Hisense HAWC09D User manual

hisense HAWC09D Window (Room) Air Conditioner User Manual
http://www.manuallib.com/file/2617540
From ManualLib.com
ManualLib.com collects and classifies the global product
instrunction manuals to help users access anytime and
anywhere, helping users make better use of products.
Home: http://www.manuallib.com/ Chinese: http://www.shuomingshuku.com/
This Manual: http://www.manuallib.com/file/2617540

SWINGSWING
OFFON/
MODE
TIMER
FAN
SPEED
F
HR
Window (Room) Air Conditioner
User Manual
HAWC09D
Thank you very much for purchasing a air conditioner, please
read this User and Care Manual carefully before installing and using this
appliance, keep this manual for future reference.
This Manual: http://www.manuallib.com/file/2617540

1
2
4
CONTENTS
Part Names
Operating Instructions
Care and Maintenance
Caution for Operation and Trouble Shooting
7
8
Installation Instructions 9
This Manual: http://www.manuallib.com/file/2617540

Outside Air Outlet
Drainage Tip
Back View
2
Exterior Air Inlet
Fig. 1
Fig. 2
Front View
Note:
The figures in this manual are based on the external view of a standard model.
Consequently, the shape may differ from that of the air conditioner you have selected.
Air Outlet
Control Panel
Power Cord
Interior
Air Inlet
Grille
Horizontal Air Vane
Vertical Air Vane
Fresh air lever
Exterior Air Inlet
Exterior Air Inlet
Remote Controller
SWING
OFF
ON/
MODE
TIMER
FAN
SPEED
F
HR
Part Names
This Manual: http://www.manuallib.com/file/2617540

1. Control Panel
2. Vent Lever
3
Fresh air lever Shut the fresh air door to
achieve the best cooling
effect and open it to
introduce fresh air into
the room if the air is foul
inside.
Fresh air
vent closes
Fresh air
vent opens
Electrical Models:
SWING
OFFON/
MODE
TIMER
FAN
SPEED
C
HR
Air Filter handle
SWING
OFF
ON/
MODE
TIMER
FAN
SPEED
F
HR
Parts Name
Control Panel and Vent Lever
This Manual: http://www.manuallib.com/file/2617540

4
MODE Button
Each time the MODE button is pressed, the operation
mode is changed in sequence:
COOLING FAN ONLY ENERGY SAVING COOLING
NOTE: After setting a mode, allow 3
minutes before switching to another mode.
NOTE: The temperature setting range is from 19 (66 ) to 31 (88 ).
FAN SPEED Button
Used to select the fan speed in sequence: auto low
medium high.
SWING Button
Used to start or stop the vertical air vanes.
TIMER Button
Used to set or cancel a timer operation.
When the unit is in operation, you can set the OFF TIMER.
When the unit is off, you can set the ON TIMER.
Timer setting range is 0 to 24 hours.
If the OFF TIMER is set, the timer LED displays
the remaining operating time for only 12 seconds,
the display then reverts to displaying the set temperature.
If the ON TIMER is set, the timer LED displays
the remaining time to left until turn on.
If you want to cancel the ON TIMER, press the TIMER
button again.
Used to set the room temperature in COOLING mode or the time in TIMER mode.
ON/OFF Button
The air conditioner will start operation or will stop operation
when this button is pressed.
You can easily operate this air conditioner by pressing
the relevant button on the control panel as well as the
remote controller.
Indication symbols on the LED control panel:
High fan speed
Medium fan speed
Low fan speed
Auto fan speed Cooling
Fan only Display set temp
Display set timer
Timer
The above LED symbol lights when the relevant mode is in use.
Energy-saving
Buttons
Control Panel
SWING
OFFON/
MODE
TIMER
FAN
SPEED
F
HR
C
C
HR
Operating Instructions
This Manual: http://www.manuallib.com/file/2617540

Power
Mode
+
_
Temp/Time
Auto
Power Saver
Mid
High Low
Timer
Fan Speed
The remote controller transmits signals to the system.
5
1
1
2
3
8
2
3
5
6
8
Buttons
POWER Button
MODE Button
TIMER Button
The air conditioner will start operation or
will stop operation when this button is
pressed.
Used to select the mode.
Used to set or cancel a timer operation..
Remote Controller
4HIGH Button
Used to select mode.high fan speed
5MID Button
Used to select medium mode.fan speed
6LOW Button
Used to select Low mode.fan speed
7AUTO Button
Used to select the Auto mode.fan speed
9POWER SAVE Button
Used to select the mode.Energy-saving
When changing modes during operation, the unit will not respond instantly. Please wait 3 minutes.
Wait 3 minutes before restarting the appliance.
4
7
9
Used to set the room temperature in COOLING
mode or the time in TIMER mode.
Used to start or stop the vertical air vanes.
10
Swing
10
SWING Button
Operating Instructions
This Manual: http://www.manuallib.com/file/2617540

