Home Styles 88 5648 49C User manual

BASE UNIT PART LIST
HARDWARE LIST
Hex Wrench
1 pc. Wood Plug
8 pcs. (+1 extra)
Head Cap Bolt
(long)
8 pcs.(+1 extra)
D.
Front Panel
1 pc.
E.
Back Panel
1 pc.
Tools Required For Assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
88 5648 49C
Hall Tree Storage Bench
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Small
Hex Wrench
1 pc.
C.
Side Panel
1 pc.
B.
Side Panel
.1 pc
A.
Seat
1 pc.
F.
Base
1 pc.
Head Cap Bolt
(short)
4 pcs.(+ 1 extra)
Wood Screw
(for Spring Support)
8 pcs.(+1 extra)
Cross Dowel
8 pcs.(+2 extra)
Spring Support
2 pcs.

Assembly Instructions
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to tighten up
the Head Cap Bolts in the future.
STEP 1
Attach Spring Support to the unit with
Wood Screws
(see Figure 1.1, 1.2, 1.3)
into the pre-drilled holes.
STEP 4
Figure 1.2
Figure 1.3
Figure 1.1
Wood Screw
for Spring
Support
Spring Support
A
F
Head Cap Bolt
(short)
EE
DC
B
Insert Cross Dowels into the
holes of Front Panel (D) and
Back Panel (E).
Attach the Side Panel (B) and (C)
to the Front Panel and Back Panel
with Head Cap Bolts.
Cross Dowel
Assembly
Cover all holes with Plugs.
STEP 3
STEP 2
Attach the Seat (A) to the assembled unit
with Head Cap Bolts (short).
Put the Base (F) into the storage.
Head Cap Bolt
(long)
Cross Dowel
Spring Support

TOP UNIT PART LIST
L.
Back Stretcher
2 pcs.
J.
Upper
Back Frame
1 pc.
G.
Top
1 pc.
K.
Lower
Back Frame
1 pc.
N.
Arm
1 pc.
88 5648 49C
Hall Tree Storage Bench
Head Cap Bolt
(short)
4 pcs.(+1 extra)
Wood Screw
8 pcs.
(+1 extra)
Wood Plug
12 pcs.
(+1 extra)
Hook
4 pcs.
HARDWARE LIST
Head Cap Bolt
(long)
20 pcs.(+1 extra)
Tools Required For Assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
I.
Side Panel
1 pc.
H.
Side Panel
.1 pc
M.
Arm
1 pc.

Assembly Instructions 2/3
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to tighten up
the Head Cap Bolts in the future.
STEP 1
STEP 2
Attach the Hooks to the
Upper Back Frame (J)
with Wood Screws.
STEP 3
L
L
K
J
J
Assemble the Back Stretcher (L),
Upper Back Frame (J) and Lower
Back Frame (K).
Hook
Assembly
Attach the Side Frame (H) and (I)
to the assembled unit with Head Cap Bolts. I
H
Wood Screw
Head Cap Bolt (long)
Hook

Assembly Instructions 3/3
STEP 4
STEP 5
M
N
G
H
I
Place the Top Unit on the Base Unit.
Tighten up all the Head Cap Bolts.
STEP 6
Cover all holes with Plugs.
Head Cap Bolt (long)
Head Cap Bolt (long)
Attach the Top (G) to the
Attach the Arm (M) and (N) to the Side Panels
with Head Cap Bolts.
Side Panel (H) and (I)
with Head Cap Bolts as shown.
Head Cap Bolt (short)