RiverRidge 02-250 User manual

ITEM #: 02-250 White
RiverRidge®Kids Bookrack with Two Cubbies
SEE FULL WARNING ON PAGE 2
ADULT ASSEMBLY REQUIRED
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
This product is suitable for children 3 years and older.
ASSEMBLY INSTRUCTIONS

WARNING
SERIOUS OR FATAL INJURIES CAN OCCUR FROM FURNITURE
TIP-OVER. IN ORDER TO PREVENT OVERTURNING, THIS
PRODUCT MUST BE USED WITH THE TIP-OVER RESTRAINTS
OR WALL MOUNTING HARDWARE PROVIDED.
PLEASE READ WARNINGS BELOW.
• Product must be assembled exactly per these instructions. Failure to
follow assembly instructions may result in possible risk of injury.
• Young children can be seriously injured or killed if furniture tips over.
Install tip-over restraint provided. Use of tip-over restraints may only
reduce, but not eliminate, the risk of tip-over.
• To help prevent furniture from tip-over or fall, this product must be
secured to the wall using enclosed tip-over restraints or wall
mounting hardware.
• Tip-over restraints and wall mounting hardware are provided with this
product, however, you may need to source suitable hardware for your
wall type. If in doubt, please consult a qualified tradesperson.
• Always check the suitability of the wall to ensure the tip-over restraints
or wall mounting hardware will resist the forces applied to it.
• Always ensure any wall used for tip-over restraints or wall mounting
hardware is free from hidden electrical wires, water, or gas pipes.
• Do not use this item for a TV stand or place heavy objects on top
of item.
• Place heaviest items in the lowest drawers or shelves.
• Never allow children to climb or hang on to the drawers, doors,
or shelves.
• Never open more than one drawer at a time or defeat/remove any
drawer interlock system.
Weight Capacity: This product will hold up to 10 pounds (4.5kgs) per shelf
and 20 pounds (9kgs) per cubby for a total weight of 80 pounds (36.3kgs).
Please do not overload product for risk of damage and/or serious injury or
death.

PARTS LIST
Left Side Panel1PC
QTYNO DESCRIPTION
1
Right Side Panel1PC2
Back Panel #11PC3
Back Panel #21PC4
Back Panel #31PC5
Back Panel #41PC6
Small Shelf3PCS7
Middle Board1PC8
Upper Cross Bar1PC9
Divider Board1PC10
Back Board1PC11
Bottom Shelf1PC12
Lower Cross Bar1PC13
2
1
3
4
5
6
8
10
11
12
7
7
7
9
13

Adjustable Anchor Bracket
Plastic Anchor
Cam Bolt
Cam Lock
Wood Dowel
Screw (4x35mm)
Screw (4x30mm)
Screw (4x10mm)
PARTS LIST
2 PCS
34PCS
20PCS
20PCS
2PCS
2PCS
12PCS
A
B
C
D
E
F
G
2PCS
H
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
NO PARTS QTY DESCRIPTION
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.

STEP 1
STEP 2
1. Screw 2 cam bolts (A) into cam bolt holes on middle board (8).
2. Insert 4 wood dowels (C) into wood dowel holes on middle board (8), then attach upper cross
bar (9) and back panel #4 (6) to middle board (8) by inserting wood dowels (C) into wood
dowel holes.
3. Insert 4 screws (E) through holes on middle board (8), then tighten to upper cross bar (9) and
back panel #4 (6).
1. Insert 2 wood dowels (C) into wood dowel holes on small shelf (7).
2. Attach small shelf (7) to back panel #3 (5) by inserting 2 wood dowels (C) into wood dowel
holes on back panel #3 (5). Insert 2 screws (E) through holes on small shelf (7), then tighten
to back panel #3 (5).
3. Insert 2 wood dowels (C) into wood dowel holes on back panel #4 (6).
4. Attach small shelf (7) and back panel #3 (5) to back panel #4 (6) by inserting 2 wood
dowels (C) into wood dowel holes on small shelf (7).
6
8
8
9
A
A
C
C
C
C
E
E
EE
5
5
6
7
7
C
C
C
C
E
E
8
9

