Hodedah HI 681 User manual

1 | P a g e
www.Hodedah.com
Assembly Instructions
This instruction booklet contains important safety information, please read and keep for future
reference.
ITEM # HI 681
Full - Size Platform Bed
FRONT VIEW BACK VIEW
Product Dimensions: Height 47.5” x Width 58.5” x Depth 78”
2 people
90mins
1 YR LTD
1 Box

2 | P a g e
www.Hodedah.com
Questions, need parts, we are here to help!
FOR PROMPT, RELIABLE SERVICE PLEASE HAVE YOUR INSTRUCTION MANUAL READY
DO NOT RETURN PRODUCT TO THE STORE
If parts are missing or damaged please contact our customer service team and we will
gladly ship your replacement parts FREE of charge within ONE YEAR of purchase!
______________________________________________
WARRANTY
Hodedah warrants this product to be free from defects in materials and workmanship and agrees to
remedy any such defect. This warranty covers one year from the date of original purchase. This is solely
limited to replacement of defective parts and no assembly for labor is included. This warranty does not
apply to any product that has been improperly assembled, subjected to misuse, abuse or which has been
altered or repaired in any way. To obtain warranty service, original purchaser must present the following;
original bill of sale, date of purchase, where the product was purchased and images if applicable.
Components replaced warranted through the remainder of the original warranty only. The defective part
will be replaced without charge, subject to the terms and conditions described above.
WARNING
•This product contains small parts, keep away from children.
•This product contains plastic bags, keep away from children.
•Serious or fatal crushing injuries can occur from furniture tip-over. To help
prevent this, place heaviest items on the lower shelves and drawers. Do not set
heavy objects on top shelves and drawers.
•Never allow children to climb or hang on drawers, shelves and doors.
•Never open more than one drawer at a time.
•The use of tip-over restraints may reduce but not eliminate the risk of tip-over.
Phone
Mon –Fri | 9:30 am to 5pm EST
1 - 855 –HODEDAH
1 –855 –463 -3324
Email
Send us an email
[email protected]
Website
Visit our website to open a case
www.Hodedah.com

3 | P a g e
www.Hodedah.com
Let’s get started…
Helpful hints, read before beginning assembly
•Make sure you receive all boxes. If your item is packed in one box, box count will read 1
of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second
box will read 2 of 2.
•Read each step carefully. It is very important that each step is performed in the correct
order. If these steps are not followed in sequence, assembly difficulties will occur.
•Work in a spacious level area, preferably carpet, near the place the unit will be used.
•DO NO USE power tools to assemble your furniture, it will strip and damage parts.
•Your package should include the following hardware and parts. Parts are labeled or
stamped on the raw edge. Please inspect contents to ensure you have received all
components. If you are missing any hardware or parts please contact customer
service right away before assembly.
Assembly Tools Required (not supplied)
Hammer Phillips Screwdriver Tape Measure No Power Tools Needed
____________________________________________________________________________________
Product Care and Maintenance
•Wipe clean with dry soft cloth, never use chemicals or cleaning products they will
damage the finish.
•Avoid placing your furniture in direct sunlight, as sunlight causes fading.
•Never push, drag or pull your furniture, to move to a new location carefully with two or
more people carry the unit to its new location.
•Avoid extreme changes in temperature by arranging furniture away from radiators, heat
and air vents and air conditioning units.

4 | P a g e
www.Hodedah.com
Hardware List
A
M4x25mm Screw
QTY
24Pcs
B
Washer
QTY
14Pcs
C
JCBC M6x25mm
QTY
8Pcs
D
JCBC M6x35mm
6Pcs
E
JCBC M6x45mm
4Pcs
F
L Key (M4x65mm)
1Pcs
G
L Key (M5x70mm)
1Pcs
Important
1. Before you throw the package, please use the Check Box to identify the parts and hardware to
ensure that you have everything you need.
2. Check and measure the bolts before applying them to parts.
3. Do not completely tighten all hardware until the entire assembly is complete, unless indicated
otherwise.

5 | P a g e
www.Hodedah.com
Parts List
1 Head Board
1499x714x76mm
QTY
1Pc
2 Foot Board
1426x305x30mm
QTY
1Pc
3 Side Rail
959x155x15mm
QTY
2Pcs
4 Side Rail
959x155x15mm
2Pcs
5Side Support
275x84x30mm
2Pcs
6 LVL Slats
1384x60x12mm
12Pcs
7 Center Leg
250x30x30mm
4Pcs
8Center Slats
820x40x15mm
2Pcs
9 Post
605x70x20mm
2Pcs

6 | P a g e
www.Hodedah.com
The Breakdown…

7 | P a g e
www.Hodedah.com
Step 1
*Place and fix part 5 onto part 3 and 4 by inserting JCBC (C) with Washer (B).
*Fasten JCBC (C) using predrilled holes on part 5 into part 3 and 4 by using L Key (F).
C
F
B

8 | P a g e
www.Hodedah.com
Step 2
*Place and fix part 9 onto part 1.
*Insert and Fasten JCJB (D) with Washer (B) into predrilled holes on part 9 by using
L Key (F).

9 | P a g e
www.Hodedah.com
Step 3
* First prepare Part 6, 7 and 8.
*Insert JCBC (E) into predrilled holes of Part 6 and 8 thru Part 7.
*Fasten JCBC (E) by using L Key (F).

10 | P a g e
www.Hodedah.com
Step 4
*Place Part 3 and 4 to hook Part 1 and Part 2.
*Fasten JCBC by using L Key (G).