Herman Miller Eames CTM User manual

2.1
Position base to the top in a way the screw holes on the base are aligned to the screw holes
on the top.
Step 2
1.1
Position Top upside down.
Step 1
Power Driver
Parts Included
Tools Required
(3) Screws (Qty: 8)
(2) Base (Qty: 4) Metal Leg
(2) Base (Qty: 4) Wood Leg
How to assemble
your table.
HermanMiller
The Collection
Eames® Molded Plywood Coffee Table (CTM Shown)
CTM - Metal Legs
CTW - Wood Legs
For more information about our products and services or to see a list of dealers, please visit us at
hermanmiller.com or call [phone].
© 2013 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. 1bbf9x - A.
® Y, Eames are among the registered trademarks of Herman Miller, Inc.
(1) Top
(OR)
HermanMiller Eames®Table Assembly Instructions1

HermanMiller Eames®Table Assembly Instructions2
3.1
Push legs towards center before tightening. See step 3-A.
5.1
Repeat steps 2 & 3 to assemble the remaining 3 legs.
Metal Leg Metal Leg
Wood Leg Wood Leg
6.1
Rotate the table back to its original position.
4.1
Using power driver tighten the screws. See step 4-A.
Step 3
Step 5 Step 6
Step 4
Step 3-A Step 4-A