Home Styles 20 05507 0401 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
20 05507 0401
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Twin Headboard
F.
Support
2 pcs.
B.
Upper Stretcher
1 pc.
C.
Lower Stretcher
1 pc.
A.
Headboard
1 pc.
D.
Post
1 pc.
E.
Post
1 pc.
Hex Wrench
1 pc.
Wrench
1 pc.
M8x80
Bolt
4 pcs. (+1 extra)
Nut
4 pcs. (+1 extra)
M6x30
Head Cap Bolt (short)
8 pcs. (+1 extra)
Shaped Washer
10 pcs. (+1 extra)
M8x60
Head Cap Bolt
6 pcs. (+1 extra)
Small Hex Wrench
1 pc.

Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Wrench and Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Insert Bolts into pre-drilled holes in
Ports (D) and (E), then tighten.
(See Figure 1)
STEP 3
Attach Post (D) to unit
with Shaped Washers
and Head Cap Bolts.
Tighten all Head Cap Bolts.
E
D
B
C
STEP 2
Attach Post (E) to
Upper Stretcher (B)
and Lower Stretcher (C)
with Shaped Washers
and Head Cap Bolts.
Tighten all Head Cap Bolts.
(See Figure 2)
Figure 1
Figure 2
E
D
Shaped Washer
Head Cap Bolt
Bolt
Head Cap Bolt
Shaped Washer

Assembly Instructions 3/3
STEP 5
Attach Supports (F) to unit
with Head Cap Bolts (short), then tighten.
(See Figure 4)
STEP 4
Attach Headboard (A) to unit
with Shaped Washers and Nuts,
then tighten.
(See Figure 3)
Figure 4
F
F
A
Head Cap Bolt (short)
Nut
Figure 3
Shaped Washer

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319