1. Insert 2 wood dowels (C) to wood dowel holes on small shelf (7).
2. Attach small shelf (7) to back panel #2 (4) by inserting 2 wood dowels (C) into wood dowel
holes on back panel #2 (4). Insert 2 screws (E) through holes on small shelf (7), then tighten
to back panel #2 (4).
3. Insert 2 wood dowels (C) into wood dowel holes on back panel #3 (5).
4. Attach small shelf (7) and back panel #2 (4) to back panel #3 (5) by inserting 2 wood
dowels (C) into wood dowel holes on small shelf (7).
1. Insert 2 wood dowels (C) into wood dowel holes on small shelf (7).
2. Attach small shelf (7) to back panel #1 (3) by inserting 2 wood dowels (C) into wood dowel
holes on back panel #1 (3). Insert 2 screws (E) through holes on small shelf (7), then tighten
to back panel #1 (3).
3. Insert 2 wood dowels (C) into wood dowel holes on back panel #2 (4).
4. Attach small shelf (7) and back panel #1 (3) to back panel #2 (4) by inserting 2 wood
dowels (C) into wood dowel holes on small shelf (7).
STEP 3
STEP 4
5
44
7
7
C
C
CC
E
E
4
7
7
C
C
C
C
E
E
33

1. Insert 2 wood dowels (C) to wood dowel holes on bottom shelf (12).
2. Attach divider board (10) to bottom shelf (12) by inserting 2 wood dowels (C) into wood dowel
holes on divider board (10). Insert 2 screws (E) through holes on bottom shelf (12), then
tighten to divider board (10).
1. Attach divider board (10) and bottom shelf (12) to middle board (8) by inserting cam bolts (A)
into cam lock holes on divider board (10).
2. Insert 2 cam locks (B) into cam lock holes on divider board (10), then rotate clockwise to
secure cam bolts (A) in place.
3. Insert 2 wood dowels (C) into wood dowel holes on bottom shelf (12).
4. Attach lower cross bar (13) to bottom shelf (12) by inserting wood dowels (C) into wood dowel
holes on lower cross bar (13).
STEP 5
STEP 6
C
C
E
E
10
12
10
12 B
B
8C
C
12
13

1. Screw 9 cam bolts (A) into cam bolt holes on left side panel (1).
2. Screw 9 cam bolts (A) into cam bolt holes on right side panel (2).
1. Insert 7 wood dowels into wood dowel holes on left side panel (1).
2. Attach left side panel (1) to assembled unit by inserting cam bolts (A) into cam lock holes
and wood dowels (C) into wood dowel holes on assembled unit.
3. Insert 9 cam locks (B) into cam lock holes on assembled unit, then rotate clockwise to secure
cam bolts (A) in place.
STEP 7
STEP 8
A
AAA
A
A
AA
2
1
1
3
12
8
CCCC
C
C
B
B
B
B
B
B
B
B
B

1. Slide back board (11) into grooves on bottom shelf (12), middle board (8) and left side
panel (1).
2. Insert 7 wood dowels (C) into wood dowel holes on right side panel (2).
3. Attach right side panel (2) to assembled unit by inserting cam bolts (A) into cam lock holes and
wood dowels (C) into wood dowel holes on assembled unit. Make sure back board (11)
slides into grooves on right side panel (2).
4. Insert 9 cam locks (B) into cam lock holes on assembled unit, then rotate clockwise to secure
cam bolts (A) in place.
1. Attach 2 adjustable anchor brackets (G) to middle board (8) by inserting 2 screws (D) through
holes on brackets (G), then tighten to middle board (8).
STEP 9
STEP 10
D
G
2
CC
CC
C
CC
B
B
B
B
B
B
B
B
3
11
12
D
G
D
G
2
8
1

STEP 11
DRYWALL
WALL ANCHOR
WITH SCREW
SCREW
ONLY
DRYWALL
OPTION #2
OPTION #1
WOOD
STUD
H
H
G
F
F
F
H
H
F
F
Option #1: Securing to Drywall
1. Position bookrack against wall in desired location. Using a pencil, make 2 small marks on wall through
holes on brackets (G). Move bookrack away from wall and screw 2 plastic anchors (H) into wall on
pencil marks.
2. Place bookrack against wall, insert 2 screws (F) through holes on brackets (G), then tighten to plastic
anchors (H).
Option #2: Securing to Drywall and Wood Stud
1. Position bookrack against wall in desired location. Insert 2 screws (F) through holes on brackets (G),
then tighten through drywall and into wood stud.
*Tip: Anchor brackets (G) can be adjusted to correct distance from wall to cabinet as needed. Once adjusted,
be sure to re-tighten brackets inside cabinet for stability.

IMPORTANT:
Keep assembly instructions for future reference.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose
screws/parts. Take appropriate action necessary to correct hazards such as tightening
of screws and taking any damaged parts away from children.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
WARNING Please make sure youritem is
secured to the wall, per assemblyinstructions.

To order replacement parts at no cost to you,email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016
Thank you for purchasing this RiverRidge®Home item. We hope you
enjoy it and consider purchasing other RiverRidge®items.
Enjoy your new RiverRidge®Bookrack!