Hettich Steelforce Pro SLS Highline 135 Series User manual

Photo shows left side mounting. /
Abbildung zeigt linksseitige Montage. /
De foto toont de montage vanaf de zijkant./
La photo montre le montage à gauche.
SLS-IM0120-3EN-DE-NL-FR-HT
English
Deutsch
Nederlands
Français
Assembly Manual
Read this manual thoroughly and store in a safe place.
Montageanleitung
Bitte sorgfältig lesen und sicher aufbewahren.
Montagehandleiding
Lees deze handleiding aandachtig door en bewaar deze goed.
Manuel de montage
Veuillez lire attentivement ce manuel et le conserver dans un endroit sûr.
SLS Highline 135° SERIES
STEELFORCE PRO

2
English
Content
1GENERAL .................................................................................................................................................................6
1.1 Local value of the assembly/operating manual..........................................................................................................6
1.2 Intended use...................................................................................................................................................................6
1.3 Improper use...................................................................................................................................................................6
1.4 Danger.............................................................................................................................................................................6
1.5 Content box ................................................................................................................................................................ 7-8
2 SAFETY INFORMATION............................................................................................................................................9
2.1 Symbols/Warnings..........................................................................................................................................................9
2.2 Symbols used on the workstation frame.......................................................................................................................9
2.3 Maximum weight allowed on frame.............................................................................................................................9
2.4 Maximum weight allowed per column.......................................................................................................................10
2.5 Organizational measures.............................................................................................................................................10
2.6 Informal safety measures.............................................................................................................................................10
2.7 Note for those assembling the workstation ................................................................................................................10
2.8 Transport and assembly...............................................................................................................................................10
2.9 Use of the workstation frame .......................................................................................................................................10
2.10 Specific dangers...........................................................................................................................................................10
2.11 In an emergency..........................................................................................................................................................11
2.12 Maintenance and upkeep ..........................................................................................................................................11
2.13 Cleaning........................................................................................................................................................................11
2.14 Persistent risks ...............................................................................................................................................................11
3ASSEMBLY..............................................................................................................................................................12
3.1 Mounting the Feet.........................................................................................................................................................12
3.2 Packaging.....................................................................................................................................................................12
3.3 Tightening torques for screws used .............................................................................................................................12
3.4 Pre-assembly of the Crossbars for Frame set-up for 114 cm and 124 cm for Main Return and 118 cm and
128cm for Side Return...................................................................................................................................................12
3.5 Pre-assembly of the Crossbars for Frame set-up for 134 cm and 174 cm for Main Return and 138 cm and
178cm for Side Return...................................................................................................................................................13
3.6 Mounting the Feet.........................................................................................................................................................14
3.7 Mounting the Crossbar and Top Support ....................................................................................................................14
3.8 Mounting the Side Return Crossbar and Top Support ................................................................................................15
3.9 Mounting the Retaining Plate 135° ..............................................................................................................................16
3.10 Mounting the Side Return Top Support........................................................................................................................17
3.11 Mounting the Head Cover ...........................................................................................................................................17
3.12 Mounting the Spacers ..................................................................................................................................................18
3.13 Mounting the Cable Clips............................................................................................................................................18
3.14 Connecting the electrical components .....................................................................................................................19
3.15 Connecting the Extension Cable ................................................................................................................................19
3.16 Mounting the table top ................................................................................................................................................20
3.17 Mounting the power supply underneath the table top..............................................................................................20
3.18 Mounting Wire Clip ......................................................................................................................................................21
3.19 Clearance around the wall or moving parts 25mm of the table top........................................................................21
3.20 Frame test without table top .......................................................................................................................................22
4 CORRECT POSITION OF SEATS ..............................................................................................................................23
5 TECHNICAL SPECIFICATIONS ......................................................................................................................... 24-25
6 OPERATION AND INDICATORS.............................................................................................................................26
6.1 Indicators ........................................................................................................................................................26
7 TROUBLESHOOTING ..............................................................................................................................................26
8 CUSTOMER SERVICE..............................................................................................................................................27
9 MANUFACTURER ...................................................................................................................................................27
10 RECYCLING ...........................................................................................................................................................27
10.1 Taking the workstation out of active duty...................................................................................................................27
10.2 Taking the workstation apart .......................................................................................................................................27
10.3 Recycling ......................................................................................................................................................................27
10.4 WEEE - Waste of Electrical and Electronic Equipment ..............................................................................................27
11 EC-DECLARATION OF CONFORMITY ACCORDING TO MACHINERY DIRECTIVE 2006/42/EC, ANNEX II A ....28

