Home Styles 88 5180 101 User manual

Part List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
Hardware List
Hex Wrench
1 pc.
Head Cap Bolt (long)
8 pcs. (+1 extra)
Cam Lock
14 pcs.(+1 extra)
Cam Lock Screw
14 pcs.(+1 extra)
Machine Screw
8 pcs.
Wood Screw
16 pcs. (+1 extra)
Adjustable Pin
20 pcs. (+2 extra)
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
For assembly see instructions in carton 88 5180 102
Small
Hex Wrench
1 pc.
Door
Pull Handle
4 pcs.
A.
Top
1 pc.
F.
Front Piece
1 pc.
G.
Back Stretcher
2 pcs.
H.
Back Piece
1 pc.
K.
Back Panel
1 pc.
N.
Shelf
1 pc.
O.
Shelf
4 pcs.
P.
Base
1 pc.
I1.
Back Piece
1 pc.
J.
Back Panel
2 pcs.
I2.
Back Piece
1 pc.
Cross Dowel
8 pcs. (+1 extra)
Head Cap Bolt
4 pcs. (+1 extra)
88 5180 101
Art & Crafts
Entertainment Credenza
(Cottage Oak)

Part List (in this carton)
Also need the following from carton 88 5180 101 :
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Hardware List in carton 88 5180 101
Hex Wrench
Small Hex Wrench
Head Cap Bolt
Head Cap Bolt (long)
Cross Dowel
Cam Lock
Cam Lock Screw
B.
Side Panel
.1 pc
C.
Side Panel
1 pc.
E.
Middle Panel
.1 pc
D.
Middle Panel
.1 pc
Q1.
Leg
2 pcs.
R.
Door
1 pc.
S.
Door
1 pc.
T.
Door
1 pc.
U.
Door
1 pc.
Casual Attire For Today's Home
Part List in carton 88 5180 101
Top (A)
Back Stretcher (G)
Back Panel (K)
Front Piece (F)
Back Piece (H)
Back Piece (I1)
Back Piece (I2)
1 pc.
1 pc.
2 pcs.
1 pc.
1 pc.
1 pc.
1 pc.
Part List in carton 88 5180 101
Back Panel (J)
Shelf (N)
Shelf (O)
Base (P)
2 pcs.
1 pc.
4 pcs.
1 pc.
L.
Back Panel
1 pc.
M.
Shelf
1 pc.
Hardware List in carton 88 5180 101
Wood Screw
Adjustable Pin
Door Pull Handle
Machine Screw
1 pc.
1 pc.
4 pcs.
8 pcs.
8 pc.
14 pc.
14 pc.
16 pc.
20 pc.
4 pcs.
8 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Q2.
Leg
1 pc.
88 5180 102
Art & Crafts
Entertainment Credenza
(Cottage Oak)

Assembly Instructions 2/4
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
STEP 1
Insert Cam Lock Screws
into the pre-drilled holes of Top (A).
STEP 2
Insert Cam Lock Screws into the pre-drilled holes of Side Panel (B) and (C) and
Middle Panels (D), (E).
A
B
C
D
E
Cam Lock Screw
Cam Lock Screw
Cam Lock Screw

B
G
G
I1
I2
H
L
K
J
J
Assembly Instructions 3/4
Attach Lower Back Stretcher (G) to Side Panel (B) with Cam Lock.
Assemble Back Piece (H), (I1), (I2) Back Panels (K) and (L)
then attach to unit..
Slide Back Panels (J) to unit.
Attach Upper Back Stretcher (G)
to unit using Cam Lock.
STEP 3
Assemble Middle Panel (D), (E),
and Shelf (M) using Cam Locks,
then attach to unit.
Attach to unit using Cam Lock.
Attach Side Panel (C) to unit using Cam Locks.
Front Piece (F)
STEP 4
Cam Lock
M
F
D
E
C
Cam Lock

Assembly Instructions 4/4
Attach Base (P) to unit with
Head Cap Bolts and
Cross Dowels.
Attach Legs (Q1) to unit with
Head Cap Bolts.
Attach Leg (Q2) to unit.
STEP 5
Place Top (A) onto the unit, using Cam Locks.
Attach Doors (S), (T), (U) and (V) by sliding the door lift hinges
into the side panels lift hinges. (see Figure 1)
Assemble Pull Handles to Doors (S), (T), (U) and (V) with Machine Screws. (see Figure 2)
Insert Adjustable Pins into side panels and middle panels at the desired level.
Place Shelves (O) and (N)
into position.
STEP 6
STEP 7
Insert 20X Wood Screws from
the back of the unit, tighten up all
the Wood Screws.
(Figure 1)
(Figure 2)
A
ST
U
V
O
O
O
O
N
Adjustable Pin
Wood Screw
Cam Lock
Q1
Head Cap Bolt (long) P
Head Cap Bolt
Cross Dowel
Note: Please make sure unit is level
before tightening these screws.
Q1
Q2