Hisense AVY-07UXJSJA Instruction Manual

AVY-24UXJSKA
AVY-18UXJSKA
AVY-14UXJSJA
AVY-12UXJSJA
AVY-09UXJSJA
AVY-07UXJSJA
P01135Q
ORIGINAL INSTRUCTIONS
1-Way
Cassette
Type

Declaration of Conformity
(Manufacturer’s Declaration)
which this declaration relates:
AVY-07UXJSJA,AVY-09UXJSJA,AVY-12UXJSJA,AVY-14UXJSJA,
AVY-18UXJSKA,AVY-24UXJSKA
are in conformity with the following standard(s) or other normative document(s), provided that these
are used in accordance with our instructions:
EN 60335-1
EN 60335-2-40
EN 62233
EN 55014-1
EN 61000-3-2
EN 61000-3-3
EN 55014-2
following the provisions of:
2006/42/EC
2014/30/EU
2012/19/EU
2011/65/EU
Directives, as amended.
Manufacturing number and manufacturing year: refer to model Nameplate.
Notes:
This declaration becomes invalid, if technical or operational modifications are introduced
without the manufacturers consent.
Hisense Italia S.r.l. is authorised to Compile the Technical Construction File.
Ad. : Via Montefeltro 6A, 20156 Milano.
Name, Surname :
Position/ Title : Director
Date : January 09,2017
Qingdao Hisense Hitachi Air-conditioning Systems Co., Ltd.
Add: 218, Qianwangang Road, Economic & Technical Development Zone, Qingdao, P.R. China
declares under its sole responsibility that the air conditioning models to

Hisense
Hisense
Hisense

Hisense's
Hisense's
IMPORTANT NOTICE
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.

6
6
6
6
7
6
6
6
9
8
7
11
11
11
12
Section2 Installation & Maintenance Manual

13
13
13
14
15
15
15
16

241814090712
1-Way Cassette Type
×10 Btu/h
3
l
l
l
The appliance is not to be used by children or
person with reduced physical, sensory or mental
capabilities,or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised that they do not play
with the appliance.
The appliance should not be installed in the laundry.

3. Rem。ec。ntrol Switch

  
  

   
  



陪   
  °
   c.

用 「 陪

 

「阳 

e  

 
 
．
c
  
 



Regarding the instructions of Wired Remote
Control Switch or Wireless Remote Control
Switch,read the operation manual attached
to the control switch.

7
7.1
outlet
Outlet
Knob
Right Side
Left Side
Note:
There are two grilles on the panel of
HP-E-NA, which should be removed
respectively.

8.2
8.4
8
7.2
7.3
Left Side
Knobs (two)
Zoom-in
View of Knob Right side
Remove the other filter screen in the same way.
8.3

6
R410A
* To avoid damage to the resin covers,before
lifting or moving the indoor unit,put a cloth
on the resin covers.
21 Wrench

7
2.3
Indoor Unit Panel Selected
07~14 HP-D-NA
18~24 HP-E-NA
Air Panel(optional)
8
Screw 8
Magnet Ring 1
For Fixing Magnet Ring
1

8
150mm Min.
150mm Min.
1500mm Min.
500mm
Min.
Piping
Connection
Distance From Wall Side
1,500mm Min.
150mm Min.
150mm Min.
500mm Min.
Piping
Connection Side
1,000mm Min.
Service Space
230mm Min.
Service Hole(450Min.)

9
Air Outlet
Unit Size B
Indoor Unit
Panel
Unit Size 470
Dimension of
Opening 500
Refrigerant
Outlet Pipe
Dimension of Opening A
Dimension of Panel D
Dimension of Suspension Bolts C
20
10
+20
0
Dimension of Panel 550
Dimension of
Suspension Bolts 450
（mm)
Unit: mm
Sizes
Model A B C D
AVY-07UXJSJA
AVY-09UXJSJA
AVY-12UXJSJA
1000 910 958 1100
AVY-14UXJSJA
AVY-18UXJSKA 1270 1180 1228 1370
AVY-24UXJSKA
For Concrete Slab
150 to 160mm
Steel
Insert
(100 to150kg)
Concrete
Anchor Bolt
(W3/8 or M10)
For Steel Beam
Suspension Bolt
(W3/8 or M10)
l Beam
For Wooden Beam
Wooden Rib
(60 to 90mm square timber)
Wooden Beam Suspension Bolt
Square Washer
Nut
Nut
Square Washer
4.3.2
*
(mm)
Approx. 50
28+3
217
4.5
(3) Use a gradienter or transparent plastic hose
filled with water to level the two directions of
indoor unit, length and width sides.
Gradienter
Suspension Bolt
Suspension
Bracket
Bracket
Transparent
Plastic Hose
If indoor unit is installed in a position inclined
to the reverse direction, it may cause false
operation of float switch and there result in
leakage.
4.6
Piping
Connection
Side

