Hilti PR 30-HVS User manual

PR 30-HVS I Quick Guide I 2014 1
www.hilti.com.au
Shock-Mode Deactivation:
PR 30-HVS Quick Guide –Functions
PRA 30 Settings
Slow
beeping Solid beep Fast
beeping
Press ON/OFF
Wait for Laser
1. Press ON/OFF 3. Press Shock-Mode button to
deactivate Shock-Mode
4. LED indicates Shock-Mode is
deactivated
2. Shock-Mode activates
automatically after 2 minutes
Basic Application
3. If rotator is bumped, laser
stops rotating and all LEDs
activate
Press Volume Key to
change Volume
(normal/loud/off/low)
Press Unit Key to
change units (mm/cm)
Pairing: All tools sent out paired - Pairing
only for new receiver!
1. Press and hold ON/OFF on both
PR 30-HVS and PRA 30 for three
seconds
2. LEDs blink, PRA beeps, Icon appears

PR 30-HVS I Quick Guide I 2014 2
www.hilti.com.au
A
B
PR 30-HVS Quick Guide –Vertical Alignment
1. Press ON/OFF
2. Wait for Laser
& align to point A
B
1. Press ON/OFF
2. Press Auto
Alignment (2x)
Wait for alignment
Surveillance Mode starts
automatically after Auto
Alignment. PRA 30 has
to stay at Point B
Optional: To deactivate
Surveillance Mode press
Auto Alignment key (2x).
2x
A
1. Press ON/OFF
2. Wait for Laser
& align to point A
1. Press ON/OFF
2. Press Left/ Right key
to align laser plane to
point B
A
Vertical Manual Alignment
Vertical Auto Alignment

PR 30-HVS I Quick Guide I 2014 3
www.hilti.com.au
PR 30-HVS Quick Guide –Slopes
2. Press
ON/OFF
3. Press Slope
Mode key
2. Press e-
Targeting key
1. Set Slope as
shown above
3. Position PRA 30
When tool is aligned,
press e-Targeting key to
exit and start working
with set slope.
Move PRA 30 on leveling
staff to reference level next
to rotator & fix it.
Position the leveling staff
to desired end point of
slope and double click the
auto-align key on PRA 30.
(2x)
Optional (for accurate direction):
Turn tool according to LED arrow
1. Use the target
to aim & align
tool to the
desired slope
Slope e-Targeting
1. Use the target
to aim & align
tool to the slope
2. Press
ON/OFF
3. Press Slope
Mode key
Setting Slopes
4. Use + / - keys
to set the desired
inclination
Determining Slopes
* Read the operating instructions before the tool is used for the first time