Hodedah HI80DR User manual

1 | P a g e
www.Hodedah.com
Assembly Instructions
This instruction booklet contains important safety information, please read and keep for future reference.
ITEM # HI80DR
8 DRAWER DRESSER
FRONT VIEW BACK VIEW
Product Dimensions: Height 32.67" x Width 55.11" x Depth 15.74"
Weight Capacity per drawer: 20 lbs.
2 people
90mins
1 YR LTD
1 Box

2 | P a g e
www.Hodedah.com
Questions, need parts, we are here to help!
FOR PROMPT, RELIABLE SERVICE PLEASE HAVE YOUR INSTRUCTION MANUAL READY
DO NOT RETURN PRODUCT TO THE STORE
If parts are missing or damaged please contact our customer service team and we will
gladly ship your replacement parts FREE of charge within ONE YEAR of purchase!
______________________________________________
WARRANTY
Hodedah warrants this product to be free from defects in materials and workmanship and agrees to
remedy any such defect. This warranty covers one year from the date of original purchase. This is solely
limited to replacement of defective parts and no assembly for labor is included. This warranty does not
apply to any product that has been improperly assembled, subjected to misuse, abuse or which has been
altered or repaired in any way. To obtain warranty service, original purchaser must present the following;
original bill of sale, date of purchase, where the product was purchased and images if applicable.
Components replaced warranted through the remainder of the original warranty only. The defective part
will be replaced without charge, subject to the terms and conditions described above.
WARNING
This product contains small parts, keep away from children.
This product contains plastic bags, keep away from children.
Serious or fatal crushing injuries can occur from furniture tip-over. To help
prevent this, place heaviest items on the lower shelves and drawers. Do not set
heavy objects on top shelves and drawers.
Never allow children to climb or hang on drawers, shelves and doors.
Never open more than one drawer at a time.
The use of tip-over restraints may reduce but not eliminate the risk of tip-over.
Phone
Mon –Fri | 9:30 am to 5pm EST
1 - 855 –HODEDAH
1 –855 –463 -3324
Email
Send us an email
[e-mail]
Website
Visit our website to open a case
www.Hodedah.com

3 | P a g e
www.Hodedah.com
Let’s get started…
Helpful hints, read before beginning assembly
Make sure you receive all boxes. If your item is packed in one box, box count will read 1
of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second
box will read 2 of 2.
Read each step carefully. It is very important that each step is performed in the correct
order. If these steps are not followed in sequence, assembly difficulties will occur.
Work in a spacious level area, preferably carpet, near the place the unit will be used.
DO NO USE power tools to assemble your furniture, it will strip and damage parts.
Your package should include the following hardware and parts. Parts are labeled or
stamped on the raw edge. Please inspect contents to ensure you have received all
components. If you are missing any hardware or parts please contact customer
service right away before assembly.
Assembly Tools Required(not supplied)
Hammer Phillips Screwdriver Tape Measure No Power Tools Needed
____________________________________________________________________________________
Product Care and Maintenance
Wipe clean with dry soft cloth, never use chemicals or cleaning products that will
damage the finish.
Avoid placing your furniture in direct sunlight, as sunlight causes fading.
Never push, drag or pull your furniture, to move to a new location carefully with two or
more people carry the unit to its new location.
Avoid extreme changes in temperature by arranging furniture away from radiators, heat
and air vents and air conditioning units.

4 | P a g e
www.Hodedah.com
Hardware List
A
8x25mm Dowel
QTY
60Pcs
B
63mm Myfix
QTY
4Pcs
C
33mm Myfix
QTY
30Pcs
D
Minifix
38Pcs
E
M4x45mm Screw
54Pcs
F
M3.5x16mm
Screw
96Pcs
G
Sticker
8Pcs
H
Drawer Slide (300mm)
8Sets
I
40mm Square
Leg
6Pcs
J
M4x32mm Screw
12Pcs
K
Handle 525.160
8Pcs
L
M4x28mm Screw
16Pcs
M
6/8 Power Pin
50Pcs
Important
1. Before you throw the package, please use the Check Box to identify the parts and hardware to
ensure that you have everything you need.
2. Check and measure the bolts before applying them to parts.
3. Do not completely tighten all hardware until the entire assembly is complete, unless indicated
otherwise.

