Hodedah HIK 78-MOP User manual

1
Hodedah
www.hodedah.com
support @hodedah.com
HIK 78-MOP
L3538'' / 4447'' X D1548" X H3528"

PART & HARDWARE LIST
2
M1
CAP
902 MAGNET PLATE
902 MAGNET
Hodedah
www.hodedah.com
support @hodedah.com
APLASTIC DOWEL M8 X 25MM 22
B CB SCREW M3 X 12MM 2
H
I
J1
CSK CAP M6 X 40MM 13
J2
POWER NAIL 6/8
4
K
PVC SHELF SUPPORT 4
DOOR SUPPORT SPRING
2
O
HANDLE 2379 (160MM) - PVC
40
P/H SCREW M4 X 24MM
N
1
17
3
4
2
O1
O2
14
2
3
5
8
7
6
9
10 11
12
13 14
15
13
17
16
K1 K2
C CB SCREW M3.5 X 12MM 12
DCB SCREW M3.5 X 16MM 16
E CB SCREW M4 X 25MM 2
F CB SCREW M4 X 35MM 8
G
2
MINIFIX 5654 4
P/H SCREW M4 X 40MM
DRAWER SLIDE 14"
P1 2
PLATE CASTER WITHOUT LOCK
P2 2
PLATE CASTER WITH LOCK
Q1
ALLEN KEY
2ALUMINIUM PIPE (380MM)
R
L
M2
M3

3
- This product contains small components, please ensure that they are
kept away from small children.
- THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE
REFERENCE.
STOP
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, email our customer
service. We will gladly ship your replacement parts
FREE of charge.
email us at
[email protected]
For prompt, reliable service; please have your
assembly manual ready.
Need Parts or Assistance?
Hodedah
www.hodedah.com
support @hodedah.com

4
Thank you for purchasing from Hodedah
To learn more about hodedah and our products visit
www.hodedah.com
READ BEFORE BEGINNING ASSEMBLY
- Read each step carefully. It is very important that each step of instruction is performed in the
correct order. If these steps are not followed in sequence, assembly difficulties will occur.
- Make sure all parts are included. Most parts are labeled or stamped on the raw edge.
- Work in spacious area, preferably on a carpet, near the place the unit will be used.
- Do not use power tools to assemble your furniture. Power tools may strip or damage the parts.
HELPFUL HINTS
- Call us if you need assistance.
- Move your new furniture carefully, with two people lift and carry the unit to it's new location.
- Never push, drag or pull your furniture (especially on carpet).
Warranty Information
Hodedah warrants this product to be free from defects in material and workmanship agrees to
remedy any such defect. This warranty covers one year from the date of original purchase. This is
solely limited to be repair or replacement of defective parts and no assembly labor is included.
This warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way.
To obtain warranty, purchaser must present original bill of sale. Components repaired or
replaced warranted through the remainder of the original warranty period only. The defective
components will be repaired or replaced without charge, subject to the terms and conditions
described above.
For help with assembly, identifying parts, product information or to
order parts, please contact us :
Call us at :
718-456-0505
Monday - Friday
9:00am - 5:00pm
Visit our website :
www.hodedah.com
Hodedah
www.hodedah.com
support @hodedah.com

MINIFIX 5654
H4
K2 4
STEP 1
APLASTIC DOWEL M8 X 25MM 22
5
Hodedah
www.hodedah.com
support @hodedah.com
- Insert 22 x Plastic dowel (A) into panels (1), (3), (4), (5), (6), (7) & (8) using a plastic hammer.
- Insert 4 x Minifix 5654 (K2) into the bottom of Panel (9) using a Philips head screwdriver.
- Insert 4 x Pvc shelf support (H) into panels (1) & (4) by push with thumb.
A
BOTTOM VIEW
K2
3
5
7
84
1
9
6
LEFT VIEW RIGHT VIEW
14
G
PVC SHELF SUPPORT

STEP 2
6
Hodedah
www.hodedah.com
support @hodedah.com
- Assemble 2 x Drawer slide (O1) to Panel (1) & (4) with 6 x CB Screw M3.5 x 12m (C) using Philips head
screwdriver.
- Insert 4 x Door support spring (I) into Panel (10) & (11) by push with thumb.
- Attach 2 x Handle 2379 (M1) to Panel (10) & (11) with 4 x P/H Screw M4 x 24mm (M2) using a Philips
head screwdriver.
- Fix 2 x Magnet plate (J1) to Panel (10) & (11) with 2 x CB Screw M3 x 12mm (B) using a Philips head
screwdriver.
2
C
902 MAGNET PLATE 2
B
DOOR SUPPORT SPRING 4
HANDLE 2379 (160MM) - PVC
P/H SCREW M4 X 24MM 4
M1
LEFT VIEW RIGHT VIEW FRONT VIEW
LEFT VIEW RIGHT VIEW
14
O1
C
10
M1
I
B
M2
10 J1
11
11
6
CB SCREW M3 X 12MM 2
CB SCREW M3.5 X 12MM
I
J1
M2
DRAWER SLIDE 14" 2
O1

