Herman Miller Nevi Link Guide

Once you hear two clicks, release
the buttons.
How to save a lower and upper height limit
Raise or lower the table to
desired height.
Press and hold the up and down
arrows at the same time until you hear
two quiet clicks (– seconds).
How to calibrate the table
Calibrate at installation so legs are in sync or if legs become out of sync
during operation.
Adjust the table to the lowest height.
The table will begin to readjust itself
if necessary. Release the button once
the table has stopped moving and
clicking. Listen carefully; the clicks
are quiet.
Press the down arrow again and
hold for – seconds.
z Nevi Link Adjustment Guide
1
z
Nevi™Link
Y
Simple Touch Switch Adjustment Guide
How to adjust the height of the table
Press and hold the up arrow to
raise the table.
Press and hold the down arrow
to lower the table.
How to clear a lower or upper height limit
Raise or lower the table to one
of the saved height limits.
Once you hear one click,
release the buttons.
Press and hold the up and down
arrows at the same time until you
hear one click (– seconds).

z Nevi Link Adjustment Guide
2
z
Nevi™Link
Y
z
Renew™ Link
Y
zRenew Link Adjustment Guide
How to adjust the height of the table
You will know the table is working when the paddle turns blue.
Press up on the paddle to raise
the table.
Press down on the paddle to
lower the table.
1
Intuitive Paddle Adjustment Guide
How to calibrate the table
The table will need to be calibrated at the time of installation so legs are in sync
with each other, or if the legs become out of sync during operation.
Adjust the table to the lowest height.
Press the paddle down and hold it
for – seconds.
Release the paddle.
The table will begin to readjust itself if
necessary. Release the button once the
table has stopped moving and clicking.
How to save a lower and upper height limit
Raise or lower the table to
desired height.
Locate the black button on the
underside of the table, behind
the paddle.
Press and hold the black button
until you hear two quiet clicks
(– seconds).
Once you hear two clicks,
release the button.
How to clear a lower or upper height limit
Raise or lower the table to one
of the saved height limits.
Press the black button until you
hear one click (– seconds).
Once you hear one click, release
the button.
Locate the black button on the
underside of the table, behind
the paddle.