Hoist Fitness RPL-5203 User manual

**WARNING!**
TO PREVENT POSSIBLE TIPPING, BOLT THIS UNIT TO THE
EXERCISE FLOOR. FAILURE TO DO SO MAY RESULT IN SERIOUS
INJURY OR DEATH.
CATALOG NUMBER
OWNER'S MANUAL
RECORD SERIAL NUMBER HERE
Fax
[phone]
[phone]
[phone]
Note: Both Serial Number and Model Number are Required when Ordering Parts
Customer Service
0608 - 001
RPL-5203
PLATE-LOADED SEATED MID-ROW

02
04
33
34
35
36
37
40
41
43
45
46
47
48
49
OWNER'S MANUAL
PAGE 01 RPL-5203 ASSEMBLY
INSTRUCTIONS .....................................................................
FRAME ASSEMBLY ..............................................................
MACHINE ADJUSTMENT......................................................
PRE-ASSEMBLY....................................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
ABBREVIATIONS...................................................................
BOLT SIZING CHART............................................................
WASHER SIZING CHART......................................................
MAINTENANCE SCHEDULE.................................................
GENERAL MAINTENANCE INFORMATION........................
WEIGHT TRAINING TIPS.......................................................
EXERCISE LOG......................................................................
LIMITED WARRANTY............................................................
CONTENTS

OWNER'S MANUAL
PAGE 02
RPL-5203 ASSEMBLY
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
Two People
TOOLS REQUIRED
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
INSTRUCTIONS
ACCESSORIES INCLUDED
SuperLube

***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
OWNER'S MANUAL
PAGE 03 RPL-5203 ASSEMBLY

OWNER'S MANUAL
PAGE 04
RPL-5203 ASSEMBLY
FRAME ASSEMBLY

9
16
14
52
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 05 RPL-5203 ASSEMBLY

FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
RPL-5203 ASSEMBLY
OWNER'S MANUAL
PAGE 06
66
89
34
75 61
61
14
14
PROPERLY INSTALLED VIEW
9
75
16

FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
PAGE 07
OWNER'S MANUAL
RPL-5203 ASSEMBLY
24
39
62
90
80
62
14

FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
OWNER'S MANUAL
RPL-5203 ASSEMBLY PAGE 08
62
14
53
62
82
23
10
90
24

FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
PAGE 09
OWNER'S MANUAL
RPL-5203 ASSEMBLY
10
76
62
62
90
23
14

FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- WRENCH TIGHTEN ALL PREVIOUSLY
HAND TIGHTENED HARDWARE.
RPL-5203 ASSEMBLY
OWNER'S MANUAL
PAGE 10
62
78
62
38
10
23
24
90

90
14
83
62
12
62
40
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
PAGE 11
OWNER'S MANUAL
RPL-5203 ASSEMBLY

62
83
62
17
40
12
90
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
RPL-5203 ASSEMBLY
OWNER'S MANUAL
PAGE 12

85
90
62
62
46
15
16
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
PAGE 13
OWNER'S MANUAL
RPL-5203 ASSEMBLY

FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
RPL-5203 ASSEMBLY
OWNER'S MANUAL
PAGE 14
62
15
17
82
62
90

FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
OWNER'S MANUAL
PAGE 15 RPL-5203 ASSEMBLY
14
90
18
47
21

FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
RPL-5203 ASSEMBLY
OWNER'S MANUAL
PAGE 16
87
WARNING - TIE ROD ENDS (25, 26) MUST BE THREADED
A MINIMUM OF 3/8" WITH JAM NUT (86, 87) TIGHTENED
SECURELY TO ENSURE PROPER CONNECTION.
25
87
22
26
25
86
86
22
26

FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- REFER TO PAGE 33 FOR SPECIFIC
MACHINE ADJUSTMENT INFORMATION.
PAGE 17
OWNER'S MANUAL
RPL-5203 ASSEMBLY
103
IN DETAIL.
104
88
BE SURE ORIENTATION OF
CAP WASHER (88) IS AS SHOWN
26
18
26
104
88
21
25
103
22
88
16
104
103

FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
RPL-5203 ASSEMBLY
OWNER'S MANUAL
PAGE 18
61
28
61
72
72
18
64
64
21

29
89
48
49
28
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
PAGE 19
OWNER'S MANUAL
RPL-5203 ASSEMBLY