STEP 3
7
Hodedah
www.hodedah.com
support @hodedah.com
L6
J2 2
GCSK CAP M6 X 40MM 6
902 MAGNET RALUMINIUM PIPE (380MM) 1
BOTTOM VIEW
J2
3
LQG
QG
QL
G
23
1
5
3
R
5
1
- Insert 2 x Magnet (J2) to Panel (3) using a plastic hammer (Knock gently).
- Attach Panel (2) into Panel (1). Insert Csk Cap M6 x 40 (G) by using Allen key (Q).
- Attach Panel (3) & (3) into Panel (1). Insert Csk Cap M6 x 40 (G) and Cap (L) by using Allen key (Q).
- Attach Panel (5) and insert Csk Cap M6 x 40mm (G) & Cap (L). Tighten using Allen key (Q).
- Slot Alluminium pipe (R) into Panel (5).
Q1ALLEN KEY
CAP
QL
G

STEP 4
8
Hodedah
www.hodedah.com
support @hodedah.com
Q
6
G
ALLEN KEY 1
D
CSK CAP M6 X 40MM 8
CAP
L
- Attach panel (4) to panels (2), (3).
- Insert 3 x CSK Cap screw (G) & Cap (L) into panel (4) and tighten with a Allen Key (Q).
- Attach Panel (8) to Panel (7) & insert Csk Cap M6 x 40mm (G) & Cap (L), tighten with Allen key (Q).
- Slot Alluminium pipe (R) to Panel (8).
- Attach Panel (6) to Panel (7) & insert Csk Cap M6 x 40mm (G) & Cap (L), tighten with Allen key (Q).
- Attach Panel (5), (6) & (7) to Panel (4) & & insert Csk Cap M6 x 40mm (G) & Cap (L), tighten with
Allen key (Q)
- Fix 2 x Plate caster without stopper (P1) & Plate caster without stopper (P2) into Panel (2). Use
16 x Csk M3.5 x 16mm (D) & tighten using Phillips Head screwdriver.
L
Q
QG
G
L
G
L
4
8
7
R
6
LQGD
P1
D
P2
CB Screw M3.5 X 16MM 16
2
PLATE CASTER WITHOUT STOPPER
2
PLATE CASTER WITH STOPPER
P1
P2
2

RIGHT LEFT
Q
K1 L
9
12
E
14
M1
M3 N
STEP 5
9
Hodedah
www.hodedah.com
support @hodedah.com
F
1
E
8
C
2
- Attach panel (9) to panels (1) & (4), insert 4 x Minifix (K1) & 4 x Cap (L). Tighten with Allen key (Q).
- Insert 2 x CB Screw M4 x 25mm (E) to Panel (12) back using a Philips head screwdriver.
- Attach 2 x Panel (13) to Panel (12). Then attach Panel (14) to Panel (13) using CB screw M4 x 35mm (F)
using Phillips head screwdriver.
- Fix 1 x Handle (M1) to Panel (12) front. Insert 2 x P/H Screw M4 x 40mm (M3) & tigthen with Phillips head
screwdriver.
- Fix 2 x Drawer slide 14" (O2) to both panel (13) using CB Screw M3.5 x 12mm (C) & tighten with Phillips
head screwdriver.
- Slot 1 x panel (5) & use 10 x Power nail (N) to fix it.
CB SCREW M3.5 X 12MM 6
2
10
POWER NAIL 68"
M3
N
K1 MINIFIX 5654 4
LCAP 4
2
DRAWER SLIDE 14"
O2
2ALLEN KEY
Q
CB SCREW M4 X 25MM
CB SCREW M4 X 35MM
M1 HANDLE 2379 (160MM) - PVC
P/H SCREW M4 X 40MM
4
1
15

STEP 6
10
Hodedah
www.hodedah.com
support @hodedah.com
- Fix 30 x Power nail (N) into Panels (16) using a hammer.
- Slide panel (17) inside the kitchen cabinet.
- Insert the Door support spring (I) at the panel (10) top into the hole at bottom of panel (3).
- Press the Door support spring (I) at the panel (10) bottom & insert into the hole at panel (2).
- Do the same step for the panel (11)
Job Complete !
In the interest of our environment please dispose of all packaging throughtfully.
TOP
BOTTOM
16
12
17
N
10
10 & 11
11
10 & 11
30
POWER NAIL 68"
N