3
Deutsch
Inhaltsverzeichnis
1ALLGEMEINES........................................................................................................................................................29
1.1 Stellenwert der Montage-/Bedienungsanleitung....................................................................................................... 29
1.2 Verwendungszweck..................................................................................................................................................... 29
1.3 Unsachgemäße Verwendung ..................................................................................................................................... 29
1.4 Gefahr ...........................................................................................................................................................................29
1.5 Lieferumfang............................................................................................................................................................30-31
2SICHERHEITSHINWEISE ..........................................................................................................................................32
2.1 Symbol- und Hinweiserklärungen ...............................................................................................................................32
2.2 Verwendete Symbole am Tischgestell........................................................................................................................32
2.3 Zulässiges Gesamtgewicht auf dem Tischgestell ......................................................................................................32
2.4 Zulässiges Gesamtgewicht pro Säule......................................................................................................................... 33
2.5 Organisatorische Maßnahmen ...................................................................................................................................33
2.6 Empfohlene Sicherheitsmaßnahmen.......................................................................................................................... 33
2.7 Hinweise zur Montage..................................................................................................................................................33
2.8 Transport und Montage................................................................................................................................................33
2.9 Verwendung des Tischgestells ....................................................................................................................................33
2.10 Besondere Gefahrenstellen.........................................................................................................................................34
2.11 Hinweise für den Notfall ...............................................................................................................................................34
2.12 Wartung und Instandhaltung .......................................................................................................................................34
2.13 Reinigung ......................................................................................................................................................................34
2.14 Restrisiken .....................................................................................................................................................................34
3MONTAGE .............................................................................................................................................................35
3.1 Überprüfung des Lieferumfangs ..................................................................................................................................35
3.2 Verpackung.................................................................................................................................................................. 35
3.3 Hinweis zum Verschrauben der Beschläge ...............................................................................................................35
3.4 Vormontage der Traverse für Tischgestellbreite Hauptschenkel von 114 cm und 124 cm und Seitenschenkel
von 118 cm und 128 ....................................................................................................................................................35
3.5 Vormontage der Traverse für Tischgestellbreite Hauptschenkel von 134 cm zu 174 cm und Seitenschenkel
von 138 cm zu 178 cm ................................................................................................................................................ 36
3.6 Montage der Kufen ......................................................................................................................................................37
3.7 Montage der Traverse und Plattenträger ................................................................................................................... 37
3.8 Montage der Traversen und Plattenträger des angewinkelten Teils ........................................................................38
3.9 Montage des Halteblechs 135° ................................................................................................................................... 39
3.10 Montage der Plattenträger des angewinkelten Teils................................................................................................. 40
3.11 Montage der Blende ....................................................................................................................................................40
3.12 Montage des Abstandhalters .....................................................................................................................................41
3.13 Montage der Kabelhalterungen .................................................................................................................................41
3.14 Anschließen der elektrischen Bauteile.......................................................................................................................42
3.15 Verbinden des Verlängerungskabels .........................................................................................................................42
3.16 Montage der Tischplatte.............................................................................................................................................. 43
3.17 Montage der Steuerung unter der Tischplatte............................................................................................................ 43
3.18 Montage der Kabelclip................................................................................................................................................ 44
3.19 Sicherheitsabstand zur Wand oder beweglichen Teilen von 25 mm um die Tischplatte........................................ 44
3.20 Funktionstest ohne Tischplatte.....................................................................................................................................45
4 ERGONOMISCHE SITZEINSTELLUNG.....................................................................................................................46
5 TECHNISCHE DATEN........................................................................................................................................ 47-48
6 BETRIEBSHINWEISE.................................................................................................................................................49
6.1 Fehlfunktionen.........................................................................................................................................................49
7 FEHLERBEHEBUNG .................................................................................................................................................49
8 KUNDENDIENST .....................................................................................................................................................50
9 HERSTELLER ............................................................................................................................................................50
10 ENTSORGUNG .......................................................................................................................................................50
10.1 Außerbetriebnahme des Tischgestells........................................................................................................................ 50
10.2 Demontage des Tischgestells .....................................................................................................................................50
10.3 Recycling ......................................................................................................................................................................50
10.4 WEEE - Elektro und Elektronikgeräte-Abfall ................................................................................................................50
11 EG-KONFORMITÄTSERKLÄRUNG NACH MASCHINENRICHTLINIE 2006/42/EG, ANHANG II A.........................51

