Home Styles 88 5530 182 User manual

Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
88 5530 182
Pedestal Desk
Carton 88 5530 181 is also needed for assembly.
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
D.
Side Panel
1 pc.
E.
Side Panel
1 pc.
F.
Front Rail
2 pcs.
G.
Front Rail
1 pc.
S.
Door
1 pc.
Refer to later page(s) of these
instructions for drawer assembly.
R.
Shelf
1 pc.
H.
Base
2 pcs.
I.
Back Panel
2 pcs.
J.
Plinth
2 pcs.
T.
Drawer
2 pcs.
U.
Drawer
1 pc.
V.
Drawer
1 pc.

Assembly Instructions 2/8
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
Cam Lock Screw
Cam Lock Screw
C
B
J
I
O
A
Magnet
Wood Screw
for Magnet
Figure 2
Cam Lock Screw
Figure 1
D
E
Cam Lock Screw
STEP 1
Insert Cam Lock Screws into the pre-drilled
holes of Top (A), Side Panels (B), (C), (D), (E),
Back Panel (I), Plinth (J) and
Keyboard Support (O).
(See Figure 1)
Attach Magnet to Side Panel (C)
with Wood Screws for Magnet.
(See Figure 2)

Assembly Instructions 3/8
Cam Lock
Tapered Wood Screw (long)
B
C
J
F
H
I
STEP 2
Attach Front Rail (F), Base (H), Back Panel (I)
and Plinth (J) to Side Panel (B) with Cam Locks. (See Figure 3)
Attach Side Panel (C) to unit with Cam Locks.
Insert Tapered Wood Screws (long) into pre-drilled holes of unit, then tighten.
Figure 3
D
E
J
F
H
G
I
Cam Lock
STEP 3
Attach Front Rails (F), (G), Base (H), Back Panel (I)
and Plinth (J) to Side Panel (D) with Cam Locks.
Attach Side Panel (E) to unit with Cam Locks.
Insert Tapered Wood Screws (long) into pre-drilled holes of unit, then tighten.
Tapered Wood Screw (long)

Assembly Instructions 4/8
Figure 4
I
Figure 5
Head Cap Bolt
Cam Lock
M
N
PQ
O
STEP 4
Attach Keyboard Rails (M) and (N) to Keyboard Boxes (P) and (Q)
with Head Cap Bolts. (See Figure 4)
Attach Keyboard Support (O) to unit with Cam Locks.
Attach unit from Steps 2 and 3 to unit with Head Cap Bolts.
Figure 6
Wood Screw (short)
A
LL
K
Cam Lock
STEP 5
Attach Top (A) to unit with Cam Locks.
Attach Keyboard (K) to Keyboard (L)
with Wood Screws (short).
(See Figure 5)
Attach Knobs to keyboard
with Machine Screws.
(See Figure 6)
Slide keyboard into position.

Part List
Assembly Instructions 5/8
Drawer (T)
STEP 7
Slide Drawer Bottom (T5) into the grooves
of Drawer Sides (T3) and (T4) until it meets
Drawer Front (T1).
Attach Drawer Bottom (T5) to unit with
Wood Screws (short).
STEP 8
Attach Knob with Machine Screw.
T1.
Drawer Front
2 pcs.
T2.
Drawer Back
2 pcs.
T3.
Drawer Side
2 pcs.
T4.
Drawer Side
2 pcs.
T5.
Drawer Bottom
2 pcs.
T1
T2
T3
T4
T5
STEP 6
Attach Drawer Front (T1) and Drawer
Back (T2) to Drawer Side (T3) with
Wood Screws (long).
Attach Drawer Side (T4) to unit with
Wood Screws (long).
T1
T2
T3
T4
Roller at back
Bottom

Part List
Assembly Instructions 6/8
Drawer (U)
STEP 9
Attach Drawer Front (U1) and Drawer
Back (U2) to Drawer Side (U3) with
Wood Screws (long).
Attach Drawer Side (U4) to unit with
Wood Screws (long).
STEP 10
Slide Drawer Bottom (U5) into the grooves
of Drawer Sides (U3) and (U4) until it meets
Drawer Front (U1).
Attach Drawer Bottom (U5) to unit with
Wood Screws (short).
STEP 11
Attach Knob with Machine Screw.
U1.
Drawer Front
1 pc.
U2.
Drawer Back
1 pc.
U3.
Drawer Side
1 pc.
U4.
Drawer Side
1 pc.
U5.
Drawer Bottom
1 pc.
U1
U2
U3
U4
U5
U1
U2
U3
U4
Roller at back
Bottom

Part List
Assembly Instructions 7/8
STEP 14
Attach Knob with Machine Screw.
V1.
Drawer Front
1 pc.
V2.
Drawer Back
1 pc.
V3.
Drawer Side
1 pc.
V4.
Drawer Side
1 pc.
V5.
Drawer Bottom
1 pc.
STEP 15
Place Metal Strips (W) into position.
The Metal strip can be adjusted for
letter size or legal size files as shown.
STEP 13
Slide Drawer Bottom (V5) into the grooves
of Drawer Sides (V3) and (V4) until it meets
Drawer Front (V1).
Attach Drawer Bottom (V5) to unit with
Wood Screws (short).
Drawer (V)
V1
V2
V3
V4
STEP 12
Attach Drawer Front (V1) and Drawer
Back (V2) to Drawer Side (V3) with
Wood Screws (long).
Attach Drawer Side (V4) to unit with
Wood Screws (long).
Bottom
Legal Size
Letter Size
W
V1
V2
V3
V4
V5

Assembly Instructions 8/8
Figure 7 Figure 8 Figure 9
T
T
U
V
S
R
Adjustable Pin
STEP 16
Insert Adjustable Pins into side panels at the desired level. (See Figure 7)
Place Shelf (R) into position.
Attach Knob to Door (S) with Machine Screw. (See Figure 8)
Attach Door (S) to unit by sliding the door lift hinges into the side panel lift hinges.
(See Figure 9)
Slide Drawers (T), (U) and (V) into position.

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319