Home Styles 88 5527 101 User manual

Part List
K.
Back Panel
2 pcs.
I.
Base
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc.
88 5527 101
Homestead
Entertainment Credenza
Hardware List
For assembly see instructions in carton 88 5527 102
H.
Front Rail
1 pc.
J.
Back Panel
1 pc.
T.
Plinth Support
1 pc.
U.
Plinth
1 pc.
Cam Lock
26 pcs.(+6 extra)
Cam Lock Screw
26 pcs.(+2 extra)
Adjustable Pin
20 pcs.(+1 extra)
Pull Handle
4 pcs.
Machine Screw
4 pcs.
Wood Screw
(long)
4 pcs.(+1 extra)
Wood Screw
for Magnet
8 pcs.(+1 extra)
Magnet
4 pcs.
Wood Block
2 pcs.
Hex Wrench
1 pc.
Head Cap Bolt
3 pcs. (+1 extra)
M.
Shelf
1 pc.
Wood Screw
for Back Panel
12 pcs.(+1 extra)
Tools required for assembly : Tools recommended for assembly :Phillips screwdriver Level
Wood Screw
for Wood Block
12 pcs.(+1 extra)
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319

Part List (in this carton)
B.
Side Panel
.1 pc
D.
Middle Panel
.1 pc
E.
Middle Panel
.1 pc
G.
Back Panel
1 pc.
C.
Side Panel
1 pc.
N.
Door
1 pc.
O.
Door
1 pc.
P.
Door
1 pc.
Q.
Door
1 pc.
R.
Leg
4 pcs.
S.
Leg
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
F.
Fixed Shelf
1 pc.
M.
Shelf
3 pcs.
88 5527 102
Homestead
Entertainment Credenza
L.
Shelf
1 pc.
Tools required for assembly : Tools recommended for assembly :Phillips screwdriver Level
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
V.
Wood Block
4 pcs.
Also need the Parts and Hardware in carton 88 5527 101

STEP 2
STEP 1
Assembly Instructions 2/5
A
H
Cam Lock Screw
Wood Screw (long)
Cam Lock
Insert Cam Lock Screws into the pre-drilled holes of Top (A).
Attach Front Rail (H) onto Top (A) with Cam locks (see figure 2).
Wood Block
with Magnet
Attach 2X Magnets to the both Wood Blocks by using
Wood Screws (short) into the pre-drilled holes.
Attach 2X Wood Block with
Magnets to Front Rail (H) by
using Wood Screws (long) into the
pre-drilled holes (See figure 1).
Attach 2X Wood Blocks (V) to Top (A) by
using Wood Screws for Wood Block into the
pre-drilled holes.
Figure 1 Figure 2
Wood Screw
(short)
Wood Block
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up
the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
V
V
Wood Screw
for Wood Block
Wood Block

Assembly Instructions 3/5
STEP 3
STEP 4
B
E
D
I
C
Attach 2X Wood Blocks (V) to Base (I) by using Wood Screws for
Wood Block into the pre-drilled holes.
Insert Cam Lock Screws into
the pre-drilled holes of Side Panel (B) and (C),
Middle Panel (D) and (E), Base (I).
T
U
Cam Lock Screw
Head Cap Bolt
Head Cap Bolt
Cam Lock Screw
Figure 3
Hex Wrench
D
E
Cam Lock Screw
Cam Lock
G
F
STEP 5
Attach 2X Magnets to Fixed Shelf (F) by using
Wood Screws (short) in the pre-drilled holes.
Attach Fixed Shelf (F) to Middle Panel (D) with Cam Locks, then slide Back Panel (G)
into position.
Attach Middle Panel (E) to the unit with Cam Locks.
Magnet
Attach Support Plinth (T) to Plinth (U)
using Head Cap Bolts. (See figure 3)
Insert Cam Lock Screws
into the pre-drilled
holes of
Support
Plinth (T).
V
V
Wood Screw
for Wood Block
Wood Block

STEP 6
Assembly Instructions 4/5
Cam Lock
Attach Base (I) to the unit with Cam Locks.
Attach Side Panel (B) and (C) to the unit with Cam Locks,
then attach the plinth unit to the unit with Cam Locks.
Tighten up Legs (R) and (S) in the pre-drilled holes of unit as shown.
I
BS
R
R
R
R
C
A
Adjustable Pin
Cam Lock
STEP 7
Slide Back Panels
(J) and (K) into place.
Place Top (A) onto
the unit, using
Cam Locks.
Insert Adjustable Pins into
side panels and middle panels at the desired level. (See figure 4)
Place Shelves (L) and (M) into position.
L
J
K
M
M
M
M
K
Figure 4

O
P
Q
Attach Doors (N), (O), (P) and (Q) by sliding
the door lift hinges into the side panels lift hinges. (See figure 5)
Assemble Pull Handles to Doors with Machine Screws. (See figure 6)
STEP 8
STEP 9
Assembly Instructions 5/5
N
Figure 6
Figure 5
Figure 8
To level the unit, adjust the adjustable levelers on
the bottom of legs. (See figure 7)
Insert 12X Wood Screws from the back of the unit,
tighten up all the Wood Screws. (See figure 8)
Note: Please make sure unit is level before tightening these screws.
Figure 7