Home Styles 885010941 User manual

88 5010 941
Woodridge Kitchen Island
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
For assembly see instructions in carton 88 5010 942
Part List
A.
Top
1 pc.
B.
Top
1 pc.
Hardware List
Hex Wrench
1 pc.
Head Cap Bolt (short)
4 pcs. (+1 extra)
Cam Lock Screw
36 pcs.(+1 extra) Magnet
2 pcs.
Machine Screw
8 pcs.
Pull Handle
4 pcs.
Small
Hex Wrench
1 pc.
Adjustable Pin
20 pcs. (+1 extra)
Wood Screw for Plinth
2 pcs. (+1 extra)
Wood Screw for Magnet
8 pcs. (+1 extra)
Wood Screw (short)
8 pcs.(+1 extra)
Wood Screw (long)
16 pcs.(+1 extra)
Cam Lock
36 pcs.(+1 extra)
Head Cap Bolt
10 pcs. (+1 extra)

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
H.
Front Frame
1 pc.
F.
Back Panel
1 pc.
G.
Back Panel
1 pc.
N.
Middle Panel
1 pc.
I.
Rail
2 pcs.
P.
Front Rail
1 pc.
Q.
Divider
1 pc.
R.
Support
1 pc.
S.
Support
2 pcs. T.
Door
1 pc.
U.
Door
1 pc.
V.
Door
1 pc.
W.
oor
1 pc.
X.
Shelf
3 pcs.
Z.
Drawer
2 pcs.
Y.
Shelf
2 pcs.
L.
Side Frame
1 pc.
M.
Side Frame
1 pc.
C.
Base
1 pc.
J.
Base
1 pc.
D.
Plinth
1 pc.
E.
Plinth
1 pc.
O.
Back Stretcher
1 pc.
Part List (in this carton)
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Also need the following from carton 88 5010 941
Part List in carton 88 5010 941
Top (A)
Top (B)
1 pc.
1 pc.
Hardware List in carton 88 5010 941
Hex Wrench
Small
Magnet
Cam Lock
Cam Lock Screw
Head Cap Bolt (short)
Hex Wrench
Head Cap Bolt
Adjustable Pin
Machine Screw
Pull Handle
Wood Screw for Magnet
Wood Screw (long)
Wood Screw (short)
Wood Screw for Plinth
1 pc.
1 pc.
2 pcs.
37 pcs.
37 pcs.
11 pcs.
5 pcs.
21 pcs.
9 pcs.
17 pcs.
9 pcs.
3 pcs.
8 pcs.
4 pcs.
K.
Plinth
1 pc.
(Knock-Down Construction,
please refer to the last page
of these instructions for
drawer assembly steps)
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
88 5010 942
Woodridge Kitchen Island

IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Assembly Instructions 2/6
Cam Lock Screw
Magnet
Magnet
Wood Screw for Magnet
Attach Back Panel (F) to Back Panel (G) as shown.
Attach 2X Magnets to
Back Panel (F) and (G) by using
Wood Screws in the pre-drilled holes
(See figure 1).
Insert Cam Lock Screws into
the pre-drilled holes of
Back Panel
(F) and (G).
Insert Cam Lock Screws into the
pre-drilled holes of Front Frame(H),
Plinth (D) and (E).
Figure 1
STEP 2
STEP 3
Attach Plinth (D) and (E)
to Base (C) with Cam Locks.
(See figure 2)
Figure 2
Cam Lock Screw
Cam Lock
F
G
E
D
H
E
DC

Assembly Instructions 3/6
EH
STEP 4
STEP 5
Attach Rails (I) and base unit in Step 3
to back panel unit in Step 2 with
Cam Locks.
Place Front Frame (H) onto unit
with Cam Locks.
I
H
H
I
I
Insert Cam Lock Screws into the
pre-drilled holes of Plinth (K), Side Frame (L) and (M), Back Stretcher (O).
K
L
M
O

Assembly Instructions 4/6
STEP 5
STEP 6
STEP 7
Attach Middle Panel (N) to Base (J)
with Head Cap Bolts.
Attach Plinth (K) and Side Panel (L)
to Base (J) with Cam Locks and
Wood Screw.
Attach Front Rail (P) to unit
with Cam Lock.
Attach Back Stretcher (O) and
Divider (Q) to unit with Cam Locks.
Attach Side Panel (M) to unit
with Cam Lock and Wood Screw.
Place Top (B) onto unit with Head Cap Bolts.
K
N
L
Head Cap Bolt
Wood Screw
Wood Screw
P
O
Q
M
B
J

