Hill Laboratories 90P User manual

R E F E R E N C E M A N U A L
Hill 90P
Podiatry Chair

Hill Laboratories Company has been making
quality a family business since 1945.
Your Hill Podiatry Chair is built in a tradition of
innovation and value that Hill Laboratories products
have become known for.
Our good name rests on the confidence that
your Hill Chair will provide you with solid, reliable service
for many years to come.
And welcome to the Hill Laboratories family
Congratulations!

Your Hill Laboratories Podiatry Chair has been thoroughly tested and inspected
before shipment. All parts are guaranteed against defect in materials for one full
year from date of purchase. During this period, any such defect will be remedied
by Hill Laboratories or by a factory-authorized repair service without charge.
Tables damaged by mishandling or accident will be
repaired at a reasonable charge.
All correspondence should be directed to your local dealer, or when this
is not possible, to Hill Laboratories directly.
We appreciate your business and your confidence in our product. Our aim is to
provide you with excellent service and satisfaction for many years to come.
President of Hill Laboratories Company
Table Serial Number_______________________________
The Hill Laboratories Guarantee
At Your Service

Ready for use.
2
Yo r Hill Podiatry comes ready to pl g into any 115 volt o tlet.
A justable
Hea piece
Adjusts in height 8”
Adjusts in length 12”
Curtain
Adjusts in height
Flexible
Arm Lamp
Standard with 110 outlet in base.
Removable when
not in use
A justable
Foot Section
Can be locked at
any angle down to 85°.
Also extends out 12” for
taller patients
Deep
A justable Pan
Slides out from under foot
section and adjusts in angle
Electric Foot Pe als
Adjust the height, tilt and recline
A justable
Height Base
Positions the
patient at just the
right height
Auto-Return Switch
Automatically repositions the
chair for the next patient
Fol -Down
Armrests
Fold back out of the
way when seating
the patient
Contour
Upholstery
For style and added
patient comfort
Specifications
Table Rating
500 lbs./Static Tested at 1000 lbs.
Height Range - 24"-37"
Standard Width - 24"
Length Reclined - 71", Extends to 79"
Table Base Skirting
Acrylic thermo-plastic
Foam
Ultra-Cell®for comfort and shape retention
Shipping Weight
Approximately 250 lbs
Electric Requirements
115 v~, 60 Hz., 10 A, where specified - 230 v~, 50 Hz.
Receptacles in base - 115 v~, 250 Watt maximum
Note: Grounding reliability can only be achieved
when the equipment is connected to an equivalent
receptacle marked hospital only or hospital grade.
There is no EMI concern related to the safe opera-
tion of this table.
Transportation and Storage Conditions
Ambient Temperature Range:
-30°C to +60°C (-22°F to 140°F)
Relative Humi ity
0% to 90% (non-condensing)

Table Care
Your Hill Table comes upholstered in a highly durable vinyl material. Its appearance is guarded by Prefixx™
brand protective finish. Your upholstery may be cleaned with the Hill Laboratories Vinyl Cleaner or any non-
abrasive household detergent without change to surface luster. Stubborn stains can be cleaned with most
common solvent cleaners such as naphtha (lighter fluid), rubbing alcohol (IPA type), toluene, Coleman
gas, turpentine (paint thinner), and nail polish remover (50/50 mixture of acetone and water) with no change
to surface luster or color. One hundred percent acetone can also be used for short periods but it is sug-
gested that it first be tested on an inconspicuous area of the table.
Caution: These solvents are highly flammable; exercise proper care when cleaning with these materials and
do not use near open flame or intense heat. Wear rubber gloves during all cleaning activities. When clean-
ing other parts of your table (besides upholstery) use only nonabrasive household detergents and water.
Caution: Be sure to unplug your table before performing any maintenance on the table.
Caution: The table should be checked once a year to make sure all internal and external bolts are secure.
Caution: The table should be in its lowest height position when not attended.
Caution: In case of power outage, the table will rely on the generator back-up of the facility where the table
is installed for powering the table to its lowest position.
Caution: The power cord shall be located to avoid objects being rolled over or placed on top of it and also to
avoid people tripping over it. Damaged cords should be replaced with another of hospital grade.
Caution:
Grounding reliability can only be achieved when the equipment is connected to an
equivalent receptacle marked hospital only or hospital grade.
Special Caution:
To avoi injury or amage to the chair, NEVER SIT OR LEAN ON THE FOOT
SECTION WHEN IT IS RAISED TO THE HORIZONTAL POSITION. The foot section
is designed to support a seated patient’s feet and lower legs only. To prevent any
problem from occuring, adjust the foot section down before a patient exits the chair.
Symbols: - Each of the symbols below are use on your Hill mo el
labeling. An explanation of each is below.
Cleaning Your Table
Cautions an Symbol Explanation
3
~
Attention Symbol
consult accompanying
documents
Dangerous Voltage
Symbol
Type BF Applie
Part Symbol
Groun
Symbol
Alternating Current
Symbol

