HOMCOM 820-090V01 User manual

EN_IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
FR_IMPORTANT:A LIRE ATTENTIVEMENT ET À CONSERVER POUR CONSULTATION
ULTÉRIEURE
INcje026V01_US_CA
820-090V01

1

2
A34 B34
C18
F 6 G 8 H 2
D 6
4*25
1 1
E12
3*12
J 1
4*32
K 4 I 1
1
21
3*16

3

4
02
01
02
01

5
05
04
03

6
06
05
07
06

7
08
07
09
08

8
10
09
11
10

9
12
11
13
12

10
14
13
15
14

11
16
15
17
16

12
18
17
19
18

13
20
19
21
20
Done

14
IMPORTANT SAFETY INFORMATION
PLEASE READ ALL INSTRUCTIONS IN THIS MANUAL, INCLUDING ALL SAFETY,
OPERATING AND MAINTENANCE INFORMATION. TO AVOID THE POTENTIAL
RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, USERS MUST
FOLLOW THE WARNINGS IN THIS MANUAL.
1. Read all instructions before using this heater.
2. Do not use this heater outdoors.
3. Never use this heater in bathrooms, laundry areas or similar areas. Keep
away from bathtubs and other water containers.
4. Do not run the power cord under carpeting or cover with throw rugs, runners
or furniture. Keep the power cord away from congested areas, where it cannot be
tripped over.
5. When unplugging, ensure the heater is switched off.
6. Plug in to properly grounded outlets only. Always plug directly into a wall
outlet/receptacle. Never use an extension cord or relocatable power tap
(outlet/power strip).
7. To prevent a possible fire, do not block air intakes or the exhaust. Do not use
on soft surfaces, such as beds, where openings could be blocked.
8. There is a thermostat limit inside the heater. When the inner temperature
exceeds the limit, the protective device will activate, switching off the heater
automatically, avoiding the risk of fire or damages to the product.
9.Use the heater only as described in this manual. Any other use, which is not
recommended by the manufacturer, could cause a fire, electric shock or injury to
persons.
EN

15
SAVE THESE INSTRUCTIONS
! WARNING: There are no user serviceable parts inside this product. If the unit
appears to malfunction, switch off the heater and unplug immediately. Contact
customer service.
! WARNING: This heater is hot when in use. To avoid burns, do not touch the
surfaces. If provided, use handles when moving the heater. Keep flammable
materials, such as furniture, pillows, bedding, paper, clothes and curtains at least
three feet (0.9m) from the front, sides and rear of the heater.
! WARNING: Extreme caution is necessary when using the heater near small
children or vulnerable persons. When operating, never leave the heater
unattended.
!WARNING: Always unplug the heater when not in use.
WARNING: If the cord, plug or unit is damaged in any way, do not use. Return the
heater to the manufacturer for inspection or repairs.
WARNING: Do not insert objects into the ventilation or exhaust opening – this can
cause an electric shock, fire or damages to the heater.
WARNING: A heater has hot and arching parts inside. Do not use in areas where
gasoline, paint or flammable items are present.
CAUTION: When in use, the centre gets very hot – do not touch to avoid burns.
Small children must be supervised when near the heater.
Do not cover the heater with clothes, towels or other fabrics to avoid a fire hazard.
EN

16
GROUNDING INSTRUCTIONS
! DANGER: Plugging into an improper grounded outlet can result in electric shock.
If you have any doubts whether the product is properly grounded, check with a
qualified electrician or serviceperson.
Do not modify the plug.
If it does not fit into the outlet, have a proper outlet installed by a qualified
electrician.
The product must be grounded. If there is a malfunction, the grounding provides a
path of minimum resistance for an electric current, reducing the risk of an electric
shock. This product has a cord, an equipment-grounding conductor and grounding
plug. It must be plugged into an appropriate outlet, which is properly installed and
grounded in accordance with local laws and regulations.
This heater uses 120-volt circuits and has a grounded plug. An adapter is available
from your local store, which connects three-blade plugs to two-blade plugs.
The green grounding lug extending from the adapter, must be connected to a
permanent ground, such a properly grounded outlet box. If there is a three-slot
grounded socket available, do not use an adapter.
EN

17
EN

18
STEP 1
Put the EVA cushion gasket in (as shown below), which softens the impact between
the wood cabinet and fireplace.
STEP 2
Remove the unit from its packaging, laying out all spare parts on the floor. Ensure
there are no items left in the packaging.
STEP 3
Carefully install the unit from the back of the mantel, using the opening in the
centre.
Check the alignments, then attach the unit by inserting screws through the drilled
holes, which is on the trim of the mantel.
Note: Do not attempt to install the unit from the front of the mantel. It will not fit.
EN

19
-Identifying the control panel
-The control panel is on the top right corner of the unit.
-Control panel contains the display (1), function indicator (2), timer (3), heater
control (4), flames control (5) and main power (6).
The display (1) shows information about the flame level, timer and current
temperature.
-Understanding the function indicator
- The function indicator (2) has three LEDS – red, green and blue. The red LED is
for the Fahrenheit heating function, the green LED is for Celsius and the blue LED
indicates the timer is active.
The infrared receiver, which communicates with the remote control, is at the
bottom of the three LEDS.
EN