Home Styles 5033-941 User manual

Kitchen Island
Tools required for unpacking: Phillips screwdriver, hammer
IMPORTANT
A2.
Top
1 pc.
A1.
Top
1 pc.
50 94133-
For assembly see instructions in carton 50 942.33-
Care Instructions
Granite is a natural stone material with naturally occurring fissures and cavities.
A sealer has been applied to the granite to reduce the absorption of liquids.
Even with sealer applied, liquids can absorb into the granite causing permanent
stains. Never allow liquids to remain on the top. A stone sealer can be reapplied
periodically to the granite to reduce the absorption of liquids.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List

STEP 1
Remove top carton.
STEP 2
Remove wood screws.
Remove upper wood supports by prying with
a hammer. (See Figure 1)
Note: Do not hit top with hammer.
Figure 1
Unpacking Instructions
Top Carton
Wood Crate
Wood Screw
Wood Support
Foam
STEP 3
Remove foam, Top (A1) and Top (A2).
A1
A2

Tool(s) required for assembly: Phillips screwdriver, Level
50 94233-
Kitchen Island
Carton 50 941 is also needed for assembly.33-
Cam Lock Screw
16 pcs. (+1 extra)
Cam Lock
16 pcs. (+2 extra)
C.
Side Panel
1 pc.
Handle
2 pcs.
Knob
2 pcs.
M4x25
Machine Screw
6 pcs.
Adjustable Pin
20 pcs. (+1 extra)
M4x16
Wood Screw
for Hinge
27 pcs. (+2 extra)
M3.5x16
Wood Screw (short)
6 pcs. (+1 extra)
B.
Side Panel
.1 pc
H1.
Front Rail
1 pc.
H2.
Front Rail
1 pc.
D.
Side Panel
1 pc.
E.
Side Panel
1 pc.
F.
Side Panel
1 pc.
G.
Side Panel
1 pc.
I.
Back Rail
2 pcs.
N.
Back Support
1 pc.
O.
Back Support
1 pc.
J.
Back Upright
1 pc.
K.
Back Panel
2 pcs.
L.
Shelf
4 pcs.
M.
Shelf
1 pc.
T.
Door
1 pc.
S.
Plinth
2 pcs.
U.
Door
1 pc.
Q.
Plinth
2 pcs.
R.
Leg Support
1 pc.
P.
Base
1 pc.
V.
Drawer
1 pc.
Refer to later page(s) of these
instructions for drawer assembly.
M3.5x25
Wood Screw (long)
8 pcs. (+1 extra)
M6x30
Head Cap Bolt
26 pcs. (+1 extra)
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Hardware List
Part List
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.

Head Cap Bolt
PS
Q
Q
R
S
Assembly Instructions 2/7
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Insert Cam Lock Screws
into pre-drilled holes in
Side Panels (D), (E), (F)
and (G), then tighten.
(See Figure 1)
Figure 2
D
Cam Lock Screw
STEP 2
Attach Plinths (Q) and (S) to
Base (P) with Head Cap Bolts.
(See Figure 2)
Attach Leg Support (R) to
unit with Head Cap Bolts.
Figure 1
F
EG

B
C
Head Cap Bolt
Assembly Instructions 3/7
STEP 3
Attach Side Panel (E) to unit with Head Cap Bolts.
Attach Back Rail (I) to unit with Cam Lock. (See Figure 3)
Attach Back Upright (J) to unit.
Slide Back Panels (K) into position.
Attach Back Rail (I) to unit with Cam Lock.
Attach Side Panel (G) to unit with Cam Locks and Head Cap Bolts.
STEP 4
Attach Side Panels (B) and (C) to unit with Head Cap Bolts.
Figure 3
I
I
K
K
Cam Lock
Head Cap Bolt
E
G
J

H1
H2
F
D
Head Cap Bolt
Cam Lock
Assembly Instructions 4/7
O
N
STEP 6
Turn unit to its upright position.
Attach Back Supports (N) and (O)
to unit with Wood Screws for Hinge.
(See Figure )4
STEP 5
Attach Side Panel (D) to unit
with Head Cap Bolts.
Attach Front Rails (H1) and
(H2) to unit with Cam Locks.
Attach Side Panel (F)
to unit with Head Cap Bolts
and Cam Locks.
Wood Screw for Hinge Figure 4

Assembly Instructions /57
STEP 7
Insert Adjustable Pins into side panels at desired level.
Place Shelves (L) and (M) into position.
Attach Doors (T) and (U) to unit by sliding door hinges into side panel hinges.
(See Figure )5
Attach Knobs to Doors (T) and (U) with Machine Screws.
(See Figure )6
Figure 5 Figure 6
M
L
T
U
Knob
Machine Screw
Adjustable Pin
L
L
L

Part List
Assembly Instructions /67
V1.
Drawer Front
1 pc.
V2.
Drawer Back
1 pc.
V3.
Drawer Side
1 pc.
V4.
Drawer Side
1 pc.
V5.
Drawer Bottom
1 pc.
STEP 10
Attach Handles with Machine Screws.
STEP 9
Slide Drawer Bottom (V5) into groove.
Attach Drawer Bottom (V5) to
unit with Wood Screws (short).
Drawer (V)
STEP 8
Attach Drawer Front (V1) and Drawer
Back (V2) to Drawer Side (V3)
with Wood Screws (long).
Attach Drawer Side (V4) to unit
with Wood Screws (long).
Wood Screw (long)
Bottom
Wood Screw (short)
Machine Screw
Handle
Roller at back
Bottom Bottom
V3
Bottom Bottom
V1
V2
V5
V4

Cam Lock
Assembly Instructions /77
STEP 12
Attach top unit to unit with
Cam Locks.
Slide Drawer (V) into position.
Level unit by adjusting the adjustable
levelers on bottom of unit.
(See Figure )8
STEP 11
Place Tops (A1) and (A2) upside down on a soft cloth.
Attach Top (A2) to Top (A1) with
Wood Screws for Hinge. (See Figure )7
Insert Cam Lock Screws into pre-drilled holes
, then tighten.in Top (A1)
Cam Lock Screw
Wood Screws for Hinge
A1
A2
V
Figure 7
Figure 8

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 30 days of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460