Remote Sensor
Remote Control
How to Insert the Batteries
Remove the battery cover according to the arrow direction.
Insert new batteries making sure that the (+) and (-) of the
battery are matched correctly.
Re attach the cover by sliding it back into position.
Note:
Use 2 LR6 AA(1.5volt) batteries. Do not use rechargeable batteries. Re-
place batteries with new ones of the same type when the operation becomes
erratic. If the replacement is done within 1 minute, the remote control will keep
its original presets.
How to Use
To operate the room air conditioner , aim the remote control
at the remote sensor.
The remote control will operate the air conditioner at a dis-
tance of up to 23 feet when pointed at the remote sensor on the
main unit.
SWING
OFF
ON/
MODE
TIMER
FAN
SPEED
F
HR
HR
Operating Instructions
6
This Manual: http://www.manuallib.com/file/2617540

When servicing the air conditioner, be sure to
turn the mode switch to the "OFF" position and
disconnect the power cord from the electrical outlet.
1. DO NOT use gasoline, benzine, thinner or
other chemicals on the air conditioner as these
substances may cause damage to the paint finish
and deformation of plastic parts.
2. Never attempt to pour water directly to the
front of the unit as this will cause deterioration of
the electrical insulation.
Cleaning the Air Filter
If the air filter becomes clogged with dust, air-flow
is obstructed and efficiency is reduced. The air filter
should be cleaned once a month. More frequent
cleaning may be necessary depending on outdoor
and indoor air quality.
Air Filter Removal:
The air filter on the above model is located
behind the air intake front grill.
To remove the air filter, grasp the filter handle(tab)
located on the right (center) side of the air inlet grille
and slide the air filter to the right.
To reinstall the air filter, reverse the above
procedure.
DO NOT forget to install the air filter. If the air
conditioner is left to operate without the air filter,
dust is not removed from the room and may
cause your air conditioner to fail.
When the air filter inlet grill and cabinet are dirty,
wipe with lukewarm water (below 40 C). Use of
mild detergent is recommended.
Cleaning the Air Filter
1. Remove dust clogged in the filter by
tapping it or vacuum clean it.
2. Wash the filter well with lukewarm water below
40 C while rubbing lightly: To get better
results, wash it with soapy water or a neutral
cleaning agent.
3. Rinse the filter well using clean water then
dry completely.
End-of-Season Care
1. Operate the fan alone for half a day to dry out
the inside of the unit.
2. Turn the power off and remove the plug from the
wall socket.
3. Clean the filter.
4. Store in a dry location.
CAUTION
! !
Care and Maintenance
7
This Manual: http://www.manuallib.com/file/2617540

6. The air conditioner is safe when ambient static pressure is 0.8~1.05 standard atmosphere pressure.
5. When the relative room humidity is over 80% and the doors or windows are open, dew will form
around the indoor air outlet during extended COOLING use.
4. Temperature range
The air conditioner will not operate in the following operation mode and ambient temperature:
Power supply voltage should be at the range of 10% rated voltage, otherwise the appliance will not
operate normally or the fuse will be blown.
3. Power supply
2. A specified fuse should be employed in the power source circuit for fear the appliance be damaged.
1. Wait for three minutes before restarting the air conditioner.
COOLING Outdoor temperature is over 43
Indoor temperature is below 21
Before asking for service, please check the appliance according to the following items.
The appliance will not be operate
Check if the power supply is connected correctly.
Check if the appliance restarts less than three minutes after it was switched off, in this case the
overload protector of the compressor may trigger.
Check if the power supply is wrong or the voltage is too low or too high.
Cooling is not effective
Check if any window or door is open. Close all of the windows and doors to achieve the best
cooling effect.
Check if sunlight is penetrating into the room directly through an open curtain.
Check if the appropriate temperature is set. Set the temperature according to the room temperature.
Check if the air filter is clogged, this will cause frosting up of the evaporator, first, clean the air filter,
and then allow airflow in until the frost is melted.
Check if the fuse is blown or the breaker trips.
Caution for Operation
Trouble Shooting
Caution for Operation and Trouble Shooting
8
This Manual: http://www.manuallib.com/file/2617540