5 | P a g e
www.Hodedah.com
Parts List
1 Top Panel
1400x400x15mm
QTY
1Pc
2 Left Side Panel
760x400x15mm
QTY
1Pc
3 Right Side Panel
760x400x15mm
QTY
1Pc
4 Divider Panel
760x400x15mm
1Pc
5 Bottom Panel
1400x400x15mm
1Pc
6 Left - Front
Strengthening Panel
676x70x15mm
3Pcs
7 Right - Front
Strengthening Panel
676x70x15mm
3Pcs
8Left - Drawer
Front Panel
691x191x15mm
4Pcs
9 Right - Drawer
Front Panel
691x191x15mm
4Pcs
10 Drawer –Left
Side Panel
350x116x15mm
8Pcs
11 Drawer –Right
Side Panel
350x116x15mm
8Pcs
12 Drawer End
Panel
619x116x15mm
8Pcs
13 Back Panel
788x348.5x2.5mm
4Pcs
14 Drawer Base
Panel
628x344x2.5mm
8Pcs
15 Drawer Base
Supporting Panel
335x50x15mm
8Pcs
16 Left - Back
Strengthening Panel
676x70x15mm
1Pc
17 Right - Back
Strengthening Panel
676x70x15mm
1Pc

6 | P a g e
www.Hodedah.com
The Breakdown…
1
3
4
2
5
6
6
7
7
7
6
17
16
8
9
11
10
10
11
12
12
14
15
14
15
13 13
13
8
9
11
10
10
11
12
12
14
15
14
15
9
10
11
12
14
15
9
10
11
12
14
15
8
11
10
12
14
15
8
11
10
12
14
15

7 | P a g e
www.Hodedah.com
On hardware list, you will find eight bundles of drawer slide (H), left and right as shown
in picture below.
Left Drawer Slide(H)
Flat Shaped - Left
"L" Shaped - Left
Right Drawer Slide(H)
Flat Shaped - Right
"L" Shaped - Right

8 | P a g e
www.Hodedah.com
Step 1
Insert PVC dowels (A) to Panel 2, 3, 4, 6, 7, 10, 11, 16 and 17's non-thru holes as
shown, using hammer to gently tap them in.
Non-thru holes (are small indents in the wood that show you where the screws should
be.)
11
10
11
10
11
10
11
10 11
10
11
10
11
10
11
10
34
2
16
17
6
6
6
7
7
7
A
8x25mm Dowel
60Pcs

9 | P a g e
www.Hodedah.com
Step 2
Place the flat shaped - right of the
drawer slide (H) at the predrilled
holes on the panel 3 as shown .
Then tighten the drawer slide (H)
with 3 screws (F).
3
H
F
H
F
Place the flat shaped - left of the
drawer slide (H) at the predrilled
holes on the panel 2 as shown.
Then tighten the drawer slide (H)
with 3 screws (F).
2
H
F
F
M3.5x16mm Screw
24Pcs
H
Drawer Slide 300mm - Right
4Pcs
H
Drawer Slide 300mm - Left
4Pcs

10 | P a g e
www.Hodedah.com
Step 3
Place the flat shaped - right of the
drawer slide (H) at the 3 predrilled
holes area shown at left view of
panel 4 . Then tighten it with 3
screws (F).
4
Left View
H
F
Place the flat shaped - left of the
drawer slide (H) at the 3 predrilled
holes area shown at right view of
panel 4. Then tighten it with 3
screws (F). 4
Right View
H
H
F
F
F
M3.5x16mm Screw
24Pcs
H
Drawer Slide 300mm - Right
4Pcs
H
Drawer Slide 300mm - Left
4Pcs