Herman Miller Eames Square User manual

Power Driver
3/4” Hex Socket
Top Surface
Threaded Rod
Jam NutWasher
Steel Bushing
(Universal base only)
Lock Washer Screw (4)
Top Casting
Base Casting
(Universal base)
Contract Base
Tube
Ratchet Wrench Torque Wrench
Tools Required
How to assemble
your table.
HermanMiller
The Collection
Eames® Square, Round, and Mobile Table Assembly
For more information about our products and services or to see a list of dealers, please visit us at
hermanmiller.com or call [phone].
© 2013 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. 108445 - L.
® Y, Eames are among the registered trademarks of Herman Miller, Inc.
OR
#3 Phillips Screwdriver
Parts Included
HermanMiller Eames®Table Assembly Instructions1

HermanMiller Eames®Table Assembly Instructions2
1.2
Align top casting on table top.
Step 2
1.1
Invert table top on a clean, Padded surface.
Step 1
1.3
Insert (4) screws and tighten..
2.1
Thread jam nut completely onto one end of threaded rod untill jam nut will not turn.
2.2
Insert rod, jam nut down, and thread completely into top casting. Tighten jam nut against
top casting.
3.1
Place tube over rod onto top casting.
Step 3
4.1
For universal base only-place steel bushing over rod into tube.
Step 4

HermanMiller Eames®Table Assembly Instructions3
5.1
Invert table base casting, casters/glides up, and plave over tube, making sure that base
casting legs are aligned approximately with top casting arms. ( for mobile table only, insert
casters into base).
Step 5
6.1
Assemble washer and lock washer onto threaded rod. Torque jam nut to minimum of 40 ft-lbs.
Step 6
7. 1
Place table in upright position and return to service.
Step 7