the centres of
the mounting rackets.
Lift heater into position and secure the mounting rackets to the L rackets using the screws provided.
Locate the C cutout on the L racket onto the stud in the mounting racket so you achieve either horizontal or
angle mounting position as required.
Tighten all screws/ olts/nuts.
NOTE: the standard racket allows for normal or angle mounting of the heater and is suita le for ceiling or wall
mounting.

R A D I A N T O U T D O O R H E A T E R S
13
Twin mounting bracket
PART No PACKAGED
DIMENSIONS (mm)
EIGHT
(kg)
THXAC-018 220 x 100 x 25 1
MATERIALS
316 SS
The optional Twin Mount racket allows for two (2) units of HEATSTRIP
Max to e mounted side- y-side, either in parallel or angled as per the
diagram on the right. This is ideal for applications when a wider heat
coverage is required, or when there is mounting restrictions/limitations
(such as running etween 2 rows of ta les etc.)

R A D I A N T O U T D O O R H E A T E R S
14
End to end mounting bracket
PART No PACKAGAED
DIMENSIONS (mm)
EIGHT
(kg)
THXAC-019 260 x 50 x 50 0.5
MATERIALS
316 SS
The end to end racket allows multiple units to e joined in a straight line for maximum heat performance
and aesthetic appeal. This is ideal for applications such as long rows of ta les and assem ly lines, where a
constant heat coverage is required.
The racket allows for a 50mm gap etween units and an opening for the power connection. As per the dia-
gram elow, units should e mounted with the power leads together.
The end to end racket can e used with either the standard ceiling/wall mount racket or the extension
racket & pole kit.

R A D I A N T O U T D O O R H E A T E R S
15
Extension Mount Bracket
PART No PACKAGED
DIMENSIONS (mm)
EIGHT
(kg)
MATERIALS NOTES
THHAC-005 300 x 150 x 50 2 316 SS Kit includes 2x300mm extension pole, screws
and rackets
THHAC-006 600 x 150 x 50 2 316 SS Kit includes 2x600mm extension pole, screws
and rackets
THHAC-007 900 x 150 x 50 2.5 316 SS Kit includes 2x900mm extension pole, screws
and rackets
THHAC-008 1200 x 150 x 50 3 316 SS Kit includes 2x1200mm extension pole, screws
The Extension Mount racket allows HEATSTRIP
®
Max units to e lowered from high ceilings, using rigid con-
nections. The rackets are for use with 25mm x 25mm x 1mm tu e (SHS), supplied as a complete kit with
rackets, pre-cut poles and connections. The standard length options as part of the kit are 300mm, 600mm,
900mm and 1200mm.
The kits include all rackets, poles and screws necessary for connection to the heaters, however it does not
include screws for attachment to the ceiling.
300
600
388
900
1200
688
988
1288

R A D I A N T O U T D O O R H E A T E R S
16
Safety
HEATSTRIP
®
Max has an IP rating of X5. This means it is safe for water ingress from all directions. The HEATSTRIP
®
can e safely hosed down.
HEATSTRIP
®
has undergone extensive testing oth in la oratory conditions; in Thermofilm’s manufacturing facility in
Mel ourne and field trials in Australia, Europe and overseas. It has een this testing that gives the purchaser the
confidence of a high quality product.
Independent la oratory testing has confirmed full compliance with Australian and other International Standards. This
includes CE, AS/ANZ, UL/CSE
The heater comes in oth plug (2400W) and hardwired (3600W) versions. In oth cases the fixed wiring must e installed
y a licensed electrician in accordance with the relevant wiring regulations.
HEATSTRIP
®
is Class 1 equipment and must e earthed.
In operation, this heater is VERY HOT— do not touch any part of the heater while it is turned on. Do not touch any part
until 30 minutes after it is turned off.
This appliance is not intended for use y persons (including children) with reduced physical, sensory or intellectual
capa ilities, or lack of experience and knowledge, unless they have een given supervision or instruction concerning use
of the appliance y a person responsi le for their safety. Children should e supervised to ensure they do not play with the
appliance.
Do not allow any ca les, furnishings, flamma le materials or other items come in contact with any surface of the heater.
If installed in wet areas, the heater switches or controls must e located so that they cannot e touched y persons in the
ath or shower.
The heater needs to e installed as per the installation instructions paying special attention to the minimum clearances.
The heater needs to e mounted on a rigid racket or fixing.
The heater must not e mounted immediately elow or in front of a socket outlet.
In case of a heater fault or damaged supply lead, the appliance should e returned to the point of purchase for return to
Grand Hall Europe B.V. for repair.
Maintenance
The HEATSTRIP
®
is made from dura le materials, however regular care and maintenance of your heater will help prolong
the life of the heater.
It is recommended that you hose down the heater and with a soft cloth gently wipe the surfaces of the heater with a mild
detergent to remove the uilt up contaminants from the environment. Then rinse all detergent off the heater.
All chemicals in the atmosphere including cigarette smoke, pollution etc. will tarnish the surface of the heater. In this case,
additional cleaning and maintenance may e required. The cleaning process at least every three months will reduce the
amount of uild up and keep it looking as est it can. If the heater is in a corrosive environment eg. salt spray, we
recommend that you clean your heater with a light spray of fresh water every week. After cleaning, turn the heater on for
20 minutes to dry any water residue and prevent water staining.
Before cleaning or inspection activity, the heater must e switched off and cooled down completely.
Do not use any a rasive materials or products to clean the heater, this includes solvents, citrus ased cleaners or other
harsh cleaning products.
When handling the heater, ensure that your hands are clean or that you use clean gloves as grease or dirt can mark the
surface of the heater.
Do not use high pressure water to clean heaters, light water spray only.

