Hoist Fitness A09 User manual

Fax
FaxFax
Fax
[phone]
[phone](858) 578-7676
[phone]
[phone]
[phone](858) 578-9558
[phone]
Customer Service
Customer ServiceCustomer Service
Customer Service
[phone]
[phone](800) 548-5438
[phone]
RECORD SER AL NUMBER HERE
RECORD SER AL NUMBER HERERECORD SER AL NUMBER HERE
RECORD SER AL NUMBER HERE
MACH NE CODE
MACH NE CODEMACH NE CODE
MACH NE CODE
**WARNING!**
TO PREVENT POSSIBLE TIPPING, BOLT THIS UNIT TO THE
EXERCISE FLOOR USING MINIMUM 4-1/2" LONG BOLTS. FAILURE
TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.
OWNER'S MANUAL
OWNER'S MANUAL OWNER'S MANUAL
OWNER'S MANUAL
Note: Both Serial Number and Model Number are Required when Ordering Parts
Note: Both Serial Number and Model Number are Required when Ordering PartsNote: Both Serial Number and Model Number are Required when Ordering Parts
Note: Both Serial Number and Model Number are Required when Ordering Parts
A09
A09A09
A09
RPL-5403-B
DUAL ACTION LEG PRESS

02
04
24
26
28
31
34
35
36
38
39
40
41
42
EXERCISE LOG......................................................................
OWNER'S MANUAL
PAGE 01 RPL-5403-B ASSEMBLY
LIMITED WARRANTY............................................................
INSTRUCTIONS .....................................................................
FRAME ASSEMBLY ..............................................................
PRE-ASSEMBLY....................................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
ABBREVIATIONS...................................................................
BOLT SIZING CHART............................................................
WASHER SIZING CHART......................................................
MAINTENANCE SCHEDULE.................................................
GENERAL MAINTENANCE INFORMATION........................
WEIGHT TRAINING TIPS.......................................................
CONTENTS

OWNER'S MANUAL
PAGE 02
RPL-5403-B ASSEMBLY
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
2 PEOPLE REQUIRED FOR ASSEMBLY
TOOLS REQUIRED
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
INSTRUCTIONS

***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
OWNER'S MANUAL
PAGE 03 RPL-5403-B ASSEMBLY

RPL-5403-B ASSEMBLY
OWNER'S MANUAL
PAGE 04
FRAME ASSEMBLY

FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OTHER SIDE.
RPL-5403-B ASSEMBLY
OWNER'S MANUAL
PAGE 05
*
**
85
63
93
63
93
63
63
84
86
63
63 93
63
83
63
93
44
38
38
*
2
*

111
6
116
5
94
64
111
113
115
113
NOTE:
- HAND TIGHTEN HARDWARE.
FRAME ASSEMBLY
PAGE 06
OWNER'S MANUAL
RPL-5403-B ASSEMBLY

- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
HAND TIGHTENED HARDWARE.
- WRENCH TIGHTEN ALL PREVIOUSLY
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
OWNER'S MANUAL
PAGE 07 RPL-5403-B ASSEMBLY
63
1
5
6
63
113
113
114
88
93

29
109
17
93
63
25
NOTE:
- WRENCH TIGHTEN HARDWARE.
- WRENCH TIGHTEN ALL PREVIOUSLY
HAND TIGHTENED HARDWARE.
FRAME ASSEMBLY
OWNER'S MANUAL
RPL-5403-B ASSEMBLY PAGE 08

NOTE:
-WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 09 RPL-5403-B ASSEMBLY
4
111
113
111
113
115
28
28
3

WARNING:
BE SURE TO HAVE AT LEAST 1 PERSON TO HOLD THE PRESS ARM FRAME TO
KEEP IT FROM FALLING FORWARD. FAILURE TO DO SO CAN RESULT IN SERIOUS
INJURY OR DEATH.
ALWAYS HOLD
THIS PART IN
PLACE FOR THE
NEXT 2 STEPS
3
1
114
63
88
93
63
113
113
4
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- WRENCH TIGHTEN ALL HARDWARE FROM
PREVIOUS STEPS.
OWNER'S MANUAL
RPL-5403-B ASSEMBLY PAGE 10

- WRENCH TIGHTEN ALL PREVIOUSLY
HAND TIGHTENED HARDWARE.
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY ON OPPOSITE SIDE.
FRAME ASSEMBLY
PAGE 11
OWNER'S MANUAL
RPL-5403-B ASSEMBLY
93
116
94
64
*
*
**
ALWAYS HOLD THIS PART
IS COMPLETED
IN PLACE UNTILL THIS STEP
BE SURE TO HAVE AT LEAST 1 PERSON TO HOLD THE PRESS
ARM FRAME TO KEEP IT FROM FALLING FORWARD. FAILURE
TO DO SO CAN RESULT IN SERIOUS INJURY OR DEATH.
117
WARNING:
63

87
63
23
8
3
63
93
1
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE (87) THEN
LOOSEN (93) JUST ENOUGH FOR (8)
TO PIVOT FREELY.
OWNER'S MANUAL
RPL-5403-B ASSEMBLY PAGE 12

92
62
37
1
48
77
62
4
NOTE:
-WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 13 RPL-5403-B ASSEMBLY

62
13
20
62
80
92
3
118
119 120
121
122 62 45
- WRENCH TIGHTEN HARDWARE.
NOTE:
FRAME ASSEMBLY
RPL-5403-B ASSEMBLY
OWNER'S MANUAL
PAGE 14

63
83
63
35
93
NOTE:
- WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
PAGE 15
OWNER'S MANUAL
RPL-5403-B ASSEMBLY

121
79
20
62
118
45
122
62 120
13
6292
119
3
- WRENCH TIGHTEN HARDWARE.
NOTE:
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
FRAME ASSEMBLY
OWNER'S MANUAL
RPL-5403-B ASSEMBLY PAGE 16

-WRENCH TIGHTEN HARDWARE.
NOTE:
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 17 RPL-5403-B ASSEMBLY
11
35
63
67
89
74
90
910 90

65
78
62
16
78
62
65
- WRENCH TIGHTEN HARDWARE.
NOTE:
FRAME ASSEMBLY
RPL-5403-B ASSEMBLY
OWNER'S MANUAL
PAGE 18

-WRENCH TIGHTEN HARDWARE.
NOTE:
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 19 RPL-5403-B ASSEMBLY
15
69
61
66