hib.co.uk 3
Prima & Duet Vanity Units
1. Position the unit in a suitable location.
Carefully mark the desired position of the unit
using a so pencil.
2. Using a spirit level, mark a horizontal line
below the pencil mark, taking into account
the location of the furniture hangers. Bend
and break the wall brackets as shown in
Fig. 1 and place brackets on the pencil line
paying attention to the distance between the
furniture hangers. Carefully mark the position
of the holes using a so pencil. (Fig. 2).
3. Before drilling, ensure there are no
hidden cables or pipes behind the
mounting points. Using a suitable drill bit,
drill holes in the marked positions to a suitable
depth.
4. Insert wall plugs level with the surface of the
wall. If fitting to a tiled surface, wall plugs
should be inserted below the tile surface to
avoid cracking. NB. For plasterboard walls,
specialist heavy duty fixings should be
purchased from any DIY or hardware store.
5. Fix the brackets to the wall using the screws
provided (Fig. 2).
6. Hang the furniture unit, ensuring the claws on
the hangers are securely located on the wall
brackets. Using a spirit level, make the unit
level by adjusting screw B on the hangers (Fig.
3). Once straight, tighten screw A until the
unit is secure against the wall.
7. If necessary, the drawer runners can be
adjusted in order to realign the drawer front(s)
(Fig. 7).
8. Lastly, mount the basin onto the furniture
unit using a fine bead of silicone to seal the
washbasin to the unit and wall edges.
Mirrored Cabinets
1. It is recommended that the door(s) are
removed from the mirrored cabinets prior to
installation for ease. Doors can be removed
by unclipping the hinges (there is a releaase
catch at the back of the hinge - see Fig. 6).
They can be reattached by reversing this
action and pushing the hinge back on to the
mounting plate until they click into place.
2. To install the mirrored cabinets, follow steps 1 to
6of the vanity unit installation process.
3. If necessary, the door(s) can be adjusted to align
them with the cabinet carcass. This is done by
adjusting the small screws on the hinges (see
Fig. 8)
Tall Units
1. Please note that the tall units can be
mounted as both right hand and le hand
door opening.
2. Position the unit in a suitable location. Carefully
mark the desired position of the unit using a so
pencil.
3. Using a spirit level, mark a horizontal line below
the pencil mark, taking into account the location
of the split baton style furniture hanger. Place
mounting baton on the pencil line and carefully
mark the position of the holes using a so
pencil. (Fig. 5).
4. Before drilling, ensure there are no
hidden cables or pipes behind the
mounting points. Using a suitable drill bit,
drill holes in the marked positions to a suitable
depth.
5. Insert wall plugs level with the surface of the
wall. If fitting to a tiled surface, wall plugs
should be inserted below the tile surface to
avoid cracking. NB. For plasterboard walls,
specialist heavy duty fixings should be
purchased from any DIY or hardware store.
6. Fix the mounting baton to the wall using the
screws provided (Fig. 5).
7. Hang the tall unit onto the wall baton, ensuring
that it is securely seated.
8. If necessary, the door(s) can be adjusted to align
them with the tall unit carcass. This is done by
adjusting the small screws on the hinges (see
Fig. 8).
9. In order to adjust the position of the shelves
(please note that the centre shelf is fixed and
not removable), the doors must first be removed
(see step 1 of the mirrored cabinet installation
process). Once the door is removed, simply
remove the shelf studs and reinsert them in the
required position. Replace doors.