4
Nederlands
Inhoudsopgave
1ALGEMEEN............................................................................................................................................................ 52
1.1 Waarde van de montage- en gebruikershandleiding ..............................................................................................52
1.2 Beoogd gebruik............................................................................................................................................................52
1.3 Onjuist gebruik..............................................................................................................................................................52
1.4 Gevaar ..........................................................................................................................................................................52
1.5 Inhoud verpakking ................................................................................................................................................ 53-54
2VEILIGHEIDSINSTRUCTIES ..................................................................................................................................... 55
2.1 Verklaring van symbolen en instructies......................................................................................................................55
2.2 Gebruikte symbolen op het frame..............................................................................................................................55
2.3 Maximaal toegestaan gewicht op het frame ...........................................................................................................55
2.4 Maximaal toegestaan gewicht per kolom ................................................................................................................56
2.5 Organisatorische maatregelen ...................................................................................................................................56
2.6 Informele veiligheidsmaatregelen..............................................................................................................................56
2.7 Vereisten aan de monteurs .........................................................................................................................................56
2.8 Transport en montage..................................................................................................................................................56
2.9 Gebruik van het frame.................................................................................................................................................56
2.10 Specifieke gevaren ......................................................................................................................................................56
2.11 Instructies voor noodgevallen .....................................................................................................................................57
2.12 Onderhoud en instandhouding ...................................................................................................................................57
2.13 Reiniging........................................................................................................................................................................57
2.14 Overige risico’s .............................................................................................................................................................57
3MONTAGE ............................................................................................................................................................ 58
3.1 Controleren op volledigheid van levering .................................................................................................................58
3.2 Verpakking en verwijdering ........................................................................................................................................58
3.3 Draaimomenten van de gebruikte schroeven...........................................................................................................58
3.4 Voormontage van de dwarsbalken voor frame-opstelling van 114 cm en 124 cm voor de hoofdpoten en 118
cm en 128 cm voor de zijpoten...................................................................................................................................58
3.5 Voormontage van de dwarsbalken voor frame-opstelling van 134 cm om 174 cm voor de hoofdpoten en 138
cm om 178 cm voor de zijpoten .................................................................................................................................59
3.6 Montage van de voeten..............................................................................................................................................60
3.7 Montage van de crossbar en bladdrager .................................................................................................................60
3.8 Montage van de zij –unit Crossbars en bladdragers .................................................................................................61
3.9 Monteren van de vasthoudplaat 135° ........................................................................................................................62
3.10 Montage van de zij-unit bladdragers .........................................................................................................................63
3.11 Montage van de afdekkap .........................................................................................................................................63
3.12 Montage van de afstandhouders................................................................................................................................64
3.13 Montage van de kabelbinders....................................................................................................................................64
3.14 Aansluiten van de elektrische componenten............................................................................................................65
3.15 Het aansluiten van de verlengkabel ..........................................................................................................................65
3.16 Montage van het werkblad .........................................................................................................................................66
3.17 Montage van de handbediening................................................................................................................................66
3.18 Montage van de kabelclips.........................................................................................................................................67
3.19 Afstand van 25 mm tussen de muur of andere objecten en het werkblad .............................................................67
3.20 Frame test zonder werklad...........................................................................................................................................68
4 CORRECTE ZITPOSITIE .......................................................................................................................................... 69
5 TECHNISCHE SPECIFICATIES ...........................................................................................................................70-71
6 BEDIENING EN GEBRUIKSAANWIJZINGEN.......................................................................................................... 72
6.1 Gebruiksaanwijzingen ..................................................................................................................................... 72
7 PROBLEEMOPLOSSINGEN ................................................................................................................................... 72
8 KLANTENSERVICE ................................................................................................................................................. 73
9 FABRIKANT............................................................................................................................................................ 73
10 RECYCLING .......................................................................................................................................................... 73
10.1 Buitenbedrijfstelling van het frame..............................................................................................................................73
10.2 Demontage van het frame ..........................................................................................................................................73
10.3 Recycling ......................................................................................................................................................................73
10.4 AEEA - Afgedankte Elektrische en Elektronische Apparatuur .................................................................................73
11 EU-VERKLARING VAN OVEREENSTEMMING VOLGENS MACHINERICHTLIJN 2006/42/EG, BIJLAGE II A........ 74

