Hodedah HI60DR User manual

1 | P a g e
www.Hodedah.com
Assembly Instructions
This instruction booklet contains important safety information, please read and keep for future reference.
ITEM # HI60DR
6 DRAWER DRESSER
FRONT VIEW BACK VIEW
Product Dimensions: Height 34.05" x Width 55.11" x Depth 18.11"
Weight Capacity per drawer: 20 lbs.
2 people
90mins
1 YR LTD
1 Box

2 | P a g e
www.Hodedah.com
Questions, need parts, we are here to help!
FOR PROMPT, RELIABLE SERVICE PLEASE HAVE YOUR INSTRUCTION MANUAL READY
DO NOT RETURN PRODUCT TO THE STORE
If parts are missing or damaged please contact our customer service team and we will
gladly ship your replacement parts FREE of charge within ONE YEAR of purchase!
______________________________________________
WARRANTY
Hodedah warrants this product to be free from defects in materials and workmanship and agrees to
remedy any such defect. This warranty covers one year from the date of original purchase. This is solely
limited to replacement of defective parts and no assembly for labor is included. This warranty does not
apply to any product that has been improperly assembled, subjected to misuse, abuse or which has been
altered or repaired in any way. To obtain warranty service, original purchaser must present the following;
original bill of sale, date of purchase, where the product was purchased and images if applicable.
Components replaced warranted through the remainder of the original warranty only. The defective part
will be replaced without charge, subject to the terms and conditions described above.
WARNING
This product contains small parts, keep away from children.
This product contains plastic bags, keep away from children.
Serious or fatal crushing injuries can occur from furniture tip-over. To help
prevent this, place heaviest items on the lower shelves and drawers. Do not set
heavy objects on top shelves and drawers.
Never allow children to climb or hang on drawers, shelves and doors.
Never open more than one drawer at a time.
The use of tip-over restraints may reduce but not eliminate the risk of tip-over.
Phone
Mon –Fri | 9:30 am to 5pm EST
1 - 855 –HODEDAH
1 –855 –463 -3324
Email
Send us an email
[e-mail]
Website
Visit our website to open a case
www.Hodedah.com

3 | P a g e
www.Hodedah.com
Let’s get started…
Helpful hints, read before beginning assembly
Make sure you receive all boxes. If your item is packed in one box, box count will read 1
of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second
box will read 2 of 2.
Read each step carefully. It is very important that each step is performed in the correct
order. If these steps are not followed in sequence, assembly difficulties will occur.
Work in a spacious level area, preferably carpet, near the place the unit will be used.
DO NO USE power tools to assemble your furniture, it will strip and damage parts.
Your package should include the following hardware and parts. Parts are labeled or
stamped on the raw edge. Please inspect contents to ensure you have received all
components. If you are missing any hardware or parts please contact customer
service right away before assembly.
Assembly Tools Required(not supplied)
Hammer Phillips Screwdriver Tape Measure No Power Tools Needed
____________________________________________________________________________________
Product Care and Maintenance
Wipe clean with dry soft cloth, never use chemicals or cleaning products that will
damage the finish.
Avoid placing your furniture in direct sunlight, as sunlight causes fading.
Never push, drag or pull your furniture, to move to a new location carefully with two or
more people carry the unit to its new location.
Avoid extreme changes in temperature by arranging furniture away from radiators, heat
and air vents and air conditioning units.

4 | P a g e
www.Hodedah.com
Hardware List
A
8x25mm Dowel
QTY
72Pcs
B
63mm Myfix
QTY
5Pcs
C
33mm Myfix
QTY
24Pcs
D
Minifix
34Pcs
E
M4x45mm Screw
40Pcs
F
M3.5x16mm Screw
72Pcs
G
Sticker
10Pcs
H
Drawer Slide (300mm)
6Sets
I
5/8 Nail With Pin
6Pcs
J
6/8 Power Pin
40Pcs
Important
1. Before you throw the package, please use the Check Box to identify the parts and hardware to
ensure that you have everything you need.
2. Check and measure the bolts before applying them to parts.
3. Do not completely tighten all hardware until the entire assembly is complete, unless indicated
otherwise.

5 | P a g e
www.Hodedah.com
Parts List
1 Top Panel
1400x460x15mm
QTY
1Pc
2 Left Side Panel
845x440x15mm
QTY
1Pc
3 Right Side Panel
845x440x15mm
QTY
1Pc
4 Divider Panel
845x440x15mm
1Pc
5 Top
Strengthening Panel
676x50x15mm
2Pcs
6Left - Back
Strengthening Panel
676x70x15mm
1Pc
7 Right - Back
Strengthening Panel
676x70x15mm
1Pc
8Left - Front
Strengthening Panel
676x70x15mm
2Pcs
9 Right - Front
Strengthening Panel
676x70x15mm
2Pcs
10 Coni Panel
676x50x15mm
4Pcs
11 Left - Leg
Panel
676x85x15mm
2Pcs
12 Right - Leg
Panel
676x85x15mm
2Pcs
13 Left - Drawer
Front Panel
691x238x15mm
3Pcs
14 Right - Drawer
Front Panel
691x238x15mm
3Pcs
15 Drawer –Left
Side Panel
350x145x15mm
6Pcs
16 Drawer –Right
Side Panel
350x145x15mm
6Pcs
17 Drawer End
Panel
619x145x15mm
6Pcs
18 Drawer Base
Supporting Panel
335x50x15mm
6Pcs