R A D I A N T O U T D O O R H E A T E R S
17
1x THX2400
3x THX3600
THX2400
HEATER
FIELD WIRINGIN SWITCHBOARD
TT-MTM
WALL CONTROLLER
MAXIMUM 15A
ACTIVE
NEUTRAL
EARTH
10A
1x THX2400
THX2400
HEATER
FIELD WIRINGIN SWITCHBOARD
TT-MTM
WALL CONTROLLER
MAXIMUM 15A
ACTIVE
NEUTRAL
EARTH
10A
RCD
CIRCUIT
BREAKER
RCD
CIRCUIT
BREAKER
ISOLATOR
ISOLATOR
THX3600
HEATER
15A
ISOLATOR
RELAY
ISOLATOR
ACTIVE
NEUTRAL
EARTH
RCD
ACTIVE
NEUTRAL
EARTH
RCD
THX3600
HEATER
15A
THX3600
HEATER
15A
1x THX3600
THX3600
HEATER
FIELD WIRINGIN SWITCHBOARD
TT-MTM
WALL CONTROLLER
MAXIMUM 15A
ACTIVE
NEUTRAL
EARTH
15A
RCD
CIRCUIT
BREAKER ISOLATOR
Heater wiring schematic diagrams
The HEATSTRIP
®
Max is required to e fitted with an "ON/OFF" isolation switch.
When more units need to connected from the same switch, a relay is needed. It is recommended that you talk to your
electrician for more detail.
When using contactors or relays ensure there is a minimum load of 250W on the controller.

R A D I A N T O U T D O O R H E A T E R S
18
arranty Terms & Conditions
The elow Warranty Terms and Conditions apply for international warranty only.
Grand Hall B.V. warrants to the original owner that HEATSTRIP
®
Max products will e free from defects in materials and
workmanship for a period of 12 months from the date of purchase in accordance with the following warranty terms and
conditions.
Provision of this warranty is su ject to:
• The HEATSTRIP
®
product must e installed in accordance with the Installation Instructions and relevant electrical
standards and codes.
• The HEATSTRIP
®
product must e maintained and cleaned according to instructions detailed in the Installation Manual.
• There is no warranty expressed or implied with regard to capacity requirements. The selection of the unit or units
depends entirely upon the system design and capacities as determined y the purchaser.
• The customer has not repaired, opened or altered the product in any unauthorised manner.
• This warranty excludes damage to the product or components arising from circumstances outside the control of Grand
Hall B.V., including, ut not limited to, where the product is not used for intended purpose; where the product has
een rectified in any way; incorrect installation; incorrect power supply; damaged caused during delivery; misapplication,
misuse, a use, vandalism, lack of maintenance or accident.
• Grand Hall Europe’s o ligations under this warranty are limited to repair or replacement at Grand Hall Europe B.V. of any
components of the product which Grand Hall Europe B.V. identifies to its satisfaction to e defective.
• Transportation charges involved in return of the product to Grand Hall Europe B.V. is the sole responsi ility of the
customer.
• All products are inspected and tested efore despatch and are at the risk of the purchaser after the shipment from Grand
Hall Europe B.V., if not delivered y Grand Hall Europe B.V. to destination.
• Discolouration of the surface may occur after a period of time, this does not constitute a warranta le event.
• Twisting and ending of the heaters may occur, this does not constitute a warranta le event.
• No products or components will e supplied in advance of an examination of the faulty product or components y Grand
Hall Europe B.V. or an authorized representative of Grand Hall Europe B.V.
• Grand Hall Europe B.V. does not participate in any site related costs or la our expenses incidental to replacement of
parts, repairing, removing, installing, servicing, transportation or handling of parts to complete products, and assumes no
lia ility on parts repaired or replaced without written authorisation. Grand Hall Europe B.V. shall not e lia le for any
default or delay in performance of its warranty o ligations caused y any circumstances eyond its control, including, ut
not limited to, judicial or government restrictions, strikes, fires, floods, a normal weather conditions, delayed supply of
components.
Should products e determined as damaged on arrival, immediately notify the transport company of the condition and have
them noted on the freight documents. If damage is discovered after unpacking, demand immediate inspection y the
transportation company and insist that a record of the damage is made on the freight documentation.
The customer warrants using the product in accordance with:
• Any instructions provided to it y Grand Hall Europe B.V. from time to time.
• All government and local regulations, including ut not limited to all relevant electrical, environmental laws and
regulations governing the installation, storage, use, handling and maintenance of the goods.
• All necessary and appropriate precautions and safety measures relating to the installation, storage, use, handling and
maintenance of goods.
DISTRIBUTOR DETAILS FOR
EUROPE & UNITED KINGDOM
Distributed by: Manu actured by:
Grand Hall Europe B.V. Thermo ilm Australia Pty. Ltd.
Tolstraat 17A 27 Rosalie St
7482 DC Haaksbergen, The Netherlands Springvale, ictoria, 3171 Australia
www.heatstrip.eu