5
Français
CONTENU
1GÉNÉRALITÉS ....................................................................................................................................................... 75
1.1 Valeur locale du manuel de montage/d'utilisation .................................................................................................75
1.2 Usage prévu .................................................................................................................................................................75
1.3 Mauvaise utilisation .....................................................................................................................................................75
1.4 Danger .........................................................................................................................................................................75
1.5 Contenu de la boîte .............................................................................................................................................. 76-77
2 INFORMATIONS RELATIVES À LA SÉCURITÉ ........................................................................................................ 78
2.1 Symboles/avertissements ...........................................................................................................................................78
2.2 Symboles utilisés sur le cadre de poste de travail ....................................................................................................78
2.3 Poids maximum autorisé sur le cadre .......................................................................................................................78
2.4 Poids maximum autorisé par colonne .......................................................................................................................79
2.5 Mesures d'organisation ...............................................................................................................................................79
2.6 Mesures de sécurité informelles .................................................................................................................................79
2.7 Note pour les personnes qui montent le poste de travail ........................................................................................79
2.8 Transport et montage ..................................................................................................................................................79
2.9 Utilisation du cadre du poste de travail .....................................................................................................................79
2.10 Dangers spécifiques ....................................................................................................................................................80
2.11 En cas d’urgence ........................................................................................................................................................80
2.12 Maintenance et entretien ...........................................................................................................................................80
2.13 Nettoyage ....................................................................................................................................................................80
2.14 Risques persistants .......................................................................................................................................................80
3MONTAGE ........................................................................................................................................................... 81
3.1 Montage des pieds .....................................................................................................................................................81
3.2 Emballage ....................................................................................................................................................................81
3.3 Couples de serrage des vis utilisées ..........................................................................................................................81
3.4 Prémontage des barres transversales pour la mise en place du cadre pour 114 cm et 124 cm pour le retour
principal et 118 cm et 128 cm pour le retour latéral ................................................................................................81
3.5 Prémontage des barres transversales pour la mise en place du cadre pour 134 cm et 174 cm pour le retour
principal et 138 cm et 178 cm pour le retour latéral ................................................................................................82
3.6 Montage des pieds .....................................................................................................................................................83
3.7 Montage de la barre transversale et du support supérieur .....................................................................................83
3.8 Montage de la barre transversale de retour latéral et du support supérieur .........................................................84
3.9 Montage de la plaque de retenue 135° ....................................................................................................................85
3.10 Montage du support supérieur de retour latéral .......................................................................................................86
3.11 Montage du couvercle ...............................................................................................................................................86
3.12 Montage des espaceurs .............................................................................................................................................87
3.13 Montage des clips de câble ......................................................................................................................................87
3.14 Connexion des composants électriques ...................................................................................................................88
3.15 Connexion du câble d’extension ..............................................................................................................................88
3.16 Montage du plateau ...................................................................................................................................................89
3.17 Montage de l’alimentation électrique sous le plateau ............................................................................................89
3.18 Montage du clips de câble ........................................................................................................................................90
3.19 Espace autour du mur et des pièces mobiles à 25 mm du plateau .......................................................................90
3.20 Essai du cadre sans plateau .......................................................................................................................................91
4 POSITION CORRECTE DES SIÈGES ....................................................................................................................... 92
5 SPÉCIFICATIONS TECHNIQUES ......................................................................................................................93-94
6 FONCTIONNEMENT ET INDICATEURS .................................................................................................................. 95
6.1 Indicateurs .....................................................................................................................................................95
7 DÉPANNAGE ....................................................................................................................................................... 95
8 SERVICE CLIENTÈLE ............................................................................................................................................. 96
9 FABRICANT .......................................................................................................................................................... 96
10 RECYCLAGE ........................................................................................................................................................ 96
10.1 Désactivation du poste de travail ..............................................................................................................................96
10.2 Démontage du poste de travail .................................................................................................................................96
10.3 Recyclage ...................................................................................................................................................................96
10.4 WEEE - Déchets d’équipements électriques et électroniques .................................................................................96
11 DÉCLARATION DE CONFORMITÉ CE AU SENS DE LA DIRECTIVE MACHINE 2006/42/CE, ANNEXE II A .......... 97

