Herman Miller Motia Sit-to-Stand Table Installation instructions

Power Driver Phillips Bit
Tools Required
HermanMiller
MotiaTM Sit-to-Stand Table
Leg Disassembly Instructions
How to disassemble your table leg.
Step 
1.1 Remove the screws using power driver.
2.1 Remove the actuator palte from the leg. 3.1 Turn around the leg and take o the bottom screws using Phillips #2.
Step  Step 
Disassembly Instructions1HermanMiller for Motia TM BGYVJ rev A

Step 
4.1 Turn around the leg and remove the slim drive from the leg.
Disassembly Instructions2HermanMiller for Motia TM BGYVJ rev A

Disassembly Instructions3HermanMiller for Motia TM BGYVJ rev A
Power Driver
Tools Required
HermanMiller
MotiaTM Sit-to-Stand Table
Double Stage Leg Disassembly Instructions
How to disassemble your table leg.
Step 
1.1 Remove the screws using power driver.
2.1 Remove the actuator palte from the leg. 3.1 Turn around the leg and take o the bottom screws using Phillips #2.
Step  Step 
Phillips Bit

Disassembly Instructions4HermanMiller for Motia TM BGYVJ rev A
For more information about our products and services please visit us at
hermanmiller.com or call [phone].
©2016 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. BGYVJ  A
® , HermanMiller for MotiaTM Table is among the registered trademarks of Herman Miller, Inc.
Step  Step 
4.1 Remove the lower leg. 5.1 Remove the slim drive from the leg.