Home Styles 20 05003 0943 User manual

Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Cartons 20 05003 0941, 0942 are also needed for assembly.
Tool(s) required for assembly: LevelPhillips screwdriver,
J.
Post
1 pc.
I.
Post
1 pc.
K.
Post
1 pc.
L.
Post
1 pc.
M.
Side Panel
2 pcs.
20 05003 0943
Kitchen Island
O.
Shelf
4 pcs.
P.
Door
1 pc.
Q.
Door
1 pc.

Assembly Instructions 2/6
Cam Lock Screw
Figure 2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Insert Cam Lock Screws into pre-drilled holes in Posts (K) and (L),
then tighten. (See Figure 1)
STEP 2
Attach Back Rail (C) to Post (K) with Cam Lock.
(See Figure 2)
Attach Back Upright (D) to Back Rail (C).
Slide Back Panels (N) into position.
Attach Back Rail (C) to unit with Cam Lock.
Attach Post (L) to unit with Cam Locks.
KL
Figure 1
C
Cam Lock
K
L
C
D
C
N
N

Assembly Instructions 3/6
STEP 4
Attach Posts (I) and (J) to unit with Head Cap Bolts.
Slide Side Panels (M) into position.
STEP 3
Attach unit and Middle Panel (E)
to Base (H) with Head Cap Bolts.
(See Figure 3)
Head Cap Bolt
Figure 3
E
H
Head Cap Bolt
I
J
M
M

Assembly Instructions 4/6
Figure 4
STEP 5
Attach Rails (F) to unit
with Head Cap Bolts.
Attach Adjustable Pins
into posts and
middle panel at
desired level.
(See Figure 4)
Slide Shelves (G)
and (O) into position.
F
F
Head Cap Bolt
G
G
Adjustable Pin
G
G
O
O
O
O
Figure 5 Figure 6
STEP 6
Attach Doors (P) and (Q) by sliding
door hinges into post hinges.
(See Figure 5)
Attach Knobs to Doors (P) and
(Q) with Machine Screws.
(See Figure 6)
P
Q
Knob
Machine Screw

Assembly Instructions 5/6
STEP 7
Remove drawers from Top Unit (A).
Place Top Unit (A) and Leaf Top (B) upside down on a soft cloth.
Attach Top Unit (A) to Leaf Top (B) with Wood Screws into pre-drilled holes.
(See Figure 7)
Wood Screw
A
B
Figure 7
STEP 8
Attach top unit to
unit with Head Cap Bolts.
Level unit by adjusting the adjustable
levelers on bottom of unit.
(See Figure 8)
Note: Unit must be level
to work properly.
Figure 8
Head Cap Bolt

Assembly Instructions 6/6
STEP 9
Attach Knobs to drawers with Machine Screws.
Knob
Machine Screw
STEP 10
Slide drawers into position.

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319