Herman Miller Nevi User manual

Herman Miller Nevi Gaming Desk Assembly Instructions
1
Tools Required
IMPORTANT!
PLEASE READ THIS GUIDE THOROUGHLY BEFORE
BEGINNING INSTALLATION.
IT IS STRONGLY RECOMMENDED THAT INSTALLATION BE
PERFORMED BY AT LEAST 2 PEOPLE. FAILURE TO DO SO MAY
RESULT IN PRODUCT DAMAGE AND/OR PERSONAL INJURY.
PLEASE SAVE THESE INSTRUCTIONS FOR DISASSEMBLY
OR RECONFIGURATION.
WARNING
PRODUCT IS NOT MADE FOR CHILDREN’S USE!
DO NOT LET YOUR CHILD USE THE HEIGHT
ADJUSTMENT UNATTENDED!
HermanMiller
Nevi Gaming Desk
Contents
Safety information 
Parts Included 
Identifying the Work Surface Holes 
Motor Cable and E-Beam Clip Connection 
Work Surface and Motor Housing Position 
Control Box, Motor Retaining Bracket and
Controller Switch Attachment 
Cable Routing 
Motor Housing Attachment 
Leg and Spacer Plate Position 
Work Surface Support Attachment 
Foot, Glide and Centre Beam Attachment 
Cable Tray Attachment 
Final Assembly 
Levelling 
Height-Adjustment System Set-Up/Reset 
Control Switch 
Wiring Diagram 
Control Box 
Notes 
Trouble Shooting and Feedback Click Codes 
Translations
For translated versions of this document please visit the following links:
UK. cdn.shopify.com/s/les/////les/
nevi_gaming_desk_instructions_en-gb.pdf
FR. cdn.shopify.com/s/les/////les/
nevi_gaming_desk_instructions_fr-fr.pdf
DE. cdn.shopify.com/s/les/////les/
nevi_gaming_desk_instructions_de-de.pdf
IT. cdn.shopify.com/s/les/////les/
nevi_gaming_desk_instructions_it-it.pdf
ES. cdn.shopify.com/s/les/////les/
nevi_gaming_desk_instructions_es-es.pdf
Part # 1BRZZ5 Rev C
How to install your Nevi Gaming Desk
Star-headed
Magnetic
Screwdriver
Spirit LevelHex Allen Key
Size 
Hex Allen Key
Size 
Open Spanner
Size 9
Zand Yare among the registered trademarks of Herman Miller, Inc.
Printed in the UK. Please recycle.
©  Herman Miller, Inc.
All rights reserved.

Herman Miller Nevi Gaming Desk Assembly Instructions
2
MINIMUM
DESK
HEIGHT
MAXIMUM
DESK
HEIGHT
 MM
 MM
 MM
 MM
SAFETY INFORMATION
MAINTAIN A 25 MM GAP FROM ALL SIDES
OF THE WORK SURFACE EDGE
MOVING WORK SURFACE IS A CRUSH HAZARD
REQUIRES TWO PEOPLE TO LIFT
25
mm

Herman Miller Nevi Gaming Desk Assembly Instructions
3
T. Self Adhesive Clip (x) U. E-Beam Cable Clip (x)
Parts Included
Work Surface Pack – DWGTAN
A. Work Surface (x)
V. Motor Retaining Bracket (x)
X. Collision Sensor (x)
W. Pan Head Screw
Size: M x  (x)
Leg Pack – DWGPBU/D.G
B. Leg (x) C. Spacer Plate (x)
(if applicable)
H. Control Box (x) J. Mains Cable (x)
F. Work Surface Support (x) G. Foot (x)
D. Glide (x) E. Controller Switch (x)
Wire Management Pack – DWGP.
K. Centre Beam (x) L. Motor Housing Beam (x)
R. Pan Head Screw
Size: M x  (x)
S. Cable Tray Bracket (x)
P. Button Head Screw
Size: M x  (x)
Q. Socket Head Screw
Size: M x  (x)
M. Cable Tray (x) N. Motor Cable (x)

Herman Miller Nevi Gaming Desk Assembly Instructions
4
BOTTOM OF WORKSURFACE
Identifying the Work Surface Holes
= Screw Holes
L. Motor Housing Beam (x )
E. Controller Switch (x )
F. Work Surface Support (x )
L. Motor Housing Beam (x )
S. Cable Tray Bracket (x )
H. Control Box (x )
F. Work Surface Support (x )
K. Centre Beam (x )
BACK
FRONT

Herman Miller Nevi Gaming Desk Assembly Instructions
5
Step 1. Connect the Motor Cable (if applicable)
Please note the motor may be supplied pre-connected, if so please move to step .
Step 2. Add the E-Beam Cable Clips
L. Motor Housing Beam
N. Motor Cable
L. Motor Housing Beam
N. Motor Cable
U. E-Beam Cable Clip
N. Motor Cable
N. Motor Cable

