Home Styles 20 05149 0001 User manual

Hardware List
Part List
20 05149 0001
IMPORTANT
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
File Cabinet
Tool(s) required for assembly: Phillips screwdriver, Level
Hex Wrench
1 pc.
Dowel
6 pcs. (+1 extra)
M6x28
Tapered Bolt
8 pcs. (+1 extra)
M6x16
Head Cap Bolt
4 pcs. (+1 extra)
Spring Washer
4 pcs. (+1 extra)
Flat Washer
4 pcs. (+1 extra)
Small Hex Wrench
1 pc.
H.
Drawer
1 pc.
C.
Side Box
1 pc.
E.
Side Frame
1 pc.
F.
Side Frame
1 pc.
Refer to later page(s) of these
instructions for rawer assembly.d
Handle
1 pc.
M4x32
Machine Screw
2 pcs.
M3x25
Flat Head Screw
28 pcs. (+1 extra)
A.
Top
1 pc.
B.
Side Box
1 pc.
D.
Back Panel
1 pc.
G.
Shelf
1 pc.
I.
Metal Strip
2 pcs.

Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Place Shelf (G) upside down on a soft cloth.
Attach Side Boxes (B) and (C) to Shelf (G) with Tapered Bolts,
tightening bolts only halfway.
(See Figure 1)
Attach Back Panel (D) to unit with Dowels and Flat Head Screws.
Tighten all bolts.
Figure 1
Flat Head Screw
Dowel
Tapered Bolt B
C
D
G

Assembly Instructions 3/5
E
F
Tapered Bolt
Flat Washer
Spring Washer
Head Cap Bolt
STEP 2
Attach Side Frames (E) and (F) to unit with Tapered Bolts,
tightening bolts only halfway.
Attach Top (A) to unit with Head Cap Bolts, Spring Washers and Flat Washers,
tightening bolts only halfway.
Tighten all bolts.
A

Assembly Instructions 4/5
Drawer (H)
STEP 3
Attach Drawer Sides (H4) and
(H5) to Drawer Back (H3)
with Flat Head Screws.
Slide Drawer Bottom (H6) into groove.
Attach Drawer Front (H2) to unit
with Flat Head Screws.
STEP 5
Attach Handle with Machine Screws.
H1.
Drawer Front
1 pc.
H2.
Drawer Front
1 pc.
H3.
Drawer Back
1 pc.
H6.
Drawer Bottom
1 pc.
H3
H2
H6
H4
H5
H1
Flat Head Screw
Arrow label to front
Flat Head Screw
Dowel
Machine Screw
Handle
H5.
Drawer Side
1 pc.
H4.
Drawer Side
1 pc.
STEP 4
Place Drawer Front (H1) face down
on a soft cloth.
Attach unit to Drawer Front (H1)
with Dowels and Flat Head Screws.
Arrow label to front

Assembly Instructions 5/5
STEP 6
Turn unit from Step 2 to its’ upright position.
Slide Drawer (H) into position.
Note: To remove Drawer (H) in future, push plastic lever on left side up, push plastic
lever on right side down and pull open. (See Figures 2 and 3)
Place Metal Strips (I) into position.
Metal strips can be adjusted for letter or legal files.
Level unit by adjusting the adjustable levelers on bottom of unit. (See Figure 4)
Note: Unit must be level to work property.
H
Figure 4
Legal Size
Letter Size
I
Figure 2 Figure 3
Left Side Right Side

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319