R A D I A N T O U T D O O R H E A T E R S
HANDLEIDING VOOR BEDIENING, INSTALLATIE EN ONDERHOUD
HEATSTRIP® Max – EUROPA
De heater a ls d e s i g nelement!

R A D I A N T O U T D O O R H E A T E R S
20
Productoverzicht Rev. B MAY13
Heatstrip®-heaters voor buitenruimtes of moeilijk te verwarmen binnenruimtes
Omdat er bu ten of n open b nnenru mtes vaak een constante luchtstroom s, z jn veel terraskachels gebaseerd op
convect ewarmte waarmee de lucht verwarmd wordt. D t kan u termate onprakt sch z jn voor d t soort locat es, omdat de
verwarmde lucht eenvoud g weggeblazen kan worden door natuurl jke luchtstromen. Straalkachels verwarmen objecten
rechtstreeks door m ddel van nfrarode stral ng.
Terw jl convect ekachels de lucht tussen objecten verwarmen, verwarmen straalheaters de oppervlakte van de objecten
zelf. HEATSTRIP®-straalheaters z jn effect ever n bu tenru mtes en n et-geïsoleerde ru mtes omdat ze ger cht warmte
afgeven aan de mensen en objecten n hun baan.
Discrete, stijlvolle heater voor overdekte buitenruimtes en open binnenruimtes
Dankz j het straalkachelpr nc pe kan HEATSTRIP® effect eve en energ ezu n ge comfortverwarm ng leveren voor
overdekte bu tenru mtes en open b nnenru mtes. Dankz j HEATSTRIP® kunnen veel u tgaansgelegenheden zoals
restaurants, kroegen en clubs dag en nacht en n alle se zoenen gebru k maken van hun terras. Op uw werkplaats of n uw
bedr jf kan HEATSTRIP®-comfortverwarm ng b eden voor aangewezen rookplekken en recreat egeb eden, maar ook
puntverwarm ng voor werkplaatsen n fabr eken, magaz jnen en showrooms. Thu s kan HEATSTRIP®-
comfortverwarm ng b eden onder overkapp ngen t jdens het bu ten eten en barbecueën, of op pat o’s, veranda’s,
b nnenplaatsen en balkons.
Er z jn dr e versch llende productser es n de Heatstr p®-productcategor e. Ze hebben elk een versch llende
temperatuuroutput, waardoor ze gesch kt z jn voor versch llende toepass ngen. H eronder v ndt u een l jst met
veelvoorkomende toepass ngen om u te helpen de effect efste en eff c ëntste ser e te k ezen. D t s slechts een algemene
g ds; raadpleeg de producthandle d ng voor elk product voor meer nformat e.
HEA S RIP® Design (THD-modellen) s een prem um heater met hoge temperatuur en s vooral bedoeld voor
bu tenru mtes met 1, 2, 3 of 4 afgesloten z jden en met een deale montagehoogte van 2,1 m tot 2,7 m.
HEA S RIP® Max (THX-modellen) s een heater met extreem hoge temperatuur voor n et-overdekte of open geb eden
met een montagehoogte van 2,4 m tot 3,5 m.
HEA S RIP® Indoor (THS-modellen) s een heater met een gem ddelde ntens te t voor toepass ngen n beschermde
b nnenru mtes.
OEPASSING THS THH THX
Geïsoleerde b nnenru mtes, klaslokalen, kantoren, badkamers, vocht ge geb eden, droogru mtes √ √ X
Bu ten overdekt, café, veranda, pat o, balkon met plafond van 3 m of lager X √ X
Bu ten overdekt, café, veranda, pat o, balkon met plafond van 3 m of hoger X X √
Zeer open terre n bu ten X X √
Open ru mte b nnen, magaz jn, fabr ek, product efac l te t, sportfac l te ten √ √ √
Puntverwarm ng b nnen, boven tafels, montageru mtes X √ √