Home Styles 88 5411 80 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc. Head Cap Bolt
8 Pcs. (+1 extra) Spring Washer
8 Pcs. (+1 extra) Flat Washer 8 Pcs. (+1 extra) Wood Screw 4 Pcs. (+1 extra)
Tools required for assembly : Phillips screwdriver
88 5411 80
Cabin Creek
Dining Chair
E.
Back Frame
1 Pc.
A.
Seat
1 Pc.
D.
Stretcher
2 Pcs.
B.
Leg
1 Pc.
C.
Leg
1 Pc.

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
STEP 2
Attach Seat (A) to unit
with Wood Screws.
Attach Back Frame (E) to unit with
Head Cap Bolts, Spring Washers
and Flat Washers.
Turn the unit to its’ upright position.
STEP 1
Attach Stretchers (D) to Leg (B) with
Head Cap Bolts, Spring Washers and
Flat Washers. (see Figure 1)
Attach Leg (C) to unit with Head Cap Bolts,
Spring Washers and Flat Washers.
B
B
B
D
B
D
B
A
B
C
B
E
/2
Wood Screw
Flat Washer
Spring Washer
Head Cap Bolt
Figure 1