Henderson Easyclose User manual

Tools Required
Tape measurePosidrive screwdriver Spirit Level
Easyclose Door Closer x 1
Flex Bracket Base Plate x 1
T-Screw x 1
(for fixing Flex bracket
to the base plate)
Long Screw Ax 2
(for mounting door closer)
Screw Ax 2
Short Screw Bx 3
(for mounting base plate)
Flex Bracket x 1
The Easyclose door closer uses pneumatic technology to automatically keep your door closed.
The standard length of retracted closer body is 28”/70cm, with maximum travelling of 50”/125cm, suitable for most width doors.
IMPORTANT information before installation
4The closing performance of Easyclose is affected mainly by the door’s rolling efficiency.
4If the rolling efficiency is not smooth enough the Easyclose may not show its best closing performance.
4Atop rolling system on doors is smoother than floor track doors, enhancing the Easyclose performance.
Move the door to the closed position and install the closer on the top jamb of the door
with the 2 long screws supplied, ensure the unit is level in the horizontal plane.
Contents of the Kit
1, Install the closer unit - See Appendix A for possible fitting options
Easyclose 100kg
FITTING INSTRUCTIONS - NOTICE DE POSE - MONTAGE HANDLEIDING - MONTAGEANLEITUNG
ISTRUZIONI DI MONTAGGIO - INSTUCCIONES DE MONTAJE
1270mm/50”
711mm/28”

Closer Pin
Flex Bracket
T-Screw
SLOW FAST
5. Fitting the optional fascia
Mount the Flex bracket base plate with the 3
small screws Bsupplied.
2. Fit the Flex bracket base plate
Attach the Flex bracket
with the T-Screw to the
base plate, lift the brack-
et until it engages with
the closer pin and lock
in position by tightening
the T-Screw.
To disconnect the auto close func-
tion, simply loosen the T-Screw and
move the Flex bracket down until it
detaches from the closer pin.
The closing speed can be regulated
by turning the adjusting screw
clockwise for slower and anti-
clockwise for faster.
Check the opening and closing
operation for obstructions which
could effect the units performance.
To fit the optional fascia simply hang the fascia on the
top fixing blocks and press the bottom of the fascia
until it clicks into position.
3. Fit the Flex bracket 4. Regulate the closing speed

Face fixing using the Husky track system - Method 1
Face fixing using the Husky track system - Method 2
APPENDIX A - Husky Track Suggested Fitting Methods
CALCULATING F
B F
20 - 28 36
28 - 34 B/2 +22
34-50 B+5
B
75
6
F
B
G
30
F
CALCULATING F AND G
B F G
20 - 28 B/2 +49 B/2 +19
28+ B+36 B+4
CALCULATING F
B F
20 - 28 36
28 - 34 B/2 +22
34 - 50 B +5
B
75
6
F
B
G
30
F
CALCULATING F AND G
B F G
20 - 28 B/2 +49 B/2 +19
28+ B+36 B+4
FASCIA NOT SUPPLIED BY PCH - FASCIA TO OVERLAP DOOR BY 5mm
FASCIA TO BE AT LEAST 10 mm THICK - CONSULT TABLES FOR VALUES

Face fixing using the Husky track system - Method 3
Soffit fixing using the Husky track system
B
60
40 2 blocks per installation *
2 screws per block *
40
40
15
F
F
CALCULATE F
B F
20-28 75
28-50 B/2 +61
B
60
402 blocks per installation *
2 screws per block *
40
40
15
F
F
CALCULATE F
B F
20-28 75
28-50 B/2 +61
i) Drill holes in track x2 approx. 20mm apart for each block.
ii) Fix 2x blocks - position depends on door closed.
iii) Fix Easyclose using screws A.
*NOT SUPPLIED BY PCH

Face fixing using the Soltaire track system - Method 1
Face fixing using the Soltaire track system - Method 2
CALCULATING F
B F
19 - 37 B/2 +50
37 - 48 B +32
75
7
2
30
F
F
B
B
CALCULATE F
B F
19 - 40 43
40 - 48 B +4
CALCULATING F
B F
19 - 37 B/2 +50
37 - 48 B +32
75
7
2
30
F
F
B
B
CALCULATE F
B F
19 - 40 43
40 - 48 B +4
Soltaire Track Suggested Fitting Methods
FASCIA NOT SUPPLIED BY PCH - FASCIA TO OVERLAP DOOR BY 5mm
FASCIA TO BE AT LEAST 10 mm THICK - CONSULT TABLE FOR VALUE F

Face fixing using the Soltaire track system - Method 3
Soffit fixing using the Soltaire track system
CALCULATING F
B F
19-40 82
40 - 48 B +42
70
15
40 40
40
40
2
2 blocks per installation *
2 screws per block *
CALCULATING F
B F
19 - 40 82
40 - 48 B +42
70
15
4040
40
40
2
2 blocks per installation *
2 screws per block *
i) Drill holes in track x2 approx. 20mm apart for each block.
ii) Fix 2x blocks - position depends on door closed.
iii) Fix Easyclose using screws A.
*NOT SUPPLIED BY PCH

Part No: 669237
January 2017 - Issue 2
P C Henderson Limited, Durham Road, Bowburn, County Durham DH6 5NG, UK. Web: www.pchenderson.com
UK Customer Services Department: Tel: [phone] Fax: [phone] Email: [email protected]
Export Department: Tel: [phone] Fax: [phone]. Email: [email protected].
For all technical queries email our Technical Department: [email protected]
Face fixing using the Marathon track system
Soffit fixing using the Marathon track system
B
B + 8
75
B+35
2
30
B
B
B + 8
75
B + 35
2
30
B
Marathon Track Suggested Fitting Methods
FASCIA NOT SUPPLIED BY PCH - FASCIA TO OVERLAP DOOR BY 5mm - FASCIA TO BE AT LEAST 10 mm THICK