Herman Miller Aria Desk User manual

1B4BLK rev B
.
Install leg by placing over three bolts in corner of desk top. Align the face of
the leg with the outer edge of the desk top. Loosely attach with three lock
nuts. Repeat for remaining legs. Tighten all lock nuts on all legs and brackets
using wrench provided.
Step 
.
Position desk top upside down on a clean sosurface. Install bracket
over bolts on edge of top as shown. Loosely attach with two lock nuts.
Do not tighten. Repeat for remaining bracket on opposite edge.
Step 
Wrench
Desk Top Leg  Small Organizer Tray
Large Organizer Tray )
Bracket ()
Covers
Lock Nut )
Parts Included
Tools Required
Hardware Pack
HermanMiller
Airia™Desk Installation
How to assemble your Desk.
Face
HermanMiller Airia™ Assembly Instructions1

1B4BLK rev B
.
With help from an assistant, turn desk right side up.
.
Place covers onto top of desk.
Step 
.
Remove any existing packaging around drawer.
.
Open drawer and place organizer trays inside.
Step 
Step 
.
Adjust leveling glides by rotating.
For more information about our products and services please visit us at
hermanmiller.com or call ()  .
© Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. BBLK B
Airia ™ is among the trademarks of Herman Miller, Inc.
Glide
HermanMiller Airia™ Assembly Instructions2