Assembly Instructions 5/6
STEP 8
STEP 9
STEP 10
Assemble Supports (R) and (S) with
Cam Lock Screws and Cam Locks.
Attach unit in Step 4, Step 7 and
support unit with Cam Lock and
Head Cap Bolts (short).
Head Cap Bolt
(short)
Head Cap Bolt
(short)
Head Cap Bolt
Cam Lock Screw
Cam Lock Screw
Cam Lock
Cam Lock
A
Attach Doors (U) and (T) by
sliding the door lift hinges into
the side panels lift hinges.
(See figure 3)
Place Top (A) onto unit with
Head Cap Bolts.
Insert Adjustable Pins into
side panels at the desired level.
Place Shelves (X) into position.
Figure 3
Figure 4
Figure 5
Adjustable Pin
Adjustable Pin
Attach Doors (V) and (W) by sliding
the door lift hinges into the side panels
lift hinges.
Assemble Pull Handles to Doors with
Machine Screws. (See figure 4)
Insert Adjustable Pins into
side panels at the desired level.
Place Shelves (Y) and Drawers (Z)
into position.
To level the unit, adjust the adjustable
levelers on the bottom of unit. (See figure 5)
S
S
R
X
X
X
U
T
ZZ
V
W
Y
Y

Z5.
Base Part
2 pcs.
Z2.
Back Part
2 pcs.
Z3.
Side Part
2 pcs.
Z4.
Side Part
2 pcs.
Assembly Instructions 6/6
Figure 1
Figure 2
MAKE SURE ROLLER
IS ON THE BACK
Z2
Z2
Z2
Z3
Z3
Z3
Z4
Z4
Z4
Z5
Z5
Z1
Z1
Z1
Drawer (Z)
Part List
Figure 3
Figure 4
Attach Z1 to Z3 andZ4,
using a
and wood screws ,
tighten halfway.
Attach Z2 to Z3 and Z4 using
wood screws ,
tighten halfway. (see Figure 1)
Phillips screwdriver
(4X)
(4X)
long
long
Insert wood screws (4X)
into the pre-drilled holes in Z5,
tighten screws. (see Figure 3)
short
Slide Z5 into the grooves in Z3
and Z4. Be sure to push T5 all
the way forward so it meets Z1.
(see Figure 2)
STEP 1
STEP 2
STEP 3 STEP 4
Tighten all screws used in drawer assembly.
Assemble Pull Handle with
machine screws. (see Figure 4)
Z1.
Front Part
2 pcs.

Part List
Counter Stool
Casual Oak & White
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Hardware List
Tools required for assembly : Phillips screwdriver
A.
Seat
1 pc.
D.
Back Frame
.1 pc
F.
Side Stretcher
1 pc.
E.
Side Stretcher
1 pc.
Head Cap Bolt
4 pcs.(+1 extra) Spring Washer
11 pcs.(+1 extra)
Flat Washer
11 pcs.(+1 extra)
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Head Cap Bolt
(long)
4 pcs.(+1 extra)
Wood Screw
6 pcs.(+1 extra)
Head Cap Bolt
(Short)
3 pcs.(+1 extra)
B.
Leg
1 pc.
C.
Leg
1 pc.
G.
Front Stretcher
1 pc.
88 5002 89
Key Wrench
1 pc.
Small
Hex Wrench
1 pc.

Assembly Instructions
STEP 1
STEP 2
Attach the Back Frame (D) to the
unit with Flat Washers, Spring Washers ,
Head Cap Bolts (Short),
Head Cap Bolts (long) and Wood Screws.
(see Figure 2) and (see Figure 3)
Tighten up all Head Cap Bolts.
Wood Screw
Figure 1
D
Flat Washer
Spring Washer
Head Cap Bolt
Head Cap Bolt Assembly
(Legs Part)
Flat
Washer
Spring
Washer
Head Cap Bolt
(long)
Hex Wrench
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
A
Wood Screw
Flat Washer
Spring Washer
Head Cap Bolt
Flat Washer
Spring Washer
Head Cap Bolt
(Short)
Hex Wrench
Wood Screw
Flat Washer
Spring Washer
Head Cap Bolt (short)
B
CF
G
E
Attach Leg (B) and (C) to Seat (A)
with Flat Washers ,Spring Washers and
Head Cap Bolts.
Tighten Head Cap Bolts only half way
Attach Front Stretcher (G) to the unit
with Wood Screws.
Attach Side Stretcher (F) to Leg (C) and
Side Stretcher (E) to Leg (B) with Wood
Screws.(see Figure 1)
Figure 2 Figure 3