6 | P a g e
www.Hodedah.com
19 Drawer Base
Panel
628x344x2.5mm
6Pcs
20 Back Panel
788x348.5x2.5mm
4Pcs
The Breakdown…
1
2
4
3
5
5
6
7
8
10
8
10
9
10
9
10
11
11
12
12
13
18
15
16
17
19
14
15
16
17
19
20
20
20
13
18
15
16
17
19
14
18
15
16
17
19
13
18
15
16
17
19
14
18
15
16
17
19
18

7 | P a g e
www.Hodedah.com
On hardware list, you will find six bundles of drawer slide (H), left and right as shown in
picture below.
Left Drawer Slide(H)
Flat Shaped - Left
"L" Shaped - Left
Right Drawer Slide(H)
Flat Shaped - Right
"L" Shaped - Right

8 | P a g e
www.Hodedah.com
Step 1
Insert PVC dowels (A) to Panel 2, 3, 4, 5, 6, 7, 8, 9, 11, 12, 15 and 16's non-thru holes
as shown, using hammer to gently tap them in.
Non-thru holes (are small indents in the wood that show you where the screws should
be.)
2
45
6
8
11 11
8
9
9
12 12
15 16
7
15 16
15 16
5
315 16
15 16
15 16
A
8x25mm Dowel
72Pcs

9 | P a g e
www.Hodedah.com
Step 2
Place the flat shaped - right of the
drawer slide (H) at the predrilled
holes on the panel 3 as shown .
Then tighten the drawer slide (H)
with 3 screws (F).
H
F
3
H
F
Place the flat shaped - left of the
drawer slide (H) at the predrilled
holes on the panel 2 as shown.
Then tighten the drawer slide (H)
with 3 screws (F).
H
F
2
H
F
F
M3.5x16mm Screw
18Pcs
H
Drawer Slide 300mm - Right
3Pcs
H
Drawer Slide 300mm - Left
3Pcs

10 | P a g e
www.Hodedah.com
Step 3
Place the flat shaped - right of the
drawer slide (H) at the 3 predrilled
holes area shown at left view of
panel 4 . Then tighten it with 3
screws (F).
Left View
4
H
F
Place the flat shaped - left of the
drawer slide (H) at the 3 predrilled
holes area shown at right view of
panel 4. Then tighten it with 3
screws (F).
H
F
4
H
FRight View
F
M3.5x16mm Screw
18Pcs
H
Drawer Slide 300mm - Right
3Pcs
H
Drawer Slide 300mm - Left
3Pcs

11 | P a g e
www.Hodedah.com
Step 4
*Place 33mm myfix (C) long piece onto the holes of panel 1, 13 and 14. (You will use 24
pieces)
1
13
14
13
14
13
14
C
33mm Myfix
24Pcs

12 | P a g e
www.Hodedah.com
Step 5
*Attach panel 8 and 9 onto panel 10, align the position properly and slightly top them in
with hammer.
8
9
10
10 8
9
10
10

13 | P a g e
www.Hodedah.com
Step 6
*Insert 63mm myfix (B) onto the holes of panel 8 and 11 as shown
*Insert the minifix (D) nuts with the cross arrow mark facing upwards and tighten it
clockwise.
8
8
11
11
6
B
63mm Myfix
5Pcs
D
Minifix
5Pcs

14 | P a g e
www.Hodedah.com
Step 7
* Attach panel 5, 6, 8 and 11 onto panel 2, align the position properly and slightly tap
them in with hammer.
*Fasten screws (E) from the outside of panel 2 by using the predrilled holes to fix
panel 6, 8 and 11.
*Cover all the screws (E)' head with stickers (G) provided by stick up onto hole of screw
(E)' heads one by one.
6
11
8
8
11
2
5
E
G
E
M4x45mm Screw
5Pcs
G
Sticker
5Pcs

15 | P a g e
www.Hodedah.com
Step 8
*Attach panel 4 onto panel 6, 8 and 11, align the position properly and slightly tap them
in with hammer.
2
11
11
8
8
6
4

16 | P a g e
www.Hodedah.com
Step 9
*Attach panel 5, 7, 9 and 12 onto panel 4, align the position properly and slightly tap
them in with hammer.
* Tighten minifix (D) nuts clockwise to lock minifix up to fix the panel as shown.
2
611
11
4
8
8
9
9
7
12
12
5
D
D
Minifix
5Pcs

17 | P a g e
www.Hodedah.com
Step 10
* Attach panel 3 onto panel 5, 7, 9 and 12, align the position properly and slightly tap
them in with hammer.
*Fasten screws (E) onto the predrilled holes of panel 3 to fix panel 7, 9 and 12.
*Cover all the screws (E)' head with stickers (G) provided by stick up onto hole of screw
(E)' heads one by one.
2
4
7
12
9
9
12
3
5
E
G
E
M4x45mm Screw
5Pcs
G
Sticker
5Pcs

18 | P a g e
www.Hodedah.com
Step 11
*Insert nails (I) protection onto the bottom edge of panel 2, 3 and 4, slightly tapping them
in with a hammer.
2
6
11
11
4
7
12
12
3
I
I
5/8 Nail With Pin
6Pcs

19 | P a g e
www.Hodedah.com
Step 12
*Attach panel 1 position properly onto panel 2, 3 and 4 and align the top panel onto the
PCV dowels. (As shown)
* Gently tap the panel 1 to connect panel 2, panel 3 and panel 4 firmly.
*Insert minifix (D) nuts into both sides predrilled holes of panel 2, 3 and 4, then tighten
them clockwise in order to lock minifix up by going underneath panel 1.
1
3
2
4
5
5
11
12
8
9
8
9
D
D
Minifix
6Pcs

20 | P a g e
www.Hodedah.com
Step 13
*Fix approximately 40 pieces of nails (J) into panel 20 using a hammer.
1
3
12
11
20
20
20
20
J
J
6/8 Power Pin
40Pcs