6
English
1 General
1.1 Local value of the assembly/Operating Manual
The guiding principle for safe use and trouble-free operation of this workstation frame is knowledge of
basic safety information and regulations. This assembly/operating manual contains the most important
information needed for assembling and operating the workstation frame safely. This assembly/
operating manual, in particular the safety information contained herein, must be observed by any
person building the frame and working on the finished surface. More importantly, the rules and regula-
tions applying to accident prevention in the locality in which the workstation frame is to be used must
be observed at all times.
1.2 Intended use
The workstation frame must be used only as a height-adjustable workstation for sitting/standing use in
offices or other enclosed areas. The frame must be used for this purpose only. Any other use than the
above shall be deemed improper. The manufacturer can in no way be held liable for damage arising
from improper use. This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and under-
stand the hazards involved. Children should be supervised to ensure that they do not play with the
appliance, cleaning and user maintenance shall not be made by children without supervision.
Intended use shall also include:
• Observation of all information from the assembly/operating manual and
• Prohibition of any sort of addition to/conversion of the workstation.
1.3 Improper use
• Never use the workstation frame to lift people or loads.
• Do not exceed the maximum load of the workstation frame.
• Operate workstation only with power supply unit which is included in delivery.
1.4 Danger
Improper connection of the workstation frame grounding conductor can result in a risk of electric
shock. Check with a qualified electrician if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product.
If the supply cord is damaged, it must be replaced by a special cord or assembly available from the
manufacturer or its service agent.
WARNING: Any changes or modifications not expressly approved by the manufacturer could
void the user’s authority to operate the equipment

7
1.5 Content Box
Assembly requires 2 people!
English
Items
3x
1
1x
8 2x
10
1x12
1x
1x
9
11
2x
2
4x
6
1x
5
8x
7
2x
4
2x
3
or or or
1x
13

