Hillrom Liko 190117 User manual

190117 rev. 3
Fixed kit 4
Assembly Instruction
(EN)
190282 - Front Page rev. 3
(C)2019. Liko R&D AB. All Rights Reserved.
Shall be assembled by personnel authorized by Hill-Rom! ENG
Skall monteras av personal som auktoriserats av Hill-Rom! SE
Skal monteres af personale, der er autoriseret af Hill-Rom! DK
Монтаж оборудования должен выполняться только специалистами, уполномоченными
компанией Hill-Rom. RU
Tämän saa asentaa vain Hill-Romin valtuuteu henkilökunta! FI
Le montage doit être réalisé par du personnel agréé par Hill-Rom ! FR
Muss von durch Hill-Rom autorisiertes Personal zusammengebaut und monert werden! DE
Sarà montato dal personale autorizzato da Hill-Rom! IT
組立はHill-Rom認定の要員によるものとします。 JP
应当由获得Hill-Rom授权的人员组装！ ZH-S
Moet worden samengesteld door door Hill-Rom geautoriseerd personeel! NL
Skal monteres av personale som er autorisert av Hill-Rom! NO
Solo el personal autorizado por Hill-Rom debe realizar el montaje. ES

1
Fixed kit 4
Assembly Instrucon
Prod. No 3308860
Contains:
X 1
Fits:
Assembly A, page 1-2.
Prod. No. 3156057, FlexoStretch
Prod. No. 3156051, LikoStretch™ 1900 accessory
Prod. No. 3156056, OctoStretch™ accessory with Stretch Leveller
Assembly B, page 3-4.
Prod. No. 3156065, LikoStretch™ Mod 600 IC accessory
Prod. No. 3156065B, LikoStretch™ Mod 600 IC accessory
Prod. No. 3156055, OctoStretch™ accessory
Prod. No. 3156021, Sling Cross-Bar 450
Prod. No. 3156018, Sling Cross-Bar 670
Prod. No. 3156005, SlingBar Mini 220
Assembly C, page 5-6.
Prod. No. 3156077, Universal TwinBar 670
X 1
X 1
Assembly A
Prod. No. 3156057, FlexoStretch
Prod. No. 3156051, LikoStretch™ 1900 accessory
Prod. No. 3156056, OctoStretch™ accessory with Stretch Leveller
1. Remove and put exisng screw and nut away.
X 1 17 mm
7EN121212 Rev.3
ENGLISH
X 1 Allen key 6 mm
Tools required:
X 2 torx T25
Shall be assembled by personnel authorized by Hill-Rom!
Symbol Descripon
WARNING!
Failure to follow the instrucons may lead to serious injury to the paent or caregiver.
Symbol descripon
X 1 13 mm

Fixed kit 4 • 7EN121212 Rev. 3 www.hill-rom.com I www.liko.com
2
2. Only use the suplied screw and locking nut.
3.
8.7.
4. 5. 6.
NOTE! Make sure the screw pass through the locking nut.
WARNING! Safety crical assembly!
WARNING! Safety crical assembly!
NOTE! Carefully ghten the screws so
the plasc cover will not damage.

Fixed kit 4 • 7EN121212 Rev. 3 www.hill-rom.com I www.liko.com
3
Assembly B
Prod. No. 3156065, LikoStretch™ Mod 600 IC accessory
Prod. No. 3156065B, LikoStretch™ Mod 600 IC accessory
Prod. No. 3156055, OctoStretch™ accessory
Prod. No. 3156021, Sling Cross-Bar 450
Prod. No. 3156018, Sling Cross-Bar 670
Prod. No. 3156005, SlingBar Mini 220
1. Remove and put exisng bolt and nut away.
2. Only use the suplied bolt and locking nut
NOTE! Make sure the screw pass through the locking nut.
3. 4. 5. 6.
WARNING! Safety crical assembly!

Fixed kit 4 • 7EN121212 Rev. 3 www.hill-rom.com I www.liko.com
4
7.
8.
WARNING! Safety crical assembly!
NOTE! Carefully ghten the screws so
the plasc cover will not damage.

Fixed kit 4 • 7EN121212 Rev. 3 www.hill-rom.com I www.liko.com
5
4. 5. 6. 7.
Assembly C
Prod. No. 3156077, Universal TwinBar 670
2.
1. Remove and put exisng bolt and nut away.
3. Only use the supplied bolt and locking nut
NOTE! Make sure the screw pass
through the locking nut.
WARNING! Safety crical assembly!

6
8.
9.
Liko AB
Nedre vägen 100
SE-975 92 Luleå, Sweden
www.hill-rom.com I www.liko.com
© Copyright Liko R&D AB 2019
WARNING! Safety crical assembly!
NOTE! Carefully ghten the screws so
the plasc cover will not damage.