HiB ACSSWHI01 User manual

13mm
344mm
440-460mm
*
1200N
～120kg
45mm
≥70mm
10
Shower Seat - Fitting Instructions
Installation Guideline
Care Instructions
• Using a suitable drill bit, drill holes in the marked positions to a suitable depth. If
drilling through tile, use a ceramic drill bit.
• Insert wall plugs level with the surface of the wall. If fitting to a tiled surface, wall
plugs should be inserted below the tile surface to avoid cracking. NB. For plaster-
board walls, specialist fixings should be purchased, available from any DIY or
hardware store.
• Fig.5 - Ensure the retaining grub screw is installed securely.
• Do not use abrasives or solvents when cleaning this product.
• Wipe off all water spillages as soon as possible using a so, damp cloth.
FI#10 016 R200622 Ver No.1.0 Oct 2020
WARNING
The wall mounted folding shower seat is designed to withstand a maximum vertical
static load of 120 kg, exceeding this loading limit may lead to permanent damage.
Please use the fixing kit included (Fischer DuoPower 10x50 wall plug and M8 screw) for
installation on concrete and solid brick walls. Other wall structures, such as aerated
concrete, perforated blocks or pre-wall mounting systems with plasterboard requires
special fixing kits. For plasterboard walls, specialist fixings must be purchased, available
from any DIY or hardware store or contact Product Support on [phone] for
more information.
ACSSWHI01

WARNING
The wall mounted folding shower seat is designed
to withstand a maximum vertical static load of
150 kg, exceeding this loading limit may lead
permanent damage. Please use the fixing kit
included (Fischer DuoPower 12x60 wall plug and
M10 screw) for installation on concrete and solid
brick walls. Other wall structures, such as aerated
concrete, perforated blocks or pre-wall mounting
systems with plasterboard requires special fixing
kits. For plasterboard walls, specialist fixings must
be purchased, available from any DIY or Hardware
store or contact Product Support on
[phone] for more information.
ACSSWHI02, ACSSDAG01
Shower Seats Maximum Loading Capacity
WARNING
The wall mounted folding shower seat is designed
to withstand a maximum vertical static load of
120 kg, exceeding this loading limit may lead
permanent damage. Please use the fixing kit
included (Fischer DuoPower 10x50 wall plug and
M8 screw) for installation on concrete and solid
brick walls. Other wall structures, such as aerated
concrete, perforated blocks or pre-wall mounting
systems with plasterboard requires special fixing
kits. For plasterboard walls, specialist fixings must
be purchased, available from any DIY or Hardware
store or contact Product Support on
[phone] for more information.
ACSSWHI01
T: [phone] F: [phone] E: [email protected] hib.co.uk
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN ©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent.
All sizes and measurements are approximate, but we do try and make sure they are as accurate as possible. In the interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.
kgkN
1.2 120
1.2 120
1.2 120
0.2 20
0.6 60
0.25 25
0.7 70
0.35 35
0.5 50

F2
Concrete > 20/25
Substrate
Wood Screw Diameter (mm)
Recommended loads in the respective base material
Solid Brick > Mz 12
Solid Sand-Lime Brick > KS 12
Aerated concrete > PB 2, PP 2 (G2)
Aerated concrete > PB 4, PP 4 (G4)
Vertically Perforated Brick > Hlz 12
Perforated Sand-Lime Brick > KSL 12
Gypsum Block
Gypsum Plasterboard 12.5mm
kgkN
1.5 150
1.3 130
1.5 150
0.24 24
1 100
0.35 35
0.75 75
0.5 50
- -
F2
Concrete > 20/25
Substrate
Wood Screw Diameter (mm)
Recommended loads in the respective base material
Solid Brick > Mz 12
Solid Sand-Lime Brick > KS 12
Aerated concrete > PB 2, PP 2 (G2)
Aerated concrete > PB 4, PP 4 (G4)
Vertically Perforated Brick > Hlz 12
Perforated Sand-Lime Brick > KSL 12
Gypsum Block
Gypsum Plasterboard 12.5mm
10