8
English
Mounting Hardware Kit
Tools
M8
2x
N
6x
H
M8x60
10x
G
M8x50
12x
I
M6x16 4.5x20
6x
K4x
6x
A 8x
D
2x
B8x
C 2x
E
4.5x20
20x
M
16x
J
M10x35
2x
L
4.5x16
1x
F
8x
O
4x30

9
Example All weight should be distributed evenly.
2 Safety Information
2.1 Symbols/Warnings
The assembly/operating manual uses the following terms and signs to indicate dangers:
This symbol indicates an immediate threatening situation for any person’s life or health.
Failure to adhere to such information may have serious consequences for health, or
could even result in life-threatening injury or death.
This symbol indicates important information. Failure to adhere to such information
could lead to damage to the workstation.

2.2 Symbols used on the workstation frame
Do not place objects or parts of the body under the workstation frame or between
the cross members. This could cause serious injury or even result in death.
2.3 Maximum weight allowed on frame
Do not exceed the maximum permitted load of 150 kg (including table top) on the
workstation frame. Avoid unbalanced load, distribute the weight evenly, otherwise
overload may occur. Overloading a frame may cause breakage and close by indi-
viduals may suffer serious injuries as a consequence.
English
150 kg
>150 kg
150 kg

10
2.4 Maximum weight allowed per column
2.5 Organizational measures
• The workstation frame can best be assembled by two people. Turning the frame, once the work
surface has been fitted, is a task in particular which requires two people!
2.6 Informal safety measures
• Keep the assembly/operating manual in the place where the workstation frame is used at all times.
• Make sure that all safety information on the table (see Section 2.2, Symbols used on the work-
station frame) is legible, replacing the same if necessary.
2.7 Note for those assembling the workstation
• The workstation must be assembled/worked on by persons over the age of 16.
• The persons referred to above must have read and understood the assembly/operating manual.
2.8 Transport and assembly
• The workstation frame must be moved by two persons only, and in such cases must be retracted.
• Do not drag or pull the workstation frame over the floor.
• Assemble the workstation frame with the supplied tools only.
2.9 Use of the workstation frame
• Do not allow children to use the workstation frame unsupervised. Children may be unaware of the
dangers presented by the workstation frame. They would be in serious danger of injuring them-
selves, possibly even with fatal consequences. Further adjustment must then be impossible as a
safeguard against use by children.
• The workstation frame must only be used in appropriate areas.
• Do not use the workstation frame on an uneven surface. In such conditions it will not be steady.
• Never exceed the maximum load on the workstation frame.
2.10 Specific dangers
• When adjusting the height of the frame there is danger of injury. Make sure that there is no-one else
in the immediate surroundings of the frame.
• When assembling the workstation frame, make sure there is ample space to avoid collisions (i.e.
inclination of roof, fixed objects, filing cabinets, waste-paper bins etc.) in all imaginable directions.
• Make sure there is ample space to avoid collisions if there are objects on the work surface such as
computers or computer peripherals.
• Make sure there is clearance of at least 25 mm from all other furniture, all around the workstation
frame.
Do not exceed the maximum permitted load of 50 kg (including table top) on a col-
umn. Overloading a frame may cause breakage and close by individuals may suffer
serious injuries as a consequence.
English
50 kg

11
2.11 In an emergency
• Stop using the workstation frame at once if you notice anything unusual (strange sounds etc.).
• Have the workstation frame repaired by specialists. Refrain from using the workstation frame until it
has been successfully repaired.
2.12 Maintenance and upkeep
• The workstation frame and its components are low-maintenance items and need no special regu-
lar maintenance.
• Do not perform any repairs on the work surface or other components yourself.
• Do not alter the construction of the work surface or its frame.
• Any faulty components removed must be replaced with new, original components from the manu-
facturer. Use only original replacement parts made by the manufacturer. Have any such work car-
ried out by a specialist, making reference to this Assembly/operating manual.
2.13 Cleaning
• Always unplug this workstation from the electrical outlet before cleaning.
• Dust the workstation frame once a week with a dry cloth.
• Clean the workstation frame with a damp cloth and a weak solution of cleaner once a fortnight.
2.14 Persistent risks
This workstation frame has been built to the state of the art and to recognized safety regulations.
Nonetheless, its use may constitute a risk to the health and safety of users or third parties, damage to
the workstation frame or to other items. The workstation frame must be used only:
• for the purpose for which it was intended.
• if it is completely safe to do so.
English

