HKC HQ-005 RBP Instruction manual

HQ-005 RBP Quarter-turn Electric Actuator
Installation Operation & Maintenance Manual
HumG-HQ005RBP-21 Rev.0 E PAGE 1 / 8 Valve Automation Leader HKC
HQ-005 RBP
Quarter-turn Electric Actuator
Installation, Operation &
Maintenance Manual
Address : 26, Emtibeui 28-ro, Siheung-si, Gyeonggi-do, Republic of Korea
TEL : [phone], FAX : [phone], WEB: www.hkcon.co.kr, email: [e-mail]

HQ-005 RBP Quarter-turn Electric Actuator
Installation Operation & Maintenance Manual
HumG-HQ005RBP-21 Rev.0 E PAGE 2 / 8 Valve Automation Leader HKC
Table of Contents
1. Check point before using the actuator ............................................................................................ 3
2. General Information and Features .................................................................................................. 3
3. Operation Setting ............................................................................................................................. 6
4. Wiring Diagram (AC/DC) .................................................................................................................. 7
5. Wiring Diagram (AC) ......................................................................................................................... 8

HQ-005 RBP Quarter-turn Electric Actuator
Installation Operation & Maintenance Manual
HumG-HQ005RBP-21 Rev.0 E PAGE 3 / 8 Valve Automation Leader HKC
1. Check point before using the actuator
□ Make sure that the actuator specification (model number, main power, control power,
options, and etc.) is in conformity with the order specification.
□ Turn off power before performing wiring.
□ The batteries need to be charged for one hour or more when fully discharged.
□ The batteries must avoid long hours of direct sunlight exposure.
□ Connect the jump wire to J4 when using the actuator or to J5 when not in used to
prevent batteries from discharging.
□ Please do not disassemble, assemble, or modify the actuator without any technical
support or explanation from HKC company. If any abnormality or problem occurs, please
contact us immediately.
HKC Co., Ltd
Add. 26, Emtibeui 28-ro, Siheung-si, Gyeonggi-do, Republic of Korea (15119)
Tel. [phone]
Fax. [phone]
E-mail. [e-mail]
Web. www.hkcon.co.kr
※ Caution: In order to use the product correctly and safely, please make sure to fully
understand the contents of this manual before using the product.
※ Some contents of this manual may be subject to change without prior notice for the
purpose of improving the quality, etc.
2. General Information and Features
(1) Introduction
The electric actuator HQ-005 RBP model provides stable and efficient operation to quarter-turn
valves and dampers and, in case of a power failure, emergency operations are possible with
lithium polymer batteries inside the actuator.
- Actuator operation is still possible even when the power is cut off, either by automatic
operation according to user setting or by external operation command.

HQ-005 RBP Quarter-turn Electric Actuator
Installation Operation & Maintenance Manual
HumG-HQ005RBP-21 Rev.0 E PAGE 4 / 8 Valve Automation Leader HKC
- When the batteries are fully charged, the actuator can operate about 30 times with the
power off.
- HQ-005 RBP can use either AC/DC or AC power
o DC : AC/DC 24 V
o AC : AC 110/220 V
(2) Specification
IP enclosure rating IP67 Weatherproof
Enclosure High grade aluminium alloy, anti-corrosion coated
Power - AC/DC 24V, 50/60Hz
- AC 110/220V, 50/60Hz
Motor BLDC motor
Limit switch 2 x open/close SPDT, 250VAC 5A
Auxiliary limit switch 2 x open/close SPDT, 250VAC 5A
Indicator Continuous position indicator & OPEN/CLOSE LED lamps
Manual override Manual lever
Battery 3 x lithium polymer batteries 3.7V / 650mAh
Ambient temperature -20 to 70
℃
Ambient humidity 60% RH Max. (non-condensing)
Adjustment Device
(Switch)
- STOP : Operation by external command in case of a power failure
- OPEN : Fail open (Full open) in case of a power failure
- CLOSE : Fail close (Full close) in case of a power failure
Board RBP Control V 2.6A

HQ-005 RBP Quarter-turn Electric Actuator
Installation Operation & Maintenance Manual
HumG-HQ005RBP-21 Rev.0 E PAGE 5 / 8 Valve Automation Leader HKC
(3) Internal Parts
Internal Parts
1 Connector (Jumper)
2 Terminal (J1 ~ J5)
3 LED (OPEN / GREEN)
4 LED (CLOSE / RED)
5 Switch (OPEN / STOP / CLOSE)
6 LED1 (POWER / RED)
7 Terminal (No.2 ~ No.12)
8 RBP Control board (TOP)
9 RBP Control board (Bottom)
: Board color – AC board (RED), AC/DC board (BLUE)

HQ-005 RBP Quarter-turn Electric Actuator
Installation Operation & Maintenance Manual
HumG-HQ005RBP-21 Rev.0 E PAGE 6 / 8 Valve Automation Leader HKC
3. Operation Setting
(1) Power connection
- DC power: Terminal No.5_DC -24V (N) or AC 24V
Terminal No.6_DC +24V(P) or AC 24V
- AC power: Terminal No.5_AC 95-265V (LIVE)
Terminal No.6_AC 95-265V (NEU)
(2) Check LED1 lighting (RED) after supplying power.
(3) Take out the jump wire from J5 and connect to J4.
(4) Fail OPEN / CLOSE / STOP Switch setting.
- When the power is off, the actuator operates according to the switch setting shown below.
STOP OPEN CLOSE
External operation
command Fail OPEN Fail CLOSE
(5) External operation command setting
- OPEN control: connect Terminal No.2(OPEN) and Terminal No.4(COM)
- CLOSE control: connect Terminal No.3(CLOSE) and Terminal No.4(COM)

HQ-005 RBP Quarter-turn Electric Actuator
Installation Operation & Maintenance Manual
HumG-HQ005RBP-21 Rev.0 E PAGE 7 / 8 Valve Automation Leader HKC
4. Wiring Diagram (AC/DC)

HQ-005 RBP Quarter-turn Electric Actuator
Installation Operation & Maintenance Manual
HumG-HQ005RBP-21 Rev.0 E PAGE 8 / 8 Valve Automation Leader HKC
5. Wiring Diagram (AC)
HKC Co., Ltd Address 26, Emtibeui 28-ro, Siheung-si, Gyeonggi-do, (15119), Republic of Korea
Tel : [phone], Home page: www.hkcon.co.kr
Fax: Head O. [phone], Domestic S. [phone], Overseas S. [phone]