Table Features
A justable Hea piece
The adjusting headpiece can be moved in both
the forward-backward direction and up-down.
To adjust the forward position of the headpiece,
loosen the black knob directly behind the head
cushion (“A”, photo 1) and adjust the cushion
position. Then, retighten the knob. Repeat the
same procedure for the up and down adjustment
(“B”, Photo 1). Rated at 20 pounds and tested
with 160 pounds.
Fol -Down Armrests
When the fold-down armrests are posi-
tioned in the normal position (as shown in
Photo 2), they can be easily folded back
by simply lifting from the bottom until the
armrests are parallel with the back seat
cushion as shown in Photo 3. Rated at
10 pounds and tested with 80 pounds.
Auto-Return Feature
The Auto-Return feature safely and conveniently returns
the table to starting position by pressing the Auto-
Return button on the right side of the foot pedal control
panel (see Photo 4). Tap any pedal to stop auto-return.
IMPORTANT: Safety switches are located so that the
automatic return motion will stop immediately should
any object or person touch the cover of the base during
the auto-return process.
Photo 1
Photo 3
Photo 4
4
A
B
Photo 2

Gooseneck Lamp with Receptacle
To use the optional Gooseneck Lamp, insert the post into the
mounted receiver and tighted the knob, turning clockwise. The
lamp plugs into the 120 Volt, 5 amp. rated receptacle located
at the head-end of the chair, in the center of the table frame.
Be careful to position the lamp wire so that it does not inter-
fere with free movement around the chair.
Table Features
Stainless Steel Pan
A stainless steel slide-o t tray is positioned by simply
p lling the tray frame forward to the desired position.
The tray itself is f lly removable for easy cleaning.
Foot Pe als
Up to three foot pedals mounted together on one control.
The far left pedal, marked Back, controls the angle of the
back cushion. The middle-left pedal, labeled Tilt, controls
the tilt angle of the seat cushion (Caution: The lift back
cushion needs to be tilted up a minimum of 15° to tilt the
table into the trendelenburg position. To avoid injury or damage, the lift back should not be
operated without the flat plastic panel in place on top of the plastic enclosure.) The middle-
right pedal, marked Height, controls table elevation of the chair.
5
Fol -Down Foot Section
The angle of the Fold-Down Foot Section is controlled by
a manual switch located under the left side as you face
the end of the chair (see photo). Press and hold the
switch to freely adjust the angle of the cushion. Release
to lock the cushion in place.
Switch
Photo 9

Table Features
Table Features
6
Curtain (optional)
The curtain installs into a receiver on the side of the seat
cushion. The curtain height is adjustable and locks in place
by turning the locking knob on the receiver.
Leveling Feet
The HA90P is equipped with leveling feet under each corner
of the chair’s base. The leveling feet can be adjusted in
height individually by turning the bolt directly above the foot
with a wrench—clockwise for lower height; counter-clock-
wise for higher.
Casters
If your Hill model is equipped with the optional caster
system, they are located on each end of the base.
When not in use, the black handles rest in the down
position (as seen in the top photo, left). To engage the
casters, use your foot or hand to lift the black handles
into the up position on both ends of the base (pictured
in the bottom-left). This will engage the caster wheels
and lift the table about 1/2” for easy movement.
Be careful to to isengage the casters before
using the table for treatment.

Diagrams
7




  
 RU  

H[WHQG





ZLWKEDFNDW



32',$75<'LPHQVLRQV
+HLJKW5DQJH

Wiring Diagrams
8
No Auto-Return Configuration, Part 1

Wiring Diagrams
9
No Auto-Return Configuration, Part 2

Wiring Diagrams
10
Auto-Return Configuration, Part 1

Wiring Diagrams
11
Auto-Return Configuration, Part 2

90D Dermatology
Chair
Podiatry Model
90MD
HA90E
PT Tilting
90C
Mat Table
HA90 Lift Back
HA90
Anatomotor
Massage w/Traction
Tables Manufactured by Hill Laboratories
Air90C
Hi-Lo
Air-Flex
w/4 Drops
HA90V Tilt
Vascular/Diagnostic
Rath Mechanical
Mc enzie Technique
PT Mobilization
Repex Table
Mc enzie Technique
Counterstrain
(multi-positional)
90W Wound Care Chair
Neck Correct™
Cervical Spine Rehab

P.O. B x 2028, 3 Bact n Hill R ad, Frazer, PA 19355 • ph ne 1-877-445-5020 • 610-644-2867 • fax [phone] • www.hilllabs.c m