Hisense AVC-05URCSAB Instruction Manual

4-Way
Cassette
Power
Source
220-240V
/50HZ
220V
/60HZ
AVC-05URCSAB
AVC-07URCSAB
AVC-09URCSAB
AVC-12URCSAB
AVC-14URCSAB
AVC-17URCSAB
Type
P00982Q
ORIGINAL INSTRUCTIONS
Compact
AVC-07UR2SAB
AVC-09UR2SAB
AVC-12UR2SAB
AVC-14UR2SAB
AVC-17UR2SAB
1080677

Declaration of Conformity 
(Manufacturer’s Declaration)
Hisense Corporation ,
17, Donghai Xi Road, Qingdao 266071,P.R. China
declares under its sole responsibility that the air conditioning models to
which this declaration relates:
AVC-05URCSAB, AVC-07URCSAB, AVC-09URCSAB, AVC-12URCSAB,
AVC-14URCSAB, AVC-17URCSAB,
are in conformity with the following standard(s) or other normative document(s), provided that these
are used in accordance with our instructions:
EN 60335-1
EN 60335-2-40
EN 62233
EN 55014-1
EN 61000-3-2
EN 61000-3-3
EN 55014-2
following the provisions of: 2006/42/EC
2012/19/EU
2011/65/EU
Directives, as amended.
Manufacturing number and manufacturing year: refer to model Nameplate.
Notes:
This declaration becomes invalid, if technical or operational modifications are introduced
without the manufacturers consent.
Hisense Italia S.r.l. is authorised to Compile the Technical Construction File.
Ad. : Via Montefeltro 6A, 20156 Milano.
Name, Surname :
Position/ Title : Director
 Date :Aug. 15,2016
2014/30/EU

Hisense
Hisense
Hisense

Hisense's
Hisense's
IMPORTANT NOTICE
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.

6
6
6
6
7
6
6
6
9
8
7
13
13
13
14
Section2 Installation & Maintenance Manual

15
15
15
16
16
17
17
17
18
7.3 Fan Motor Speed-up Setting(SHi)

17140907 12
Compact 4-Way Cassette Type
×10 Btu/h
3
O
O
O
The appliance is not to be used by children or
person with reduced physical, sensory or mental
capabilities,or lack of experience and knowledge,
Children should be supervised that they do not
play with the appliance.
The appliance should not be installed in the
laundry.
unless they have been given supervision or
instruction concerning use of the appliance by a
person responsible for their safety.
05

Regarding the instructions of Wired Remote
Control Switch or Wireless Remote Control
Switch,read the operation manual attached
to the control switch.

7
7.1
four clips

clips
8.2
8.3
8.4
8
7.2
7.3
clips
clips

6
R410A
* To avoid damageto the resin covers,before
lifting or movingthe indoor unit,put a cloth
on the resincovers.
21 Wrench

7
2.5
8
8
(12ID)
(25ID)

8
2.5
285mm
Setting so that uniform air distribution is available.
Fan Motor Speed-up

9
140
196

10
is in the packing
carton of indoor unit.Take it and do not fold it.
Use it to decide an installation location and
direction of the unit.
for suspension bolts with a pencil.
(2) Press the Pattern Board tightly onto the
surface of the roof, draw out the hole position
follow the same direction of suspension bolts.
(3) Cut an opening on the ceiling board with
assistance of the Pattern Board, make sure to
15 to 20 15 to 20
15 to 20
15 to 20
12
5
(1) Removing Air Intake Grille from Air Panel
Fig. 4.9 Removing Method of Air Intake Grille
Step 1
Open the air intake grille to an angle of approximately 45o
from the surface of the air panel as shown in Fig. 4.9.
Step 2
Lift the grille keeping it inclined.
Step 3
Draw the grille towards the open space after lifting.
* Do not touch the air louver during installation work.
* Do not try to remove the grille while it is at an angle of 90o
from the surface of the air panel.
NOTE
Air Panel
Air Intake Grille
* Slide the knobs toward the allow direction.
Knob
45o
Use the Pattern Board