12
English
7
7
5
Recommended Top Sizes
Width / size table top (Main
Return & Side Return)
Frame set-up
(Main Return)
Frame set-up
(Side Return)
Depth / size
table top
Table Top Thickness
133 cm 114 cm 118 cm 80 cm 2.5 cm
143 cm 124 cm 128 cm 80 cm 2.5 cm
3 Assembly
Before attempting assembly, read the safety information in Section 2.
 1
3.1 Checking the items supplied
• Carefully open the cardboard packaging.
• In doing so, do not use any long knife blades. They may damage the components inside.
• Check the parts supplied against the list in Section 1.6 Content box.
• Do not attempt to assemble the workstation frame if there is any damage or if there are any incor-
rect components.
3.2 Packaging
• Remove the packaging. Treat as household waste/paper.
• Observe national legislation.
3.3 Tightening torques for screws used
• Assemble the workstation frame with the tools supplied only.
3.4 Pre-assembly of the Crossbars for Frame set-up for 114 cm and 124 cm for Main Return
and 118 cm and 128 cm for Side Return
J
6
Adjust the frame into the desired width. Tighten the set screws on the crossbar with Allen
key M5.
Maximum Screw Torque : 10N-m

13
English
7
7
5
Recommended Top Sizes
Width / size table top (Main
Return & Side Return)
Frame set-up
(Main Return)
Frame set-up
(Side Return)
Depth / size
table top
Table Top Thickness
153 cm 134 cm 138 cm 80 cm 2.5 cm
163 cm 144 cm 148 cm 80 cm 2.5 cm
173 cm 154 cm 158 cm 80 cm 2.5 cm
183 cm 164 cm 168 cm 80 cm 2.5 cm
193 cm 174 cm 178 cm 80 cm 2.5 cm
203 cm 174 cm 178 cm 80 cm 2.5 cm
 2
3.5 Pre-assembly of the Crossbars for Frame set-up for 134 cm to 174 cm for
Main Return and 138 cm to 178 cm for Side Return
J
Do not yet tighten the set screws on the crossbars!
6

14
English
3.6 Mounting the Feet
3.7 Mounting the Crossbar and Top Support
 4
G
4
5
7
67
2x
4
1
1x
1
5
A
A
I
I
 3
Maximum Screw Torque : 10N-m
Maximum Screw Torque : 12N-m

15
English
3.8 Mounting the Side Return Crossbars and Top Support
2
 5
G
Maximum Screw Torque : 12N-m

16
English
3.9 Mounting the Retaining Plate 135°
 6
HH
9
10
8 N
Maximum Screw Torque : 12N-m

17
3.10 Mounting the Side Return Top Support
 7
 8
3.11 Mounting the Head Cover
3 H
E
E
G
English
Maximum Screw Torque : 12N-m

18
English
3.13 Mounting the Cable Clips
3.12 Mounting the Spacers
 9
 10
D
C
D

19
English
3.14 Connecting the Electrical Components
11
11
12
13
11
12
13
3.15 Connecting the Extension Cable
11
12
Connect the Extension Cable (#F) to the motor cable for
cable length extension.
F

20
3.16 Mounting the table top
3.17 Mounting the power supply underneath the table top
English
Keep in mind that the desk which you are assembling is height adjustable.
The cables of the electrical components must be able to freely follow the
movement of the desk.
17
Total 20x
M
Total 4x/6x
K
2x
K 4x
K
2x
K 2x K
2x
L
Total 8x
O Total 8x
O