10
4.3.3
Air Outlet
Indoor Unit
Refrigerant
Outlet Pipe
（mm)
Bottom View
Side View
Suspension Bolt
Pattern Board for Installation
Checking Scale 01 Checking Scale 02
(1) Pattern Board for Installation is
provided in the packing，please cut it
off.
(2)Adjust the distance between indoor
unit and ceiling.
Adjust the indoor unit to a proper
position with the checking scale provided
by the factory
Dimension of
Opening
Connected to Indoor Unit
Indoor Unit
Ceiling
Supported by
Surface of Ceiling
Fig. 4.7 Adjustment of Distance to Indoor Unit
(3)Cutting the Ceiling
Mount ceiling opening to the indoor unit with
screws (four) by using Pattern Board. Cut the
ceiling based on opening dimension of the
pattern board and mount the panel.
Pattern Board
Adjustment Range
3-4mm
Panel Fixing Screw
Bolt M6
(Panel Accessories)
After installation is completed, remove the
pattern board off the ceiling.
(4)
Dimension of Opening

11
10A
0714
18
24
Drain Pipe Connection Liquid Pipe Connection Gas Pipe Connection
Flaring Dimension
Perform the flaring work as shown below.
Pipe Diameter (a)
Flaring
Diameter
(D)
12.7mm 60
(PVC, VP25)

12
2or2.5
2
5.1
850
115±4 b
a
1 1.5m
c
≤
( 50 )
P
(mm)
≤
Down-Slope
1/25 to 1/100
Drain Hose
(Accessory)
Ceiling
≤
300)
Suspension
Bracket
-
950mm.
PDrain Hose
Drain pipe must be installed horizontally or in upward slope
to prevent occurrence of air column, or otherwise water will
flow from rear of the equipment to cause leakage or
abnormal noise when the equipment is shut down.
Horizontal or Upward Slope
(a) Use the drain pipe and hose clamp provided
by the manufacture.
(b) Do not impose too much force on the pipe
joint to prevent damage to it.
(c) Do not use any bent or twisted pipe, which
may cause leakage.
(d) Complete insert the drain pipe provided by
the manufacturer, or otherwise leakage may
be caused.
Hose Band(Accessory)
Tightening Torque 2.5~3.4(N.m)
20+5
(Correct)
(Incorrect) Twisted and Incomplete Insertion
Drain Hose(Accessory)
Polyvinyl Chloride-based
Adhesive Agent
No Adhesive Agent
to be
Insert Drain Pipe Completely to
End of The Hose Connection
Drain Pipe
Connection
Elbow or Polyvinyl Chloride VP25
6.1

13
●Turn OFF the main power switch to the indoor
unit and the outdoor unit and wait for at least 3
minutes before electrical wiring work or a
periodical check is performed.
●Check to ensure that the indoor fan and the
outdoor fan have stopped before electrical
wiring work or a periodical check is performed.
●Protect the wires,drain pipe, electrical parts,
etc. from rats or other small animals.
If not protected, rats may gnaw at unprotected
parts and at the worst, a fire will occur.
●Avoid any wire from contacting with
Refrigerant tube, edge of metal plate and
electrical part in the equipment, or otherwise
the wire may be damaged or even thereby
cause fire.
●ELB with intermediate induction rate (with
shorter than 0.1 second or fewer) shall be
used, or otherwise electric shock or fire may
be caused.
●Wire shall be fixed securely, since external
force imposed to the connecting terminal may
make it loose and thereby cause fire.
●Do not use the power terminal strip used for
the air conditioner to sub-connect any power
cable, but use power branch box to sub-
connect power wire at indoor unit side instead,
and be sure to calculate wire capacity, or
otherwise too low capacity may cause fire.
●The system shall not be started until all
inspections have been performed properly.
●Wrap the accessory packing around the wires,
and plug the wiring connection hole with the
seal material to protect the product from any
condensate water or insects.
●Tightly secure the wires with the cord clamp
inside the indoor unit.
●Secure the cable of the remote control switch
using the cord clamp inside the electrical box.
●Tighten screws according to the following
torque.
M4:1.0~1.3 N.m
M5:2.0~2.4 N.m
M6:4.0~5.0 N.m
M8:9.0~11.0 N.m
M10:18.0~23.0 N.m
7.1.