Herman Miller Nevi Gaming Desk Assembly Instructions
6
Step 3. Position the Work Surface
Assemble on a carpet/rug to protect work surface during assembly.
Step 4. Position the Motor Housing
UNDERSIDE OF WORK SURFACE
A. Work Surface
L. Motor Housing Beam
FRONT

Herman Miller Nevi Gaming Desk Assembly Instructions
7
Step 5. Attach the Control Box
Step 6. Attach the Motor Retaining Brackets and Controller Switch
H. Control Box
R. Pan Head Screw
(x)
V. Motor Retaining Bracket (x)
W. Pan Head Screw
(x)
E. Controller Switch
R. Pan Head Screw
(x)
R.
R.
W.

Herman Miller Nevi Gaming Desk Assembly Instructions
8
Step 7. Route the Cables – Front View
Step 8. Route the Cables – Back View
J. Mains Cable
N. Motor Cable
X. Collision Sensor
E. Controller Switch
E. Controller Switch
N. Motor Cable
J. Mains Cable
E.
X.
N.
J.
FRONT
BACK
X.

Herman Miller Nevi Gaming Desk Assembly Instructions
9
Step 9. Rotate the Motor Housing
Handle with care to avoid damaging cables.
Step 10. Attach the Motor Housing
Handle with care to avoid damaging cables.
L. Motor Housing Beam
L. Motor Housing Beam
R. Pan Head Screw
(x)
R.
FRONT
FRONT

Herman Miller Nevi Gaming Desk Assembly Instructions
10
Step 11. Position the Legs (with Spacer Plate)
If no spacer plate is included, please move to step .
Step 12.
B. Leg
C. Spacer Plate
B.
B. Leg

Herman Miller Nevi Gaming Desk Assembly Instructions
11
Step 13. Remove the Legs
Step 14. Add the Spacer Plate
B. Leg
B.
C.
B. Leg
C. Spacer Plate
(x)

Herman Miller Nevi Gaming Desk Assembly Instructions
12
Step 15. Align the Legs
Step 16. Insert the Legs
B. Leg
1.
2.
B. Leg
B.

Herman Miller Nevi Gaming Desk Assembly Instructions
13
Step 17. Position the Work Surface Supports
Step 18. Attach the Work Surface Supports
F. Work Surface Support
P. Button Head Screw
(x)
P.
1.
2.
Hex Allen Key (Size )
F. Work Surface Support
R. Pan Head Screw
(x)
R.

Herman Miller Nevi Gaming Desk Assembly Instructions
14
Step 19. Attach the Feet and Glides
Step 20. Attach the Centre Beam
G. Foot (x)
Q. Socket Head Screw
(x)
D. Glide (x)
K. Centre Beam (x)
R. Pan Head Screw
(x)
R.
Hex Allen Key (Size )
1.
2.
Q.

Herman Miller Nevi Gaming Desk Assembly Instructions
15
Step 21. Attach the Cable Tray Brackets
Step 22. Open the Cable Tray Brackets
R.
S. Cable Tray Bracket (x)
S. Cable Tray Bracket (x)
R. Pan Head Screw
(x)
FRONT
BACK

Herman Miller Nevi Gaming Desk Assembly Instructions
16
Step 23. Position the Cable Tray
Step 24. Close the Cable Tray Brackets
M. Cable Tray
FRONT
BACK
BACK
BACK

Herman Miller Nevi Gaming Desk Assembly Instructions
17
Step 25. Attach the Cable Tray Brackets
Step 26. Operating the Cable Tray
R.
R. Pan Head Screw
(x)
Open Close
1.
2.
2.
1.

Herman Miller Nevi Gaming Desk Assembly Instructions
18
Step 27. Final Assembly
Step 28. Rotate the Desk on to the Feet
BACK
FRONT
REQUIRES TWO PEOPLE TO LIFT

Herman Miller Nevi Gaming Desk Assembly Instructions
19
Step 29. Level the Desk
Step 30. Identify Mains power
D.
J J
UK EU

Herman Miller Nevi Gaming Desk Assembly Instructions
20
Step 31. Set-up/Reset the Height-Adjustment System
Aer installation and connection to
power, the desk’s height-adjustment
system needs to be set-up. In this
state, the table can only be moved
down with reduced speed.
To set-up height-adjustment:
. Lower the table to its lowest
position using the DOWN button
on the Controller switch (E).
. Once the desk has stopped
moving, release the DOWN
button briefly.
. Hold DOWN button again for
 seconds or until the desk
moves down a further - mm,
pauses and then moves up
again the - mm.
. Release the DOWN button.
Note: If the button is released too
early, the set-up procedure will need
to be repeated. Please follow these
instructions each time the desk is
reconnected to power, following a
fault, or aer reconnecting the
drives and the controller.
Control Switch
Lowest position
Raise desk
Lower desk