(2) Installing Air Panel
Step 1
Set the corner of the electrical box of the indoor unit to
the position
Step 2
Mount the air panel onto the air panel fixing position by using
the factory-supplied fixing screws
Electrical
x
of wireless receiver corner of the air panel.
(M5 screws).
fixing position
fixing position
wireless
receiver
corner
Air Panel
Four fixing positions will be seen after removing air
intake grille from air panel.
Screw(Q'ty 4)
Air Panel
Indoor Unit
Bo
corner
wireless
receiver
(factory-supplied
in air panel)
Motor Wiring for Auto Louver
(Onthepanel Side)
(5-Pole Connector)
Wireless Receiver Wiring
(Onthepanel Side)
Motor Wiring for Auto Louver
(OntheUnit Side)
(5-Pole Connector)
(OntheUnit Side)
(10-Pole Connector)
(10-Pole Connector)
Step 3
Check to ensure that there is no gap around the contacting
surface between the indoor unit and the air panel. Any gap
may cause air leakage or dewing.
* Significant height adjustment will cause of dewing
from the drain pan and lead to the limit switch failure.
lDo not turn the air louver by hand.
If moved, the louver mechanism would be damaged.
Air Leakage
Smudge
Dewing

Louver
Do Not Touch
lIf the screws are tightened insuficiently, it may
cause of the failure.
lWhen there is still the gap even after tightening the
screws firmly enough, readjust the height of the
indoor unit.
lThe indoor unit height is adjustable by adjusting the
nut of suspension bolts for indoor unit .
Step 4
The Motor Wiring for Auto Louver and Wireless Receiver
Wiring on the Panel Side and the Unit Side is shown in
Fig.4.10. Connect them carefully.
Fig.4.10 Installing Air Panel
Wireless Receiver Wiring
Before electrical wiring work, turn OFF the power source.
If the connectors are connected without turning OFF the
power source, the auto-swing louver can not activate.
Then attach the air intake grille.This panel is available
to be installed from any 4 directions by rotating the air
intake grille.
Wiring Connection for Air Panel
11
Otherwise wiring between indoor unit and air panel can
not be connected.
Wired Remote Control Switch and Wireless Remote Control
Switch can not be used simultaneously .If Wired Remote
Control Switch is connected ,Disconnect Wireless Receiver
Wiring on the Panel Side and the Unit Side.

Check the wiring connections securely after wiring work.
If some problems are existing at the wiring connections,
it may cause a fire.
Fix the cables near the wiring connections securely, if
not, it may cause a fire. Protect the wires or etc. from
rats or other animals. If not protected, rats may gnaw at
unprotected parts and at the worst, a fire will occur.
(3)Test Run of Air Panel
1) After completing the installation of the air panel, perform
the test run according to the “Installation & Maintenance
Manual” attached with outdoor unit.
2) Check the swing louvers’ operating conditions during the
test run.
The swing louvers are operated automatically. Never
move the swing louver by hand.
(When Swinging)
The mark " "
moves continuously.
(When in Fixed Position)
The mark " "
indicates the position
oflouvers.
* Press the ”SWING LOUVER” switch on the remote control
switch.
* Every time pressing the switch, the horizontal deflectors
repeat swing and stop. The deflectors’ positions are shown
on the “SWING LOUVER” indicator on the remote control
switch LCD.
1) The adequate air flow direction may be different depending
on the conditions such as:
• Air Conditioner’s Installation Position
• Room Structure
•Furniture Layout
If satisfied cooling/heating condition is not obtained, adjust
the air flow direction.
2) Perform the louver position setting with observing the
“SWING LOUVER” Indicator on the remote control switch.
(Louver position does not indicate the actual louver
operating position.)
3) SWING LOUVER
Even if the “SWING LOUVER” switch is pressed, the
louvers may not stop immediately and move up to one
swing at a maximum.
4) If cooling operation is performed under the condition with
over 80% humidity, dew condensation may occur at the
panel or the louvers.
NOTE
12